Tool taper

Komet HSK63

Condition: good (used), Internal article no.: 24020 Comet boring head Designation: ABS50 FK1 Hedpfxstr A Dis Addeng Mounting: HSK-A63 Diameter mounting D25.8mm Unscrewing range: D23mm

Year of construction: 2009, condition: used, Technical details: Hnedpfx Aswp I S Heddog tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Hsdov Hmdqspfx Addong Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter Hsdpfx Ajnwmh Seddsng * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Hjdpevw Sdqsfx Addeng Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 600 mm Hjdpfx Adexq Hf Ssdeng z-travel 500 mm table surface area 1000 x 560 mm spindle taper HSK 63 A spindle turning speed - stepless 20 - 16.000 U/min spindle power 15 kW max. torque on the spindle 9 Nm feeds x/y/z -stepless 1 - 30.000 mm/min rapid traverse 35 m/min feed power 8000 N ATC 30 Stationen control HEIDENHAIN, TNC 430 total power requirement 32 kVA weight of the machine ca. 7,2 t dimensions of machine L x W x H 2,75 x 2,30 x 2,95 m Accessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolant

Year of construction: 2023, operating hours: 154 h, condition: ready for operation (used), General Data Measurements width 1690 mm Measurements depth 2785 mm Measurements height 1725 mm Machine weight 4650 kg Control Unit Brand MAZATROL Model SMOOTH Ez Main Drive Number of axis 3 Movement X-Axis Movement 215 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 100 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement 605 mm Z-Axis Rapid Traverse 30 m/min Media Air pressure 0.5 to 1.0 MPa Hnsdpfjx D R Svox Addeg Additional Equipment Transformer for Europe (CE) Roller guide with spherical roller bearings SD memory card I/F + USB memory I/F 1 Set of control keys Foundation kit (steel plates) CE Marking (With noise filter) C-axis Positioning 0.0001° Increment 12-Position Turret Y-Axis Control Interface bar feeder This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, Z and C axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Application Types Turning

Year of construction: 2024, condition: new, weight max. in kg 300 kg dimensions 1200 x 900 x 1300 mm weight 125 kg Hnsdexcywrjpfx Addeg For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Approved for a maximum of 2 people, approved by the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: new, Year of construction: 2025, The PS-650 swivel by CORMAK is a versatile auxiliary device that is used in various production tasks. Its wide range of capabilities makes it suitable for use wherever workpieces need to be manipulated. The welding, painting and mechanical industries have come to appreciate the quality and rotary capabilities of our positioners. CORMAK positioners are the ideal solution wherever components or subassemblies need to be rotated, wound or coiled. The main features, functions and advantages of the welding positioner are: Functions: 1. Rotation direction switch: Allows control of the direction of rotation of the turntable disc. 2. Rotation direction switch: Allows the direction of rotation of the disc to be changed. 3. Infinitely adjustable disc speed: With this function, the disc speed can be adjusted to suit the specific job. 4. Compact, compact design: Robust construction ensures the durability and robustness of the machine. 5 Control pedal: Facilitates control of the positioner's operation. 6. thermal fuse: Provides additional safety during operation. 7. Brush motor: A brush motor is a type of DC electric motor that can be effective in a variety of applications. 8. Disc tilt range 0 - 90°: The ability to tilt the turntable disc from 0 to 90 degrees is useful for welding in different positions. 9. Centring bracket mounting capability: Allows additional centring of workpieces. Advantages: Hjdpjuc Tdqjfx Addong 1. higher productivity: The positioner helps increase productivity in assembly and welding processes. 2. Reduced production costs: Automating or facilitating the rotation of parts can help reduce production costs. 3. Repeatability of completed joints: The device helps to maintain consistency and quality of joints. 4. Flexibility in use: The ability to adjust the speed and direction of rotation makes the device flexible to adapt to different tasks. 5. Improved working conditions for the welder: Allows the welder to work more comfortably and in more comfortable positions when welding. Machine characteristics: direction of rotation switch direction of rotation switch has limit switches high torque durable brass bush guaranteeing 100% weight transfer to the material to be welded Infinitely adjustable disc speed compact design control pedal remote control on cable thermal fuse Stable speed regulation Disk inclination range 0 - 90°, possibility to mount the self-centring holder Technical data: Power supply 400 [V]. Motor power 300 [W]. Horizontal load capacity 400 [kg]. Vertical load capacity 200 [kg]. Table diameter 650 [mm]. Workpiece diameter 693 [mm] Screed inclination range 0° ~ +90° Speed control range 0.2 -1.8 [rpm] Continuous speed control Continuous rotation adjustment Overall length 850 [mm] Overall width 700 [mm] Overall height 680 [mm] Weight 122 [kg]. CORMAK's PS-650 positioner is a valuable tool in an industry that requires the rotation and positioning of workpieces, especially during welding processes. It helps to increase productivity, reduce costs and improve the quality of work. *three-jaw chuck not included in the kit

Condition: excellent (used), Year of construction: 1998, operating hours: 148,086 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain TNC 430 (handles modern trochoidal paths without issues) Year of manufacture: 1998 Basic dimensions (L/W/H): 2.5 x 2.1 x 2.7 m X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Highlights: Tool measurement / workpiece probe / LED machine lighting / HSK63 / V2A stainless steel interior cladding / ICS (internal coolant supply) / chip conveyor / external air with cold air nozzle via M-function / status LED signal lamp Hnodpfx Aexz A Nneddog Spindle Data Spindle mount: HSK A 63 (12,000 rpm) Tool magazine: 30 positions Feeds and Speeds Feed rate range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program runtime: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net, plus VAT.