Radial drilling machine

Kolb NK 20

Condition: excellent (used), mileage: 1,215 km, fuel type: diesel, color: grey, mast type: telescopic, Year of construction: 2016, operating hours: 66 h, General Information Year of manufacture: 2016 Purpose: Construction Drivetrain Drive: Wheel Functional Mast: Telescopic (4 sections) Mast length: 38.5 m Lifting capacity: 25,000 kg Superstructure brand: ZOOMLION QY25V51.5 25 TONS CRANE Condition Technical condition: Very good Cgjdsuu Dh Espfx Aa Nop Visual condition: Very good Financial Information Price: On request

Condition: new, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, number of slots in tool magazine: 30, controller manufacturer: Siemens, total height: 2,560 mm, total length: 2,350 mm, total width: 2,160 mm, overall weight: 4,300 kg, table length: 1,000 mm, table width: 550 mm, controller model: 828D + Shopmill, coolant supply: 20 bar, distance table center to spindle nose: 700 mm, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: SK 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 100 rpm, table load: 800 kg, tool diameter: 76 mm, tool length: 300 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Including equipment such as: Preparation for 4th & 5th axis; Robust roller guides in all axes; Spindle cooling system (oil cooling); Fast double-arm tool changer with preselection and vertical magazine with 30 tool stations; Hinged belt chip conveyor; Coolant through the spindle with 20 bar high-pressure pump; Air blast through the spindle; Coolant gun; Movable electronic handwheel. Upon request, we can offer this machine including a suitable rotary table for the 4th & 5th axis. Please indicate this in your inquiry! Cedpjdkh Tiofx Aa Nsgp

Condition: used, Year of construction: 1977, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Cgjdpeiz Tmkofx Aa Njp Ready for use .

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Cjdpfeg U Uv Rox Aa Negp Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: ready for operation (used), Year of construction: 1990, Böcker LH 710 with electro-hydraulic drive year of construction 1990 No.3216/2 Cedpfx Aaehh Swko Njgp nominal load 300kg dead weight 255kg lifting height 7100mm Overall height 2200mm

Year of construction: 1995, condition: ready for operation (used), A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible. Codpeu T Rgwefx Aa Nsgp

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Cgjdpfohgiuhox Aa Nsp Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Cedpfot Hw Uvox Aa Nsgp Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system Codpfjri Slmsx Aa Nsgp The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: excellent (used), mileage: 136,029 km, fuel type: diesel, color: red, lifting height: 37,400 mm, mast type: telescopic, Year of construction: 2016, operating hours: 7,578 h, = Additional Options and Accessories = - PTO = Further Information = General Information Year of manufacture: 2016 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Functional Cgodpjuxu Dtjfx Aa Njp Mast: Telescopic (4 sections) Mast length: 37.4 m Lifting capacity: 40,000 kg Superstructure brand: TEREX AC40 CE marking: yes Condition Technical condition: very good Visual condition: very good TEREX AC40 CRANE DRIVE 4X4X4 COUNTERWEIGHT 5.5 TONS CARRIER 136029 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TIRES 60% GOOD SIZE 445/95/R25 ADBLUE CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE HEATING 1 TIMBER SLEEPER 15 T. 1X WINCH MAX. LIFTING CAPACITY: 40,000 KG MIN / MAX BOOM LENGTH 9.5 M / 37.4 M MAX WORKING HEIGHT 37.4 METERS CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL