General Data
Measurements width 1.385 mm
Measurements depth 1.440 mm
Measurements height 1.715 mm
Machine weight 827 kg
Media
Main electronic connection 400 V / 50 Hz
This KASTO alu U 20 Sawing Machine was built in 2017. This machine can operate with a cutting speed of 3,070 rpm and a saw blade dimension of 550 x 4.0 x 32 mm.
Brkfwk2axs
Application Types
Sawing
Pipe cutter, pipe cutter
Jcdrprf
-Pipe diameter: 1/8 "- 2" steel
-reca : 0710 140 182
-Dimensions: 400/110/50 mm
-Weight: 2.1 kg
cutting range: 1200 x 500 mm
round material: bei 90°= 530 mm
flat material: bei 90°=1200x500 mm
round material: bei 45° re/li = 530 mm
flat material: bei 45° re/li =700x500 mm
cutting speed: 17-110 m/min
mitter cutting - both sides: 45 °
dimensions of saw-band: 8800 x 54 x 1,6 mm
bore diameter: 35 mm
spindle taper: SA 40
spindle stroke: vertical 0-350 mm
spindle revolutions per minute : 200-800 U/min
Ly87chi3
number of spindles: 3 Stück
control: 7-achsig numerisch
feed min/max: max. 300 mm/min
...
10
Quantity 1
Inventory number 843
Note on the condition of the machine: untested
Manufacturer Pehaka
type designation CBS 900
Br3fon33hp
year of manufacture: 1987
condition: used
item number: 000018679
pipe diameter max. 1,500 mm
tool diameter max. 200 mm
feed rate 40 mm / min
cutting speed 35 m / min
Notxt
compressed air requirement 6 bar - 2m³ / min
- additional data to follow -
New device
Biasrk9jbf
is controlled with 24 or 220 Volt via solenoid valve
Hose in hose system. Oil and air are led separately to the nozzle. Thus constant supply.
No mechanical parts, therefore insensitive and safe operation over many years.
Dimensions housing 300 x 200 x 120
Picture shows solenoid valve. If it no longer closes, because dirt has accumulated in the line, unscrew the solenoid and clean it. This is the cause of 99% of the faults.
work piece width 60 mm
workpiece height 15 mm
bore diameter 16 mm
saw-blade dia. 350 mm
workpiece length - max. 6.000 mm
Roll lenght Einlauf 10.000 mm
threading M12
total power requirement 15 kW
Ekd2obp
weight of the machine ca. 3,2 t
dimensions of the machine ca. 12,0 x 2,0 x 2,3 m
Link pipe cutter, pipe cutter
-cutting pipe diameter: 80 - 200 mm
-Due to the number of links, the device is adapted to the desired pipe diameter
-Steel cutting wheels
3txf9sjv
-Ideal for working in the trench
-Transport case
-Weight: 11 kg
Make: Honeywell BraukmannType: R 295 SAType of installation: 2
Cej87jmm3
Like New Demo Machines: Straight cuts such as slices, wafers, blocks and also 2d free forms and contours of hard-brittle materials such as ceramics and any crystals (Si, SiC, GaAs, GaN, sapphire, InP, glass, etc.), materials based on carbon fibers, special alloys with low inductance but very high hardness, sandwich structure materials (composite materials) and composites using ceramics and various plastics, various minerals, as well as synthetic porous and brittle materials as well as graphite e...
Sofort ab Standort frei :
Doppelgehrungssäge EISELE
Type VMSA - 450
Sägeblattdurchmesser 450 mm
Arbeitsbereich 4000 mm
Schnittbereiche flach gerade 230 x 80 mm
Gehrung 170 x 80 mm
Winkel gerade 230 x 80 mm
Gehrung 170 x 80 mm
Rohre gerade 160 mm
Gehrung 110 mm
Vollmaterial 130 mm
Sägeblattdrehzahlen 1700 / 3400 U / min
Antriebsleistung 2 x 2,6 kw
Oyzgn
Gewicht 1000 kg
Zum Preis von Euro 1.000.-- zzgl. Mwst. ab Stando...
Brush deburring machine from RSA in continuous process
Tubes outside and inside
Bh8qian2kx
pipe diameter max. 1,500 mm
tool diameter max. 200 mm
feed rate 40 mm / min
cutting speed 35 m / min
compressed air requirement 6 bar - 2m³ / min
Gowfo0v
- additional data to follow -
.
Measuring length 1000 mm
Bh33r9d3
Display 1/10 mm
.
with
pneumatic arm retraction
stop carrier can be folded away or upwards
manual clamping via hand lever with eccentric
Length measuring system with battery operation
.
--ᐳ --ᐳ For mounting on existing equipment or on roller conveyor .
.
.....
Workshop overhauled
Cutting diameter 250 mm
saw band length 3660 mm
cutting width 260 mm
Cut-off length max. 400 mm
hydraulics 0,75 kW
cutting speed 20-70 m/min
saw band dimensions approx 3700 x 25 x 1 mm
saw drive 0,5 kW
Machine weight approx. 800 kg
space requirement approx. 2 x 1,5 x 1,2 m
condition: ready for demonstration
electrics 380 volt
coolant approx. 15 l
Bky8k29
Producer: Bianco
Model: 420A 60
Year of production: 2019
Dmpdgqwbc
Belt drive motor: 0.9 ÷ 1.5 kW
Tape dimensions: 3270 x 27 x 0.9 mm
Belt speed: m / min 35 ÷ 70
Coat height. working height: 830 mm
Weight: 490 kg
Working dimensions L x W x H: 1500 x 1550 x 2000 mm
Cutting speed dependent on material: 16-100m/min, rigidity: 100-1300N/min, feed rate: 2.8-6.5m/min, material diameter: 50-400mm, workpiece height: 360mm, band saw speed: 19-130m/min, band saw length: 5400mm, connected load: 8.5kW, length: 2200mm, width: 2545mm, height: 1890mm, width: 3t.
Mvxwls
With 2 burning nozzles
Optical system
Table size 2 000 x 1000
With smoke extraction system
Is already dismantled
Bg9ir3zbmk
Make: KASTO, Type: HBA 360 AU, Year of construction: 1991, Saw-Ø 360 mm, Drawer cabinet, 4 drawers, 2 doors, 1 lot saw bands - Item 40, No. 359
By order of the entitled we sell an automatic band saw from Kasto.
The general terms and conditions of Lüders & Partner GmbH apply.
Bpz0vwi7yu
Crank shaft replaced in 2018. Complete with electrical system and hydraulic power unit.
Brf9zcaa0h
TYPE CADDY 80
Y.O.M. 2005
SERIAL NUMBER 28336
RPM CRANK SHAFT 63n/min
RPM FLYWHEEL 495 n/min
STROKE 70 mm
CUTTING CAPACITY 80 MM
ENGINE POWER 45Kw 400Volts
Machine design:
- Hydropneumatic feed
- Suction
- Pneumatic clamping horizontal
- Depth stop
Bjkyd3sfjt
- E111 tilt
Operating data:
- mains voltage 3/PEN/400V
- Frequency 50Hz
- Current 12A
- Power 5,6kW
- Compressed air 7bar
- Saw blade diameter 500mm
- Saw blade speed 2800 1/mm
Dimensions and weight:
- length/width/height (mm) approx. 910/1335/1840
- Weight approx. 550kg
Sound:
- Continuous sound level ᐳ80dB(A)
The machine is in mint condition and stored disassembled.
The sale is ex location.
...
Standard protective cladding and swivelling control panel
Electrical system: 380-400/50/3
Control range 20-120 m/min
Saw drive 4kW
Workspace lighting
Roller conveyor without drive
1000mm, 5 carrying rollers 360 x200x190 cm
Weight 3000 Kg
Extension of the roller conveyor
With 1 foot support, 5 support rollers
Technical data:
Cutting area
Round 340 mm
Flat 340x340 mm
belt speed infinitely variable 20-120 m/min
Bl8zbym3qf
Saw drive motor 5,5kW
Other motors 3,0kW
Saw roller diameter 500mm
Tape dimen...
Industrial Duty upstroke crosscut saw, for cutting aluminium sections, With oilpneumatic upstroke movement and horizontal and vertical pneumatic clamps. The machine is fitted with a 400mm TCT saw blade, with manual angle setting + / - 20 °. The cutting area is completely enclosed. There are various optional extras available such as roller tables with length stop.
Bczt7kldkj
Oilpneumatic upstroke of saw blade
400mm TCT saw blade
2.5 hp saw motor
Spray mist blade lubrication system
2 x vertical ...
make Forte, type SBA240, saw diameter max. 240 mm, coolant device, feed roller conveyor, L 3.000 mm - No. 51, Pos. 19
Nttaz
On behalf of the entitled persons we sell an automatic band saw machine from Forte.
The general terms and conditions of Lüders & Partner GmbH apply.
For framing.
Gw0ajc
Year of manufacture 2011, start-up in 2012.
Cutting capacity: 1500
Visible.
Length: 2100mm, width: 1200mm, height: 2000mm, weight: 3.35t.
D3m99imia
Manufacturer: MACC
Model: NTA 350
Year of manufacture: 07/2008
Serial number: 94917
Cutting range 45˚: 120mm (round)
Bpxsewdwvi
Speeds: 25 / 50 rpm.
Execution Accessories: Run-off track
machine number 00452
Manufacturer Piset
Model 3S-G
Engine: 220 V, 750 W
Bibotjgadk
A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity.
Precision ball bearing movement on hardened steel runners.
Sturdy cast iron construction with steel base stand.
Spring return of sawcarriage.
350mm max. saw...
Pipe cutting and beveling machine, used but full
functional in very good condition.
The machine was not in use for permanent industrial
production.
Good for Aluminium, Steel and stainless Steel tubes. Includes acessoires for Alu-tube cutting.
Technische Daten:
Inil38h
Outer tube diameter: 283 – 508 mm
Dim LxWxH ca.: 1710x940x630 mm
Power: 230 V / 50 Hz, 1,8 KW
Weight: ca. 520 KG
For detailed description see brochure, please.
Electric Hose Cutter Gates
Capacity: up to 2"
Cutting blade: 350 x 3 x 30 mm
Motor power: 4,5 KW / 380 V
Bei8uxava3
Machine LxWxH: 745 x 690 x 430 mm
Machine weight: 75 kg
This hose cutter is very suitable for cutting hydraulic hoses.
Cutting capacity 90° round/ square/ flat: 325/ 280x280/ 300x200mm.
Ov9wl
Smid Plate saw 150mm Cutting depth
Year of manufacture 1991
3.2m cutting length by 3.2m backgauge stroke
Fully equipped with 5 heavy duty clamps
Hydraulic pressure beam
Air flotation on the Machine bed and on tables.
Rear tables with Ball bearings
Absolute cutting and programmable strip cutting
Hydraulic Side alligner units on the pressure beam and on the backgauge.
Mbb control unit programmable absolute cutting and strip cutting
Variable feed control
I2pnp7b8u
Spray mist coolant Allube
Good ...
machine number 812243
Manufacturer Berg Schmid
Delta model 4″
Cutting areaTubes 1/2″ - 4″
Bolt M8 - M52
Motor: 220 V, 50 Hz, 1 kW, 7 A
Bibos9u0pj
Speed: 15 - 27 - 48 rpm
Tubes 1/2″ - 4″
Bolt M8 - M52
2x 1/2″ – 2″“
2x 1″ – 2″
1x 1/4″ – 1″
Single blade heavy duty aluminium cutting saw. Made from stabilised cast iron. The machine is suitable for cutting aluminium profiles and extrusions, with manual downstroke operation or with oilpneumatic movement with 2 hand push button control. The saw is fitted with a 3hp motor and comes complete with Ø400mm TCT saw blade, The table rotates on bearings guaranteeing long term precision, the angles are manually set with positive locking at 90° and 45°. Intermediate angles are achieved using th...
disk of circular saw-Ø: 400 u. 425 mm
cutting area at 90° round: 130 mm
cutting area at 90° square: 120 x 120 mm
cutting area in mitre at 45° round: 130 mm
cutting area in mitre at 45° square: 110 x 110 mm
cutting speeds: 11 u. 22 m/min
forward feed speeds: 670 mm/min
U2jcznkk
cutting length: m. automat. Vorschub bis 1200 mm
electrical connection: 380 V, ca. 4 kVA V
sawing drive: 1,6/2,5 kW
space needed: 1800 x 3800 x 2000 mm
weight: ca. 1800 kg
Pipe Hacksaw Startrite
Etbctnf
Saw blade diameter: 400 mm
Saw capacity: 150 mm round
Compatable with:
- Plastic pipe
- Pneumatic pipeclamp
Country of origin: Netherlands
Motor power: 2,2 kW
Machine weight: 750 kg
Documentation available.
Bp7bwegswj
pipe cutting and chamfering machine make GEORG FISCHER type RA 2
Fabr. # 041480504 Year of manufacture 1998
Technical data:
Working range Inch 1/8 - 2
Working range metric 6 - 63 mm
Wall thickness 2 - 5,5 mm
inner pipe diameter min. 7 mm / 2 mm
Saw blade diameter 63 / 68 mm
Saw blade speed 150 - 270 rpm.
Drive power 1600 W
Power supply 220 V, 50 Hz
Bhrmj2dknu
Dimensions L x W x H 750 x 300 x 300 mm
used, in good condition
Table length 900
Obrex
Table width 300
A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position....
Frame saw Meyer & Burger GS1 19-04-025
Delivery time: immediately
Number: 19-04-025
Machine data
Year of construction: approx. 1970
L x W x H: approx. 1700 x 800 x 1200 mm
Weight: approx. 1000 kg
Very good general condition
Tfzlhdgr
Cutting gate:
Width max. : 220 mm
Free length between the jaws: 350 mm
Gate stroke: 86-200 mm
Stroke adjustment in 20 steps from: 6mm
Number of reciprocations per minute (continuously adjustable): 5-120
Further accessories on reques...
Automatic Lengthstop system with upgrade to pushersystem for material like steel, aluminium, wood.
Cd73zhb8
Manual Length Stop Rotox LA 393
Length setting by hand wheel, digital measure display
Vi0quym
Adjustable working height
Movable and tilting material stop
Accuracy +/- 0,1 mm
Travel (mm): 3.500
Support width (mm): 400
Working height (mm): 800 - 1.000
Machine dimensions L x D x H (mm): 3.800 x 500 x 1.100
Weight (kg): 95
Manufacturer: mso Maschinen- und Schleifmittel A.G.
Circuit diagram no.: SB-1039
Blaxjgl9ra
Machine no.: 25380
Kasto bearing saw systems hacksaw SSZ 140/90 B including laser value 40,000 €
Kasto bearing saw systems
KASTOcenter
In KASTO sawing centers, computer-controlled storage and retrieval machines automatically move individual bars into an integrated CNC sawing machine and automatically store the remaining pieces. A warehouse computer keeps stocks up-to-date independently. KASTO offers this flexible machining center for the sawmill complete with bearing, saw, control and service from a single sourc...
Diamond saw Meyer & Burger TS3 19-04-024
Delivery time: immediately
Number: 19-04-024
Machine data
Year of construction: approx. 1970
L x W x H: approx. 1000 x 800 x 2000 mm
Weight: approx. 800 kg
Cutting disc diameter: 100-150 mm
Cutting disc bore: 20 mm
Speed: 4500/5000, 5600/6300 rpm
Good general condition
equipment
Bw3vxjkg
- torque wrench
- documentation
Further accessories on request
Price and further technical data on request