Set of feed roller intermediate rings WEINIG

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Lhjdshlp D Njpfx Ah Uer - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment Lhodpfsrigxyox Ah Ujr WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Lhsdpfx Asw Nbacjh Uer Input length: 150 – 700 mm Final length: max. 6,100 mm

Condition: new, Technical data: Lhjdpfxov S Uz Ie Ah Usr Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm Lhedpfx Ahoin Nrgo Uor planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: new, Holzkraft minimax si 400es 32 sliding table saw 5504754 In heavy-duty professional design with scoring unit and format sliding carriage made of anodized aluminum. Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guide tracks Lhsdpfx Ahekkrm Rj Ujr Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment option UP version: swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and weights Weight (net) approx. 715kg Suction connection Suction port diameter 120mm Suction port diameter saw blade guard 80mm Installation information Transport width990mm Machine body length 1900mm Machine body width/depth 885mm Required space length 7180mm Space requirement width/depth 4860mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given to the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power scoring motor 0,55kW Power drive motor 7,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table Length of sliding table 3200mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 940mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 1270mm Max. Trimming width left of saw blade 3260mm Trimming length 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°136,5mm Max. cutting height Cutting height 45°97mm Explanation max. cutting height Independent of scoring saw blade diameter 400mm Explanation Diameter of saw blade Independent of scoring unit Speed of saw blade 4000min¯¹ Scoring unit Diameter of scoring saw blade 120mm Speed of scoring saw blade 9200min¯¹ Holzkraft dealer - accessories available on request!

Condition: excellent (used), CATALOGUE NUMBER: 6651 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 4 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm, 4 kW 3) Left vertical: 120 mm, 4 kW 4) Top horizontal: 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 top feed-in rollers, toothed, including 2 double rollers - 1 top feed-out roller, smooth rubber - Lower feed-out rubber roller - Pneumatically pressed rollers - Feed through Cardan shafts - Feed motor: 1.1 kW - Lifting motor: 0.37 kW Lhedpfx Aoh Up Ipjh Usr - Electric thickness adjustment - Infeed table length: 1980 mm - Side pressure unit - Stepless feed speed adjustment: 8–16 m/min - Central lubrication system - Extraction port diameter: 5 x 140 mm - Fully enclosed in a cabinet - Dimensions (L/W/H): 3400 x 1500 x 1700 mm - Weight: approx. 1670 kg Net price: 39,900 PLN Net price: 9,500 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Lhsdpfjwwl Nljx Ah Uer Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Wood finger jointing line Grecon Profijoint Lhsdpfjw Ilrysx Ah Uer Grecon Profijoint Material length at infeed: 150-700 mm Material width: 40-150 mm Wood thickness: 18-50 mm Single-end tenoning machine Possibility of line milling Milling spindle power: 15 kW Power of the chipping/scoring spindle: 11 kW CE certificate

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Lsdpoumxqrofx Ah Ushr Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate