Panel Return Systems

LIGMATECH ZHR 05/R/105

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Kedpfouxnyuex Abvelp (Inquiries will only be answered with your address and telephone number).

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Klsdpfxswcyd Is Abvjp Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Kjdpfxewuz E Ro Abvjlp Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package Kledet Hxxpepfx Abvep max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16 Kedpfx Aowuz N Nobvjlp

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake Kljdjw H Rq Hjpfx Abvop - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: good (used), Year of construction: 2009, Brief Description of Basic Equipment ·      Console table ·      Automatic console positioning ·      Three-stage clamping element ·      Laser positioning aid for vacuum clamps ·      Vacuum clamps Main spindle 15 kW C-axis with aggregate interface Interface for Flex5 aggregate 30-position chain tool changer Tool holder HSKF 63 Drilling head with 13 spindles WoodWop package for CAD/CAM PC integration Rack and pinion drive for X and Y axis Ball screw for Z axis Z-axis travel: 600 mm Travel speeds: Vector speed: 113 m/min X and Y axis: 80 m/min Z axis: 30 m/min Free-standing electric cabinet. Homag control system Homag Homatic CNC System NC 83 with PLC control Remote diagnostics / telephone modem Technical Data Max. workpiece length: 4000 mm (all aggregates individually), max. 1375 mm with pendulum operation Tool diameter: 25 mm Single: 4175 mm / pendulum: 1550 mm Workpiece width (all aggregates): front 1150 mm, rear 1400 mm Workpiece thickness: 40 mm Milling operation, tool diameter 25 mm: front 1220* mm, rear 1550 mm *Workpiece thickness 40 mm Console table K Console length: 1340 mm Side stop rails Vacuum clamps Max. workpiece thickness: 300 mm with standard clamp max. 120 mm with mechanical clamping elements / clamping templates (customer-supplied) up to 80 mm with standard clamp Working height: 960 mm (underside of workpiece) PM basic equipment Automatic console positioning Three-stage clamping element Main spindle 15 kW (12 kW in S1 mode) Frequency inverter Spindle with hybrid bearings C-axis with aggregate interface Interface for Flex5 aggregate Vertical high-speed spindles Pneumatic lowerable loading stroke Two-stage clamping element for PM console Clamping device for post edge Three-stage clamping element for PM console Klsdpfx Aboyb Ndgjvjp Saw unit D= 280 mm Drilling/milling aggregate, 4-spindle for tool changer Lock case aggregate 2 Immediately available All information supplied without liability. Further technical data upon request. Individual tools may also be purchased at additional cost. The tools shown are NOT included in the base price!

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Kledpfx Ajx Swf Usbvop Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: Kodpfx Absxdl Raovslp - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 23.5 kW (31.95 HP), travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, total length: 6,580 mm, total width: 4,560 mm, overall weight: 6,500 kg, for the production of furniture components made of wood or wood-based materials. Working area X 3250 Y 2025 Z 150 Alternate field processing Kjdpfx Aboyufd Aevelp Pendulum operation Chip conveyor 3250 mm, 1 x right, discharge right Chip conveyor integrated in the machine frame. Discharge direction: right HSK 63 lock case HIGH Performance, 1 x right, 2 spindles For automatic tool change in the main spindle. HSK63 milling unit, 4 spindles, cross-head Flex-5 saw, milling, and drilling unit for tool changer -for automatic tool change in the main spindle -for sawing, milling, or drilling operations