Blow Moulding Machine

Kautex KB 50/KB 15

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Tsdpeq Nmm Ejfx Adlsf Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: used, Tool holder shaft type:HSK-A 100 Todpfsg Nqlisx Adlef Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

Condition: used, Year of construction: 2000, grinding length 1600 mm grinding width 600 mm workpiece height 500 mm total power requirement 50 kW Tedpfx Adst Hxcbjlsf

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Todpfx Adetqfg Holof Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: used, functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Tsdpfx Ajr Hquhsdljf Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Brogtec METEOR High performance colloid mill - homogenizer ATEX Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Todpofi Tmcofx Adlsf

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, grooved feeding bush, screw with shearing and mixing element Tedpfx Aodm Aghodlof

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Todpjk N Iy Nofx Adlef Drive motor: 132 kW

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Tjdpfxetyyn Hs Adlof

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Todspdrpzopfx Adlof Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height 250mm Maximum 730mm