Pneumatic press for aluminum profiles

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 17,600 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 5,000 W Steel sheet thickness: max. 20 mm Stainless steel sheet thickness: max. 15 mm Aluminum sheet thickness: max. 10 mm Cutting speed: max. 60/85 m/min Accuracy: ± 0.1 mm Dedpfx Ajz Hxu Uepbjcn Table dimensions: 3,000 × 1,500 × 115 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 9,300 x 4,600 x 2,000 mm Total weight: 13,140 kg Operating hours Beam on: approx. 17,600 h Laser on: approx. 45,500 h

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces Dsdjrbk Tfopfx Apbecn • Left and right profile support arms are available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Dcodpfxoz H Rype Apbsn Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Total weight: 8,150 kg Operating hours: 5,125 h EQUIPMENT Full cabin Heater

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fork length: 1,000 mm, empty load weight: 3,589 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,805 mm Overall height: 2,460 mm Fork carriage: FEM 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Standard (2W380) Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 2,150 x 1,100 x 2,460 mm Total weight: 3,589 kg Battery voltage: 48 V Dcodpfx Apjz H Rvqsbjn Battery capacity: 690 Ah Battery year of manufacture: 2006 Charger: Three-phase, 48 V, 80 A (not tested) Front tires: Superelastic, 200/50-10 Rear tires: Superelastic, 18 × 7-8 Front tire condition: 70% Rear tire condition: 70% Operating hours: 145 h EQUIPMENT 3rd valve Impulse control Side shifter

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Dcjdpol Nbqcsfx Apbsn mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,933 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, mast type: duplex, fork length: 1,150 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,100 mm Free lift: 1,500 mm Overall height: 2,050 mm Fork length: 1,150 mm Fork carriage: FEM 2A MACHINE DETAILS Mast: Duplex, 2F310 Drive: Electric Dsdjz H Rutjpfx Apbecn Front tires: Superelastic, 18x7-8 Rear tires: Superelastic, 15x4.5-8 Condition of front tires: 70% Condition of rear tires: 10% Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2019 Charger: 48 V, not tested Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,070 x 2,050 mm Weight: 3,168 kg Operating hours: 10,933 h EQUIPMENT 3rd valve Work light, front Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,543 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fork length: 1,350 mm, empty load weight: 6,170 kg, TECHNICAL DETAILS Dodoz H Rkzjpfx Apbjcn Load capacity: 4,000 kg Lifting height: 4,000 mm Overall height: 2,750 mm Fork length: 1,350 mm Fork carriage: FEM 3A MACHINE DETAILS Mast: Standard (2W400) Drive type: Internal combustion engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: GM Engine model: Vortec V6 Engine: 4-cylinder internal combustion engine Front tires: Superelastic 8.25 - 15 Front tire condition: 80% Rear tires: Superelastic 28 x 9 - 15 Rear tire condition: 80% Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,400 x 2,750 mm Weight: 6,170 kg Operating hours: 12,543 h EQUIPMENT 3rd valve 4th valve Front work lights Rear work lights Windshield Half cab Fork extension Push forks Side shifter

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Dsdpfet Tqy Esx Apbocn Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,555 h, load capacity: 3,000 kg, lifting height: 3,300 mm, construction height: 2,270 mm, overall weight: 5,507 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,300 mm Overall height: 2,270 mm Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 500 Ah (Li-Ion, year of manufacture: 2021) Charger: 80 V - Li-Ion Weight: 5,507 kg Operating hours: 10,555 h EQUIPMENT 3rd valve 4th valve Rear work light Dsdpoz H Rhaofx Apbjcn Front work light Heater Full cabin Side shifter

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Dsdpfjz D Evaex Apbocn Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Dcsdpeff Apiofx Apbsn stroke 20 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Dcjdpfsz Ahybox Apbsn Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Dsdpfx Aoz Ahx Djpbocn Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: good (used), Year of construction: 1999, Pneumatic press, manufacturer: SCHMIDT, type: ZHS-2/22, year of manufacture: 1999. Two-hand operation. Dcsdeiduvcopfx Apben UVV certification valid until 2023.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Dcsdpfsz Ahxqox Apben Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens