Coiler

Julius #5056

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Nwodsqv E S Rspfx Abdjc Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm Nwodpfxjv Svare Abdsc distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Nwodpfxjt Tcz Us Abdsc

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V Nwjdpfxsg Ip Efo Abdjc total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Nsdpfx Ast Ipi Ijbdowc Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Nsdpfjx Hr Duex Abdswc

Condition: not inspected (used), Double knee jaw crusher Nsdpfxjr Nvk Io Abdswc Model: RB 1200/900 Feed opening: 1,200 x 900 mm

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Nedpfxjq U R T Ne Abdowc Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t Nedpfx Absfxyhfedswc motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Njdpfxot Hwq Rj Abdowc Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.