Tool retainer

SK 40

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Dcedpfsznk U Esx Ag Dsk Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Dodsw S Efzjpfx Ag Djck Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), 13 tool holders, Tribos type SK40 In very good condition Sizes: 1 piece 8mm 2 pieces 10mm 3 pieces 12mm 1 piece 14mm Dcedpfx Agezkp S Io Djk 4 pieces 16mm 2 pieces 20mm

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer: Bahmüller, thread cutting chuck with keyless chuck -Type: 18.6012 - Bahmüller SK40x36 A 125 -Chuck: Albrecht 1/8-5/8" / 3-16 mm Dsdpfexdxb Eex Ag Djck -Dimensions: Ø 63 x 350 mm -Weight: 4.4 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Dedpfx Aev Ipvxjg Dsck

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: WMW Smalcalda, milling chuck SK40 5 pieces -Type: SK 40/B12 40908 3 pieces -Type: SK 40/B18 41076 2 pieces -Versions: see photos -Price/Delivery: complete -Transport dimensions: 340/180/H70 mm Dcjdpfjubfxkox Ag Djk -Total weight: 6.6 kg

Condition: used, Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK2 M16 -Type: 40x2 Dsdpfx Agorqin Ae Dsck -Dimension: 60/55/H178 mm -Weight: 0.9 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump Djdpfxjy S A Rio Ag Djck - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: used, Three-jaw chuck, three-jaw lathe chuck Dcjdjg Td Eropfx Ag Dsk -Manufacturer: FD, three-jaw chuck mount SK40 -Chuck size: Ø 85 mm -Passage: Ø 16 mm -Weight: 2.3 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 Dsdpfxeg U A I Hs Ag Djck -Dimensions: 780/420 / H300 mm -Weight: 66 kg

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Dcjdpfx Agsx D Huaj Dsk Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction Dsdeu S Tclepfx Ag Deck -Milling adapters: intermediate sleeves, 6 pieces -Type: SK40 MK4 5 pieces / SK40 MK3 1 piece -Price/Delivery: complete -Total transport dimensions: 190/135/H225 mm -Weight: 7.8 kg/total

Condition: good (used), tool holder, milling holder, milling tool Dsdec Il Ehopfx Ag Dock -7x shots: SK40 -Adapter -Mounting: SK40 -Holder tool: MK4 -Drill chucks, face chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 9.4 kg

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm Dcodpfx Asq Ui Hqeg Dek B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Tool holder, milling holder, milling tool -11x recordings: SK40 -Adapter Dcjdpjc Il Ekofx Ag Dsk -Take: SK40 -Tool holder: MK2 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9.3 kg