Tool cutter

Macmon M 100

Condition: ready for operation (used), Macmon M100 Universal Milling Machine - Milling spindle - Number of spindle speeds: 16 Gbjdpoztfmyefx Aqijr - Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm - Spindle internal taper: ISO 40 - Collet bore up to: 25 mm Ø - Spindle block travel (manual): 170 mm - Angular milling table - Size of clamping surface: 640 × 195 mm - 2 T-slots, width/spacing: 12 / 90 mm - Longitudinal travel, automatic/manual: 290 / 310 mm - Vertical travel, automatic/manual: 310 / 340 mm - Feed gear - Number of feeds: 16 - Feed rates (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 - Motion lead screws - Longitudinal travel of the table (1 revolution): 5 mm - Vertical travel of the table (1 revolution): 2.5 mm - Drive motor - Power: 1.3 / 1.8 kW - Speed: 700 / 1400 rpm - Documentation Dimensions: L x W x H 1.0 x 1.0 x 1.3 meters / Weight 700 kg Errors and omissions excepted.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Gbodpeibwarsfx Aqior Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Condition: ready for operation (used), Tool milling machine MACMON M 100, including 3-axis digital display / from a university - In very well-maintained original condition - 3-axis digital display - Travel ranges X/Y/Z: 310x340x170 mm - Speed range: 40 - 2500 rpm - Automatic feeds - Feed rate range: 9-450 mm/rev - Tool holder: ISO 40 - Swiveling vertical head - Drilling quill / vertical head: 70 mm - Horizontal / vertical milling attachment Gsdszpy Dxepfx Aqiobr - Rigid angular table: 600x225 mm - Coolant system - Drive power: 2.5 kW - Chip tray - Machine feet - Documentation - Dimensions: L x W x H: 1.5 x 0.8 x 1.7 meters / Weight: 1100 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, total height: 1,600 mm, total length: 1,100 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 890 kg, table length: 600 mm, table width: 210 mm, 3-phase 380-volt, 2-speed motor is running smoothly! Gearbox-driven spindle, gears running in oil. 16 spindle speeds adjustable from 40 to 2000 RPM. Horizontal and vertical milling possible. Power feed on the X and Y table axes. Gbsdpfx Aqsznn E Ujijr 16 feed rates adjustable from 9 to 450 mm/min. ISO40 (SK40) spindle mount. Head is adjustable in degrees. 3-axis DRO with Heidenhain scales. E-Stop switch. Coolant pump inside the machine base. Table size: 600x210mm Made in Germany. Year of manufacture: 1989 Weight: 890KG Overall dimensions: 110x110x160cm Very good overall condition! Many accessories included, see pictures! Contact us for shipping options! €6,250.00 excluding VAT!

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features Gbjdpegd H U Usfx Aqior • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Gbodpov Azb Nofx Aqior

Condition: ready for operation (used), Tool milling machine MACMON M100 incl. digital display Gsdszdui Eopfx Aqiebr - Digital display - Travel ranges X/Y/Z 310x340x170mm - Speed range 40-2500 RPM - Automatic feeds - Feed rate range in steps 9 - 450 mm/min - Tool holder ISO 40 - Swiveling vertical head - Drilling quill / vertical head 70mm - Horizontal / vertical milling attachment - Rigid angular table 600x225mm - Coolant system - Drive power 2.5 KW - Chip tray - Work light - Machine feet - Documentation Dimensions: LxWxH 1.5x0.8x1.7 meters / Weight 950 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Gsdemhfrropfx Aqiobr Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Gbodpfxsrywa Rs Aqisr Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation Gbsdpfx Aqerwml Aeisr The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Controller Cabinet: KRC2 Gsdehakfaopfx Aqisbr Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min Gjdpfxetqqn Rj Aqiebr quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant Gsdjwngkrepfx Aqiobr

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions Gjdpfx Aqsxl E Syjijbr

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Gbjdpfx Aqjrazzrsior