Saddle stitcher

Müller Martini Prima

Year of construction: 1996, condition: used, machine/vehicle number: 9104662, 6 Automatic Feeders 1 Cover Folder Feeder Lsdpfxsiyp Elo Ah Uoak Three Knife Trimmer MM - Practico Stacker

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) Lajdpfsh Nrh Usx Ah Uok ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,430 h, functionality: fully functional, machine/vehicle number: MMZO 531 524, product height (max.): 5 mm, product length (max.): 480 mm, product width (max.): 320 mm, production capacity: 14,000 unit/h, The electronics and EPS were renewed in 2018! The machine is equipped as follows: - 1 x UG feeder - 9 x rotary feeders - 1 x card gluer TECHNICAL DETAILS Format (maximum): 480 x 320 mm Format (minimum): 153 x 108 mm Product thickness: 3 – 5 mm Performance Maximum mechanical speed: 14,000 cycles/h Ledpfoxn R U Eox Ah Uoak Production speed Post-fold: max. 14,000 units/h Pre-fold: max. 9,000 units/h Suction opening: max. 12,000 units/h MACHINE DETAILS Operating hours: 19,430 h Note: The positions 6 & 22 indicated in the legend are no longer for sale. The legend can be found in the attached machine layout.

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Lsdpfsmn Sk Njx Ah Ueak Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button Laodpfx Asn Aw Ucsh Ujk – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 Laodpfxovxf Sqs Ah Uek - Excluding pump(s) Stitching unit Müller Martini 390 - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit Lasdpfsizi Ivsx Ah Uok • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Lasdpotzc Iqofx Ah Uok Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1997, condition: good (used), Machine number: 91.05666 Laodjk D Almjpfx Ah Uek Built in: 1997 Size: max 480 x 320 mm Size untrimmed: max 480 x 320 mm, min 153 x 108 mm Size trimmed: max 475 x 300 mm, min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1529 stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives • Doppelnutzeneinrichtung • Betriebsstunden: 34.088h

Year of construction: 2005, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Lasdpfx Ahsl I Eype Usk Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · 1 Standard accessories · 1 Standard tools Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Lasdpfx Aherx S Iwe Usk Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Laedpjd N D Ntjfx Ah Uok Size max: 480 x 320 mm Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Ledpowcqygjfx Ah Usak Format: 320 x 480 mm Equipment: Equipment Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Condition: used, Year of construction: 1991, machine/vehicle number: 6172025, Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3Baujahr / Year 1991 - Serial-No. 6172025 Ljdjn Aw Ugspfx Ah Uoak Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1996, The Mueller Martini Prima is a robust and efficient saddle stitcher designed for high-quality binding tasks. Manufactured in 1996, this machine is currently in production and located in Germany. It features a feeder system with four 370 feeders and one cover feeder with a capacity of 1529. The Prima is equipped with a stitching unit that includes two stitching heads, ensuring precise and reliable stitching. It also features a three-knife trimmer, type Mueller Martini 360, for accurate trimming of bound materials. The delivery system, type Mueller Martini CS 20, allows for versatile delivery directions, both left and right. With a runtime of 25,000 hours, the Prima is a durable and dependable choice for high-volume binding tasks. It can handle materials with a size of 480 x 320 mm. Optional features such as a center-cut device, additional stitching heads, and compressors are available upon request, enhancing its versatility and functionality. Format: 480 x 320 mm Equipment: Feeder Number of feeder: 4x 370 Cover feeder: 1x 1529 Stitching unit Type: Mueller Matini Prima 2x stitching heads Three knife trimmer Type: Mueller Martini 360 Delivery Type: Muller Martini CS 20 Serial number: 97.01006 Delivery direction: Left & right Optional (available on request) Center-cut device Additional stitching heads Lajdpfxswcqymo Ah Ujk Compressors Runtime 25.000 h