Used Dust Extraction,Filtration Teka for sale (7,428)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Itedpfsl Dw U Dex Ag Ujh "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point Itjdpfx Asib Dadog Uoh capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Ijdpfxexf Up Io Ag Uoth

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table Itodponyhvqjfx Ag Ueh extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Iedpfx Agsxvpums Uoth Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Year of construction: 2015, condition: used, Colour: White Empty weight: 117 kg Dimensions (LxBxH): 257 x 82 x 19 cm - Year: 2015 - Documentation available: No - CE certificate present: No - Serial number: 2433368305 - Suitable for material: Wood dust - Capacity [m³/h]: 0 - Negative pressure [Pa]: 2 - Main fan [pcs]: 1 - Main fan power [kW]: 1.5 - Number of filter bags [pcs]: 1 - Filter length [mm]: 540 - Filter diameter [mm]: 45 - Filter surface area [m²]: 0 - Connection diameter [mm]: 120 - Number of connections [pcs]: 1 - Options: Collection bins, Knock-off system, Movable, Control cabinet - └ Type of shaking system: Manual Isdpfx Agszd A Sbj Ueth - └ Number of bins/bags [pcs]: 1 - Transport dimensions: 2570mm x 820mm x 195mm (l x w x h) - Transport weight [kg]: 117kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,400 mm, total length: 2,450 mm, total width: 650 mm, Colour: Grey Empty weight: 250 kg Itjdpoyy R Ryjfx Ag Ush - Documentation available: No - CE certificate present: No - Suitable for material: Wood dust - Main fan [pcs]: 1 - Number of filter bags [pcs]: 3 - Filter length [mm]: 1200 - Filter diameter [mm]: 500 - Filter surface area [m²]: 7 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Options: Collection bags - └ Number of bins/bags [pcs]: 3 - Transport dimensions: 2450mm x 650mm x 2400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Dust extraction system for grinding dust from a vocational training center. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Itedpfx Aozbir Dsg Uoh

Year of construction: 2022, condition: used, Colour: Silver Empty weight: 800 kg Itedoy Tlpkopfx Ag Uoh Dimensions (LxBxH): 480 x 200 x 240 cm - Year: 2022 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4329 - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Main fan [pcs]: 2 - Main fan power [kW]: 7.5 - Number of filter bags [pcs]: 5 - Filter length [mm]: 1100 - Filter diameter [mm]: 520 - Filter surface area [m²]: 9 - Connection diameter [mm]: 520 - Number of connections [pcs]: 5 - Transport dimensions: 4800mm x 2000mm x 2400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm Itedpfxofrpnwo Ag Uoh -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration Iodpfxozcqxue Ag Uoth 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2001, condition: used, functionality: fully functional, Used wet and dry vacuum cleaner (dust extraction system) in good condition. Isdpfxszb Ipuj Ag Ujth Extraction capacity: 1,800 m³/h.

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. Itsdozdddyepfx Ag Ush The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers 2 pieces available Iedpfeivta Nox Ag Ujth Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Very good condition, directly from production!!! Itjdpfx Aoiyyxcjg Ueh

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Itodoy N Duqjpfx Ag Ujh Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to Itedpshm E S Ajfx Ag Ush to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow: approx. 6000 m³/h Iedpob Ilxdofx Ag Ujth -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Itedpfjy T Uxnex Ag Uoh Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Itodsy Sz Dnspfx Ag Uoh Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Itedpfjuc Unqsx Ag Ueh Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. Itsdpfx Aswcd I Rog Ujh The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. Itedpfx Agjwcdrve Uoh ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW . Itjdpfx Agsy Rf Uhj Ujh

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Itedpfx Agsx Hamqe Uoh