Hydraulic guillotine shear, sheet metal shear, sheet metal guillotine shear
LVD HST-C 31 / 6

Fixed price plus VAT

€13,900

Condition

Used

Location

Hessisch Lichtenau Germany

Hydraulic guillotine shear, sheet metal shear, sheet metal guillotine shear LVD HST-C 31 / 6

Machine data

Machine type:: Hydraulic guillotine shear, sheet metal shear, sheet metal guillotine shear

Manufacturer:: LVD

Model:: HST-C 31 / 6

Condition:: used

Price & Location

Fixed price plus VAT

€13,900

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A16287568

Reference number:: 60654

Update:: 15.01.2026

Description

Hydraulic Plate Shear LVD Type HST-C 31 / 6
Machine No. 21348 Year of manufacture: 1994
Cutting length: 3,100 mm
Cutting thickness: 6.35 mm
Backgauge: 770 mm
Working height: 950 mm
Hydraulic sheet hold-downs: 17 units
Hydraulic tank capacity: 150 liters
Motor power: 7.5 kW
Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp.
- Motorized backgauge with digital actual position display ELGO
- Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only
- Sheet lifting device below the backgauge with pneumatic lifting cylinder
- Continuously adjustable blade gap from 0.1 mm via handwheel with analog display
- Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable
- Left side angle stop 1,500 mm
- 2 table extensions as sheet supports
Ncjdpstvb Iusfx Agpju
- Electric foot switch
- Comprehensive operating manual
Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm
Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm
Weight: 5.5 tons
Good condition
Very good cutting results, including with thin sheet metal

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

595 listings online

Call

Send inquiry

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Eisenberg (Pfalz)

1,012 km

Plate shear
RAS GmbH86.33

Call

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Nodpfx Agsv Tk Exepjcu Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

See details

Listing

Essenbach

1,307 km

Press brake
AMADA PROMECAMHFP NT 100-3

€59,999

ONO plus VAT

Call

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Ncedpfx Ajtwliwogpsu Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

See details

Listing

LEVIBRETON ONE surface sanding machine Breton LEVIBRETON ONE

Kiel

878 km

LEVIBRETON ONE surface sanding machine
BretonLEVIBRETON ONE

€21,250

ONO plus VAT

Call

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine Nedpfxsrpi E Aj Agpjcu The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool.

See details

Listing

High speed radial drilling machine DONAU DR30

Wiefelstede

785 km

High speed radial drilling machine
DONAUDR30

€4,950

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Nodpfjirax Ujx Agpocu -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

See details

Listing

Planer Moulder Reignmac Comewa MB 4-4023

Sidzina

1,686 km

Planer Moulder
Reignmac ComewaMB 4-4023

Call

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Ncsdpfx Aohlp D Nogpeu - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

See details

Listing

Mozé-sur-Louet

915 km

Press brake
LVDPPBL 200/40

Call

Listing

Kirchen (Sieg)

910 km

Machining center
HAASEC-1600

Call

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Nodpfx Agovgmr Iopocu Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

See details

Listing

Hydraulic press Hans Schoen NHN 250 75 (250 Ton)

Struer

758 km

Hydraulic press
Hans SchoenNHN 250 75 (250 Ton)

€22,000

EXW Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration. Ncjdory Trpopfx Agpju

See details

Listing

CNC milling machine Bridgeport Interact 4

Soerendonk

750 km

CNC milling machine
BridgeportInteract 4

€2,000

Fixed price plus VAT

Call

Listing

Articulated arm grinding machine MTM GSM 110

Mainbernheim

1,116 km

Articulated arm grinding machine
MTMGSM 110

€27,460

ONO plus VAT

Call

Year of construction: 2025, condition: new, Standard version with column Motorized height adjustment 700 mm Ncodogn Tzlopfx Agpsu Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and mounting template Grinding tools available as an option Request more information

See details

Advertise here