Thickness planer

Kamro MB 6

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Iedpfow Nx A Iox Aa Ijia Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min Iisdpfoyfp N Dox Aa Isa - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: used, Year of construction: 1988, working width: 510 mm, Panhans surfacing and thicknessing planer, model 445-A, 51 cm planing width. Cutter block with 4 straight knives, 2 feed rates, electric table height adjustment. The motor brake is unfortunately defective!!! Otherwise, the machine is in very good condition for its age. Iodexd D Nbopfx Aa Isia

Condition: used, Year of construction: 1994, Used, good condition, top specification, low hours with 2 rubber outfeed rollers, chain feed roller, electric adjustment Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust certified Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Chain pressure bar Iijdpfx Aaeythclo Isa Chain infeed roller 2 rubber outfeed rollers Feed speed: 7/14 m/min Number of knives: 2 pcs Knife system: strip planer knife, Brück reversible knife Digital height display Electric height adjustment with handwheel fine adjustment Extraction port: D 160 mm Space requirement: approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, Year of construction: 1988, Max. working width: 630 mm; Number of knives: 4 pcs; Cutterhead: Tersa cutterhead; Motor brake: Yes; Max. thicknessing height: 240 mm; Min. thicknessing height: 3 mm; Max. chip removal: 8 mm; Thickness table adjustment: electric/manual with fine adjustment; Thickness display: mechanical numerical indicator; Fixed feed speed: 6/18 m/min; Thickness table spindles: 1 large; Infeed rollers: serrated steel; Outfeed rollers: steel; Soundproofing: Yes; Approx. weight: 900 kg; Motor power: 5.5 kW; Extraction diameter: 150 mm Storage location: Iisdpsyq Sfljfx Aa Isa

Condition: used, Year of construction: 1979, Working width 510 mm Length of the planing table 2700 mm Iiodsvxa Igepfx Aa Isa Number of knives 2 St. Dimensions (L/W/H) 2700x1100x1000 mm weight of the machine ca. 1000 kg

Condition: used, Used Weinig A510 surface planer Iiodeylwdijpfx Aa Ioa Year of manufacture: ~1970 Manufacturer: Weinig Model: A 510 Working width: 510 mm Table length: 2500 mm 2-knife cutterblock Star-delta starter Extraction connection: Ø 120 mm Weight: approx. 800 kg Dimensions (LxWxH): approx. 250 x 95 x 110 cm