Surface planer

Kölle HA51

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Dcodpfx Aaew I Uxcsajf Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa length of ground surfaces: 3000 mm Dsdpfx Aajwt T Hdoaocf hydraulic foot pedal lift volts: 380/50 Other models available as shown in the photos second hand machines

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm Dedpfx Ajhuthyjaajcf planing shafts with strip knives immediately ready for use

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control Dcodpfx Aoxl E Syeaajf * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: good (used), Maximum diameter of saw 400mm Maximum saw projection 133mm Crosscut capacity 90° 340 x 133mm Crosscut capacity 45° 290 x 133mm Height of work table 813mm Dcedpsrl Sknofx Aaaef Motor power 4.5Kw Speed of spindle 3000 RPM Spring return for saw unit DC brake

Condition: used, Primultini surface planer with 400mm worktable, used Dcedpsq R Af Asfx Aaaof

Condition: used, Year of construction: 1980, total width: 3,350 mm, total height: 1,500 mm, Dimensions (LxBxH): 160 x 335 x 150 cm Price: On request 1e as: Single saw Dedpfx Aownh Uxjaaocf 2e as: Upper 3e as: Lower 4e as: Multibladesaw - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 10517 - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), OMGA SP500 F Crosscut Saw Cutting width: 500 mm Cutting height: 150 mm Pneumatic saw feed Pneumatic material clamping Maximum saw blade size min/max: 490-500 mm Saw blade bore diameter: 30 mm Right table length: 200 cm Dcodpfjw Dy Shjx Aaaof Left table length: 200 cm Saw motor power: 5.5 kW CE certificate

Condition: ready for operation (used), power: 0.003 kW (0.00 HP), planing width: 410 mm, rotational speed (min.): 5,500 rpm, overall weight: 700 kg, total length: 26,000 mm, chip removal for surfacing (max.): 8 mm, number of planer blades: 4, table length: 2,600 mm, SCM surface planer type F4L -Working width: 400 mm -number of knives: 4 pieces -chip removal: 0 - 8 mm -Motor: 3 kW Dcsdpfx Astxqgdoaajf -Speed of planer blade: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 700 kg Price 2500.

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Dsdpfx Aast Hk Atsaecf