Bolster plate - Plate field

Krups AP 4000x2000x460

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Codpoh Auahefx Aflohf Weight: approx 3 T

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Chsdpofg E Hpsfx Afljf reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Cedpfswdub Dox Aflshf Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Csdpfx Afeu Ey Dlelshf Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5,8t Load capacity 60t 6 pieces available partly with stairs Csdpjg Sbbxjfx Afljhf

Condition: used, plate width 2510 mm plate depth 5135 mm Chsdpfxshpvavs Aflsf plate height 345 mm weight ca. 10 t required space 2,5 x 5,1 x 0,38 m

Year of construction: 1980, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model 426 Chsdpjwn Nutefx Aflof Main Drive Spindle speed range 2500 Number of axis 4 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Table Outer length 1800 mm Outer width 1800 mm Table load 12000 kg This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2009, condition: reconditioned (used), machine/vehicle number: FARO-PT08, Faro Platinum Arm in top conditionArm 7 axis, length 8ft (appx. 2,4m) Accuracy 30/43µm Last calibration 2012 incl. very new Aberlink 3D software (free updates) Windows 10 HP notebook (used) on demand Inca Premium software (+ € 4.000,--) or other application (Polywork, PcDmis, MComos.) On demand we can deliver a granit plate with 1500x1000mm. Chsdolwktpjpfx Aflof Softwaretraining possible

Condition: new, axle configuration: 2 axles, total length: 5,250 mm, total width: 2,300 mm, total height: 1,000 mm, color: red, Year of construction: 2025, Carrying capacity: 24.000 kg Tyre size on axle 1: 24R20.5 Chsdpfjv R I Nvox Aflsf Tyre size on axle 2: 24R20.5 Tyre size on axle rear: 24R20.5

Condition: new, FACTORY NEW ROTARY TABLES Working position: vertical - horizontal Applications: positioning – stepless rotation // interpolation Rotary table clamping surface Ø: 500 / 600 / 800 / 1,000 / 1,200 mm - Clamping surface can also be square - Csdpfx Afem Tvz Doljhf Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration with machines featuring HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered /// Nur Anfragen aus Deutschland werden bearbeitet