Used Kreuzmayr Ksc 50 for sale (34,584)

Condition: new, Year of construction: 2025, Stainless steel version, double-walled, insulated Net capacity: 60 x 60 x 100 cm (L x W x H) Bedpfxjg Ngzpj Ab Dswt Long smoke system Drip tray Metal rod for hanging thermometer Air flaps for smoke regulation 2 pcs. Supply air flaps Economy smoke producers

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles Bjdpsvptt Rjfx Ab Dswt - Conveyors and collection table

Year of construction: 2023, condition: new, functionality: fully functional, We are offering Brand new Kreuzmayr KEB 750 full fruit processing line which is located in Baku,Azerbaijan. All details you can find in document which will be included below. Bwedeuikf Ejpfx Ab Djt

Year of construction: 2009, operating hours: 550 h, condition: used, Preinstalled mobil complete system inclusive impeller juice pump, high efficient boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 41kW WOLF gas boiler Hot water circulation pump Expansion vessel Bjdeclttpspfx Ab Dowt Automatic temperature control plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 500l juice per hour Dimensions (LxWxH): 1450x980x1700mm Weight: approx. 468kg

Year of construction: 2020, operating hours: 20 h, condition: as good as new (ex-display), The mobile Kreuzmayr units are used for the processing of fruit juices on site. The fruit is loaded into the washing container with the bin tipper, transported to the grinder, crushed and then conducted to the sieve belt press. The generated juice is automatically pumped into tanks, heated to about 80° C in the pasteurizer, and then filled into Bag in Box. The following machines are built on the trailer: • Bin Tipper Kreuzmayr GKE • Wasching and Crushing Unit KWEM 2000 • Single Belt Press KEB 750 with cleaning brush • Bigger juice pan for the KEB 750 Bedpfxjc Rghyj Ab Dowt • Pomance conveyor • Stainless steel tank 530 Liter with hanging sieve • Pasteurizer Kreuzmayr PAS 1500 Liter oil • Bag in Box filler Kreuzmayr KBF 2000 special construction for mobile trailer • Accessories: like pumps, air compressor, high pressure cleaner, hoses and fittings • Trailer with canvas cover, pneumatic brake system and antilocking system The trailer has only a few operating days and is thus in a new condition.

Condition: new, Year of construction: 2025, functionality: fully functional, Conical rotary sieve for filtering juices, mounted on a stainless steel frame; Bwjdpfjq H Axxsx Ab Dst integrated juice collection tank 150 l, equipped with a filling level sensor for automatic switching of the subsequent juice pump depending on the filling level. Diameter: 550 mm Screen perforation: 0.3 mm Power supply: 3x400V, 50 hz, 0.5kW/16A

Condition: new, Year of construction: 2025, Stainless steel version, double-walled, insulated Usable space: 102 x 64 x142 cm (L x W x H) Long smoke system 3x drip tray Bwsdpfx Abog Ng Amj Dot Metal rod for hanging thermometer Air flaps for smoke regulation 2 pcs. Supply air flaps Economy smoke producers Optional for a surcharge: - Flue gas flap control - Electric immersion heater

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Bwjdpfjzt Nywex Ab Djt With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual Bwsdpfx Ajzx S Iuob Dst CE / conformity documents

Year of construction: 2025, condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Capacity up to 750l/h incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 Bwjdpfs Uv Itex Ab Dst canvas cover with gas pressure spring for both sideboard, backboard able to open 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Year of construction: 2020, condition: new, Stainless steel design auger type infeed hopper For de-stoning of cherries, plums, sour cherries, apricots, peaches,... For different sieves Sieve with perforation Ø 5 mm is in the machine Bjdocl Tu Ispfx Ab Dswt Electrical power supply: 400V 50 Hz 3 Phases / 11 kW Capacity: 2500 kg/h (depending on fruits and ripeness) Stepless rotor speed regulation

Year of construction: 2025, operating hours: 55 h, condition: new, Kreuzmayr pulping machine throughput: 650 kg/h stainless-steel construction Bwjdsygmxspfx Ab Det

Year of construction: 2025, condition: new, Additional installed holding section. After reaching the adjusted pasteurizing temperature of Bsdsgig Igopfx Ab Djwt 90°C, to hold the juice on this temperature for 3 seconds, before it goes into the heated buffer tank of the filler.

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Robust shut-off and check valves in various designs – ideal for industrial applications in water, air, and material handling technology. These high-quality valves impress with their sturdy construction, reliable sealing, and ease of use. Perfectly suited for maintenance, replacement, or expansion of existing systems. Various sizes and models available. Immediately ready for use and in good condition. Bjdpsy Smtnofx Ab Dswt 8x 150 DN 16 PN EBRO 2x 125 DN 16 PN EBRO 3x 150 DN 16 PN JET

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Bedpfxezx S Ego Ab Dowt Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm Bwjdezxyuispfx Ab Dot - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: used, functionality: fully functional, power: 400 kW (543.85 HP), Becker Type 48/50 Shredder – 400 kW incl. Drive and Voith Turbo Coupling For sale is a Becker Type 48/50 shredder with a 400 kW drive. The machine was used for the processing and shredding of electric motors, electronic waste and cables and is particularly suitable for electrical and metal-containing materials. Extensively refurbished: * All plates and wear plates replaced * Rotor completely renewed * Rotor cutters replaced * Apron conveyor completely overhauled Bwodszygghspfx Ab Dst * Wear parts on the apron conveyor replaced * Voith turbo coupling overhauled * Drive completely overhauled * New motor mounting plate * New discharge chute made of stainless steel * New discharge hopper * New cast grates Scope of delivery: Becker Type 48/50 shredder, 400 kW drive, overhauled Voith turbo coupling with overload protection, new motor mounting plate, new stainless steel discharge chute, new discharge hopper, new cast grates, and a spare parts package including a used spare rotor. Following the extensive refurbishment, the machine is in very good and operational condition. An on-site inspection is recommended. Further technical data and documentation are available upon request. Price: upon request

Year of construction: 2025, condition: new, functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Bwjdpfxsclt Sbj Ab Det Belt width 1500mm High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition)

Year of construction: 2024, condition: new, functionality: fully functional, Kreuzmayr citrus juicer KCE 1000 Newly developed industry standard citrus juicer Hourly output Approx. 2500 kg oranges (depending on the size of the fruit) Juice yield approx. 50%, i.e. approx. 1250 l/h juice Drive power 9.0 kW Weight 700 kg Total height of the machine 2600mm Feeding height of the fruit approx. 1950mm Peel discharge screw Integrated juice finisher for fine filtration of the juice after pressing Bodpfxjq Huxis Ab Djwt The machine can be operated with dry oranges (without washing), The juice does not come into contact with the peel, thus minimizing the amount of peel oil in the juice

Year of construction: 2025, condition: new, consisting of: - Trailer Bsdpecl Tvgsfx Ab Djwt - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Condition: used, Chip Conveyor, Elevating Conveyor, Used Machine Manufacturer: KabelSchlepp KS Convogliatore Type: 50 Year of Manufacture: 2005 Weight: 600 kg Technical Specifications: Overall Dimensions (W x D x H): 3750 x 1060 x 1510 mm Bsdpfxsy Nnmds Ab Djwt Belt Dimensions: 4400 x 420 mm Slat (Flight) Dimensions: 355 x 45 mm Slat Pitch (Distance): 300 mm Discharge Outlet Size: 450 x 335 mm Heavy-duty construction, ideal for metal chips and industrial scrap

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Standard implementation: Lifting force: up to 550 kg / box Bwedpscl Tx Djfx Ab Djt Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Weight: 350 kg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Bwsdpfex D D Abex Ab Dst Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 394F00438, Year of construction: 2015, operating hours: 9,935 h, load capacity: 5,000 kg, lifting height: 4,354 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,354 mm Mast height: 3,050 mm Fork length: 1,200 mm Fork width, maximum: 1,260 mm Fork width, minimum: 330 mm MACHINE DETAILS Mast type: Duplex Number of wheels: 4 Fuel type: Diesel Engine manufacturer: Linde Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,190 x 3,050 mm Unladen weight: 6,655 kg Operating hours: 9,935 h EQUIPMENT Bwjdpjzxci Asfx Ab Det Side shifter Joystick Work light Documentation CE marking

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: Bedpfszl E Stex Ab Dswt 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.