CHEESE PREPRESS MKT-A

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets Laodpfx Aez Aplxsnxeg External reference: Demo - Lot 5

Condition: used, Yamato 714 Multihead Weigher Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments. Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables. The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation. ----- Lodpfsxdfa Iox Anxoag Specifications – Yamato 714 Weighing Heads - 14 heads Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible Speed - Up to 90 weighings per minute (product dependent) Chute Type - Flat chutes (ideal for frozen/hard products); angled chutes available Controller - Optional upgrade to RCU810A (color touchscreen) Build Material - Fully stainless steel, rigidized/dimple-plated finish Condition - Fully serviced and reconditioned – ready to run Applications - Frozen products, meat, seafood, hard candy, root vegetables, and more Product Size - Handles medium to large items (depending on setup) Highlights - Durable rigidized finish minimizes product sticking - Optional RCU810A controller for intuitive operation - Ideal for harsh environments (cold rooms, frozen packaging lines) - Alternative units available for soft/fresh produce (angled chutes) - In stock now – fast delivery possible! ----- 📦 Available Immediately 📍 Inspected and ready at our facility 📞 Contact us for pricing, viewing, or more details!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Ljdpfjz Apllex Anxeag Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Laodpfxjzzlc Ro Anxsg Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Lsdpfx Anoyln D Texeag

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Laedpfxszzk Rmo Anxog Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Lajdozzkwgopfx Anxeg Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. Lajdpfxov Tl D Ne Anxjg PLC SIEMENS-7

Condition: ready for operation (used), functionality: fully functional, total width: 28,500 mm, shelf height: 4,500 mm, carrying capacity per cantilever arm: 1,000 kg, distance between stands: 1,500 mm, load capacity per stand: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! The sale includes the entire shelving system. TECHNICAL DETAILS Number of uprights: 19 Number of arms: 38 Total load capacity per upright: 2,000 kg Load capacity per arm: 1,000 kg Arm length: 1,250 mm Upright height: 4,500 mm Base length: 1,200 mm Distance between uprights: 1,500 mm Lasdpfx Ajzzda Uonxog

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Laodjzzbfbspfx Anxeg Arbor saw blade diameter: 85 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Operating hours: 926 h EQUIPMENT CE marking

Condition: good (used), H.Biaugeaud A404 HB Cheese grater Laodevcdl Rjpfx Anxsg Stainless, previously used for grating cheese, two grating attachments, mobile, 3Ph

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lodjzzbdwepfx Anxjag Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total width: 5,440 mm, total height: 2,000 mm, total length: 1,700 mm, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Voltage: 380 V Current draw: 85 A Fuse rating: 100 A Power: 38 kW Dimensions (L x W x H): 1,700 x 5,440 x 2,000 mm Shipping packages: 1 unit EQUIPMENT Documentation CE marking Lajdpfozzbc Tjx Anxjg

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  - Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   - Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  - Cold Water Tank | 2.500L   - 3x Isobaric Fermentation tanks | INOX | 2.500L | 2020  Laodpfxety Ddre Anxeg - 3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 1.000l | 2014  - Brite tank | INDUSTRIAS CESPEDES | 2017   - Grinding mill  - Water tank | 1.000L   - Compressor   - Helicoidal pump   - Volumetric pump - Manual atmospheric filler - Steam generator

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Laedpfx Anozzbc Hsxog Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking