Saddle stitcher

MÜLLER MARTINI Prima

Year of construction: 1996, condition: used, machine/vehicle number: 9104662, 6 Automatic Feeders Iisdpoiyp Elsfx Ah Uek 1 Cover Folder Feeder Three Knife Trimmer MM - Practico Stacker

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Isdeh Nrh Uepfx Ah Ueik Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,430 h, functionality: fully functional, machine/vehicle number: MMZO 531 524, product height (max.): 5 mm, product length (max.): 480 mm, product width (max.): 320 mm, production capacity: 14,000 unit/h, The electronics and EPS were renewed in 2018! The machine is equipped as follows: - 1 x UG feeder - 9 x rotary feeders - 1 x card gluer TECHNICAL DETAILS Iiedpfx Ajxn R U Eeh Ujk Format (maximum): 480 x 320 mm Format (minimum): 153 x 108 mm Product thickness: 3 – 5 mm Performance Maximum mechanical speed: 14,000 cycles/h Production speed Post-fold: max. 14,000 units/h Pre-fold: max. 9,000 units/h Suction opening: max. 12,000 units/h MACHINE DETAILS Operating hours: 19,430 h Note: The positions 6 & 22 indicated in the legend are no longer for sale. The legend can be found in the attached machine layout.

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Iijdpfxemn Sk No Ah Usk Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Speed max 12.000 c/h Equipment gathering machine • 18 stations • 18 feeders 3661-210 SF intermediate elements Iodpjd R Ecpofx Ah Ujik • spiral race away • jogging element perfect binder • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 - Excluding pump(s) Iodsvxf Sqopfx Ah Uoik Stitching unit Müller Martini 390 - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder Iisdpfxeizi Ivj Ah Ujk • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Year of construction: 2005, Saddle stitcher Heidelberg Stitchmaster ST 400 Year 2005 Operation / Control - Colour monitor Feeders - Number of chain stations: 9 - Horizontal signature feeders: 2 x TAL 400 - Vertical signature feeders: 6 x TAS 400 - Cover feeder: UFA 400 - Excluding pump(s) Stitching unit Heidelberg Stitchmaster ST 400 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Iijdpeh E Ewdjfx Ah Usk Trimmer Heidelberg TR 400 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left

Year of construction: 2005, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Ijdpfsl I Eypox Ah Usik Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · 1 Standard accessories · 1 Standard tools Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm Iijdpjd N D Ntefx Ah Ujk min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 2 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 Ijdjh Ezmiepfx Ah Ujik - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Year of construction: 1997, condition: ready for operation (used), 25276F Müller Martini Prima Saddle stitchers with feeder and trimmer Machine number 91.06606 Built in 1997 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Iisdpfx Ajd Nvtpjh Uok Number of heads max 6 Equipment gathering chain & feeder • 9 station gathering track & chain • 8 feeders 370 • 1 cover folder feeder 1529 stitching unit • semko • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Format: 320 x 480 mm Equipment: Equipment Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Iijdpfxjwcqygj Ah Usk Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Iijdpfxjch Hcao Ah Ujk Height adjustable also available with other lengths Inkjet base

Condition: used, Year of construction: 1996, The Mueller Martini Prima is a robust and efficient saddle stitcher designed for high-quality binding tasks. Manufactured in 1996, this machine is currently in production and located in Germany. It features a feeder system with four 370 feeders and one cover feeder with a capacity of 1529. The Prima is equipped with a stitching unit that includes two stitching heads, ensuring precise and reliable stitching. It also features a three-knife trimmer, type Mueller Martini 360, for accurate trimming of bound materials. The delivery system, type Mueller Martini CS 20, allows for versatile delivery directions, both left and right. With a runtime of 25,000 hours, the Prima is a durable and dependable choice for high-volume binding tasks. It can handle materials with a size of 480 x 320 mm. Optional features such as a center-cut device, additional stitching heads, and compressors are available upon request, enhancing its versatility and functionality. Format: 480 x 320 mm Equipment: Feeder Number of feeder: 4x 370 Cover feeder: 1x 1529 Stitching unit Type: Mueller Matini Prima Isdpfowcqymex Ah Uoik 2x stitching heads Three knife trimmer Type: Mueller Martini 360 Delivery Type: Muller Martini CS 20 Serial number: 97.01006 Delivery direction: Left & right Optional (available on request) Center-cut device Additional stitching heads Compressors Runtime 25.000 h