3D bin-picking vision system for robots

Keyence RB-1200

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Was used as spiral freezer to freeze over 3 tonnes per hour of fried McD chicken burgers. Fpsdpex Hbhcsfx Aanjp

Condition: good (used), Year of construction: 2014, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2014 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Fjdszc Dyrepfx Aanepp Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Fpodpoucgalsfx Aanep Complete with touch screen control Two pneumatic reject arms Fully stainless steel Belt dimensions 1750mm x 195mm In good working condition

Condition: refurbished (used), Technical data Metal base, Control cabinet, Control panel, Siemens brand, The operator can see all necessary information on the touch screen, Long service life, Can be synchronized with all packaging machines, works in line with carton packaging machines, with bag applicators and/or vertical packaging machine (VFFS), Product contact parts are made of stainless steel or food grade plastic, Fpjdpfxet Ibgre Aansp Available with 2, 4, 6 and 8 channels. Each channel is equipped with a backlash-free eccentric drive, Simple operation.

Condition: ready for operation (used), Year of construction: 2010, A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible. Fpodpfoy Ey Ufsx Aanjp

Condition: ready for operation (used), A VSB Verbufa for the positioning of minced meat, hamburgers, cookies, balls and sticks with high cycle output in packaging and packaging machines is available. Output: 110 portions/min, machine dimensions X/Y/Z: approx. 1700mm/950mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Fedpfxev Ifwle Aanspp

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Fodpfx Ajyvrvpjanepp Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: new, Year of construction: 2025, Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm; weight range: 5-1000g; accuracy: +/- 0.3-3g; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 1-phase; machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fpodpfxev Nm Rps Aanop

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm Fsdpoz Hmn Nsfx Aanepp • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Thom Multi-Line-Loader | Shuttle Conveyor (2 units) Manufacturer: Thom Metall- und Maschinenbau GmbH Model: Multi-Line-Loader Machine number: 72392-001-00 Year of manufacture: 2018 Power: 19.75 kW Fpedjy Rhygspfx Aansp Belt type: Modular plastic Conveyor details No. 1: Belt width: 250 mm Unit weight: approx. 630 kg Dimensions: 2800 × 800 × 1650 mm Conveyor details No. 2: Belt width: 650 mm Unit weight: 1360 kg Dimensions: 2650 × 1200 × 1250 mm Thom shuttle conveyors are high-quality process devices made of stainless steel, designed for use in the food industry. Their primary function is the dynamic distribution or accumulation of product flow on production lines. Thanks to the use of high-power drives (almost 20 kW), these systems are characterized by high crosswise movement dynamics, enabling precise control of product flow prior to packaging or freezing stages.