MAESTRO Glazing Bead Saw

M.S.K. OMRM 105

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Bodpfx Aoxnlgcjl Ielg

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - double miter Bodpfx Ashzuu Nol Ielg - 4 pneumatic clamps - Hydrocheck system - mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - blowgun - protective cap - documentation - 400V

Condition: reconditioned (used), Year of construction: 2005, URBAN Corner Cleaning Machine Type: SV430; Year 2005 Used, in very good condition, technically overhauled Bljdpfx Aljyl Hu Dj Ijg Top machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife Bottom machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Bodpfxewu Ez Ne Al Ijlg

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC Bledpfx Aljt Uucae Isg M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm Blsdpshfufgjfx Al Ijg -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm Bledoxbh Hfspfx Al Iog table height / mm

Condition: used, Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, Digital screen printing machine with hot foiling unit. Year of installation: 2019. Minimum print format: 29x42 cm, maximum: 75x120 cm. In excellent condition. Bljdpfxsxrz T Ts Al Isg

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Bljdpfotu U Ebjx Al Ieg

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Bedpfokckx Ujx Al Ijlg Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg