Used KASTO band- hack- and circular saws

KASTO Band- / Bügel- / und Kreissägen

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. Lodpfx Asfg E Hpoh Uota • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t Ltodofg E Hwjpfx Ah Uja dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome Ltjdpfx Ahoiyynds Uea

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch Ltsdpfxjirt H As Ah Usa suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system Ltsdpfxeiim Tqj Ah Usa -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm Ledpfofg E Hnjx Ah Ujta capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width Lsdpfjfgyicjx Ah Ueta · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: good (used), We offer steel tanks for the storage of almost all common liquid media. We have all available sizes from 1000 liters - 100,000 liters permanently in stock. Ltjdpfx Ajgx E Uhjh Usa No matter how your tank is to be equipped, we will implement your wishes and the official regulations at fair prices. Whether you need an inner shell, 2K epoxy coating, exterior paint, fitting extensions or conversions, DEKRA approval, loading and transportation - we are the right partner for you.

Condition: new, The ACE Laser Compact 1313 2.0 R, a state-of-the-art Laser Cutting Machine from KNUTH, is designed to set new standards in price and performance within the Laser Cutting Machines product group. This compact laser cutter is optimized for highly efficient processes, making it ideal for both large production centers and smaller workshops due to its minimal footprint. Built on a robust steel weldment frame, the machine features a lightweight gantry constructed from aluminum die-cast, ensuring both high rigidity and superb dynamics. The linear guides on all axes provide exceptional precision and require minimal maintenance, supported by preloaded ball drives that enhance positioning accuracy. You can easily monitor the cutting process through a safety glass window, while its intuitive PC-based control allows for straightforward operation with a technology database that simplifies programming. The ACE Laser Compact 1313 2.0 R ensures top performance in laser cutting with its powerful Raycus laser source, automatic focus positioning, and efficient nesting software that minimizes material waste. To find out more about this impressive Laser Cutting Machine or to request a quote, please visit our website. Lodjnh Ng Dopfx Ah Uota

Condition: new, Year of construction: 2025, Patented mitering system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic clamping of the material High-performance frequency-controlled band drive Swivel range 30° right / 45° left Ltsdpfxeh S Nxpo Ah Uja Cutting range in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remaining piece length without bundle clamping 60mm Recommended options: Micro spray device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements