Band saw Table band saw

JAESPA MSU4

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW Iisdpfx Afoxf Nahsaoi weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: used, Year of construction: 1995, cutting diameter 280 mm Isdpfx Afep Rai Esaeii saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: Iiodpfx Afstwbxnsaoi - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm Iedsd Nbk Tjpfx Afaoii cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm Iiodpfx Afspxmlqsaei end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: excellent (used), functionality: fully functional, Metal band saw with blade welding device. Drive motor with two speeds. Continuously adjustable. Iiedpfxewt Sgvs Afaji

Year of construction: 1977, condition: good (used), Vertical band saw JAESPA type: MSU-4 year 1977. Machine was modenized electric Ijdpocv N Nhofx Afaeii Infinitely variable speed saw band welding machine.

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Iodpfx Afsmrnk Ejasii Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Iodpod Tx D Usfx Afaeii

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm Iodpsri R Azjfx Afajii - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm - throat 410 mm - max. passage height 265 mm Iijdpfog Aid Sox Afaei - table size 600 x 600 mm - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch