Four-sided planer

Leadermac Compact LMC-523C

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Ibjdpfx Amoympx Ue Dsc

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Air blast for both units. Total weight: 2500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, machine is regularly serviced. Ibodpfx Amjgq U R Ns Doc Available immediately.

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine - 4 drilling units top - 4 drilling units rear Ijdpfx Amsu Shx Do Djbc - Right and left

Condition: used, Weinig Unimat 23 Technical data Iedencc Igjpfx Am Djbc Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) Iodpfx Aexz Hh Ujm Dsbc ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, WORKING DIMENSIONS 450x260 mm SURFACE PLANER kW 11 THICKNESS PLANER kW 15 SPINDLE MOULDER RIGHT kW 9.2 Ibedpfow E Ev Isx Am Doc SPINDLE MOULDER LEFT kW 11 FEED kW 5.5 TERSA CUTTERBLOCKS SOUNDPROOF CABIN CE

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer Ijdpfx Aeyapi Hem Dobc If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Isdjy N D A Uspfx Am Dsbc Wood thickness: 20–50 mm Press length: 6100 mm Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute

Condition: used, Year of construction: 2006, x-travel 320 mm y-travel 240 mm Iedpswp S Sdefx Am Dobc z-travel 300 mm total power requirement 3 kW weight of the machine ca. 1 t

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Iedpeiffpxsfx Am Djbc Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg