Face drivers ( 28076 )

Durchmesser 250 mm

Condition: good (used), Heavy-duty casters, heavy-duty wheel, tire, wheel, swivel caster -Load capacity: 1,000 kg -steerable -Brake -Ball bearing Gedpfx Ascgqc Een Ioug -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 4x wheels available -Price: per piece -Weight: 10 kg/piece

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25. Godpsfv Aq Rjfx An Isug

Condition: good (used), Heavy-duty casters, heavy-duty wheel, tires -Load capacity: 1,000 kg -Ball bearing -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 7x wheels available -Price: per piece -Weight: 7 kg/piece Gjdjcgqc Hopfx An Ieug

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm Gjdpjduac Ajfx An Ieug

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Gjdpfxswu Du Ie An Isug Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg Guodpfx Anedu Ud As Ieg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Gusdpfx Ajdvdvvon Isg -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Guedpfx Anszbc Hhs Ijg Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Three-jaw chuck, three-jaw lathe chuck Gedpfxodz U Sus An Ijug -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Gjdodz U Swepfx An Isug -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Weight: 22 kg

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Gujdpev Tctuefx An Ieg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 Guodpfxed It Ifo An Iog -Recess: Ø 199 mm -Weight: 36.5 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws Gsdpfx Aneckuz Se Isug -Mouth size: Ø 250 mm -Recess diameter: 205 mm -Bolt circle: 226 mm -Weight: 22 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. Guodpfetpu Szjx An Isg - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: used, Three-jaw chuck, three-jaw lathe chuck Guodpfx Ansdrwl Io Ieg -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm -Passage: Ø 76 mm -Weight: 26 kg