3 rolls hydraulic bending

KK-Industries CY3R-HHS 210-30/6.0

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Bsdpfx Acowntqxszolr Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Bedpfxjxdt Umo Aczelr Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Bledpfx Acetwliwezsr Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, functionality: fully functional, Year of construction: 2007, working width: 4,250 mm, type of crowning: CNC-controlled, overall weight: 16,000 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 3,000 mm, - Press beam operating hours: 9,874 h - Stroke: 600 mm - Force: 1,700 kN - Working length: 4,250 mm - 5-axis backgauge - CNC crowning - Hydraulic tool clamping (top/bottom) - Die adjustment for hemming Bodpfx Acjxcxy Sjzolr - CNC-controlled bending aid - Bendguard safety device - ACB angle measuring sensor

Condition: new, bending length: 1600sheet length: 1600upper roll diameter: 140sheet thickness: 6 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.580,-- Bljdped Ab Smsfx Aczjr - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Bsdpfx Acjuudrkjzslr Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul Bsdpscbq Nwjfx Aczolr >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: new, bending length: 3100sheet thickness: 4upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  Bledped Ab Nmefx Aczjr - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 1.650,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 4,300 h, Trumpf TruBend 5130 press brake (2007) This Trumpf TruBend 5130 bending machine was manufactured in 2007. It has a work order of 13,892 production hours. The Trubend is equipped with a Trumpf DA 65 TW control unit. This machine can work with a pressing force of up to 1200 kN. Trumpf TruBend 5130 press brake Manufacturer: Trumpf Type: Trubend 5130 Year of manufacture: 2007 Condition: used, good Operation hours: 36,940h Hydraulics running time: 22,490h Press beam running time: 4,264h Crafter running time: 242h Max. bending length 3230 mm Distance between the columns 2690 mm Max. pressing force 130T Distance between table mount 470 mm Max. stroke 445 mm Number of controlled axes 4x Stop fingers 8x Upper tool clamp hydraulic Lower tool clamp hydraulic Crafter CNC BendGuard Tasc 6000 control Bending aid front 1x Total connected load approx.: 24 kVA Weight approx. 11,000kg Space required: 2840 x 4060 x 1740 mm Note: Without tools Bledpfxexwmkbo Aczjr

Condition: new, sheet thickness: 8bending length: 2100upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Bodpfx Aced Ab Siezjlr Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!