Used Multi-Trans Val 30 for sale (32,519)

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Iisdpjxrtgfsfx Abpef Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Iisdpfxsxrtqwo Abpof Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: Iedpfx Abjxrtdqjpsif 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Iijdpfx Abjxrtb Njpsf Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), functionality: fully functional, load capacity: 25,000 kg, Equipment: UVV, - Towing capacity: maximum 25,000 kg - Bed size: 1,955 x 1,170 (1,120 at the rear) - Bed height: 1,000 mm Ijdpfx Abozmttbspoif - Drive: 2 x 10 kW electric motor, 80 V / 930 Ah - Features: optimal maneuverability, robust and reliable

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Ijdpfswq N Sdsx Abpoif Length:7100mm Width:2500mm Height:900mm

Condition: excellent (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Heavy Duty industrial trailer Multi-Trans - ARL-4PA Platform height: 900mm Platform length: 7000mm Platform width: 2400mm Max. loading capacity:40000T Number of axes: 2 Number of wheels: 8 Length: 7000mm Width: 2400mm Height: 900mm Iijdpfx Abjxzz E Uopof Weight: 120000kg

Condition: new, empty load weight: 870 kg, maximum load weight: 2,630 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 870 kg - Payload: 2.630 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - side wall attachment - 60 cm corrugated grid attachment - spare wheel - storage box - battery - 230 V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iiedpju Htz Hsfx Abpsf

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 950 mm, loading space volume: 6.3 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 95 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2.540 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Hot-dip galvanized leaf grate, 60cm, 3-sided swinging, unassembled - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - spare wheel - storage box - battery - 230V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iisdpou Ht Adefx Abpsf

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Iijdpfx Absxrr Uhopsf Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Isdjxrtkwopfx Abpjif Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Ijdpfx Asyrf T Eobpsif

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Iijdpouf Rw Tjfx Abpof Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Iedpoxrtlusfx Abpoif Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41638 Krone, SDC 27 Highcube * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Suspension: Air * Gross vehicle weight: 41,000 kg * Tare weight: 5,240 kg * Payload: 35,760 kg * Permissible gross vehicle weight: 41,000 kg * Axle manufacturer: Krone * Tire condition, 1st axle: -- - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: -- - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: -- - Tire size: 385/55 R22.5 * Wheelbase: 1310 mm * Tire size: 385/55 R22.5 * Krone SDC 27 eLTU5-2 * Height-adjustable locking mechanism * High Cube Container * Additional release valve for releasing the brake * Container capacity: 1 x 40' container with tunnel, 1 x 45' container with tunnel * 2 x 20' containers * 1 x 20' container, flush at the rear * 1 x 20' container, centered Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service Iedpfxezt Htnj Abpjif * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 5,190 kg, maximum load weight: 35,810 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 02/2020, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2020, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing Iiodpfx Abszt Hr Rspjf * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Iijdpfx Aezm Izysbpjf Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 5 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, suspension: air, tire size: 385/55 22,5, tire condition: 30 %, wheelbase: 1,310 mm, color: black, Year of construction: 2020, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, of commercial vehicles * Fast and uncomplicated financing Iiedpfxszd Nvgs Abpof * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 4 Technical condition: good Iedezlct Iepfx Abpeif Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, empty load weight: 1,630 kg, maximum load weight: 970 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, loading space volume: 15.7 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Interior dimensions: 378 x 181 x 230 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes, large saddle compartment - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door holder - Feed troughs: no, optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 106 to 127cm, adjustable - Distance between stall bars: 173 to 205 cm, adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullman2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tying possibility outside - Tying possibility inside - Stainless steel tie rod mounted on the right + suitable for feed troughs - Floor-to-ceiling ALU entrance door on the right + sliding window + aluminum handle, lockable - Tack room inside XXL with swiveling saddle holder - PVC transparent partition wall - Single wheel mudguards, plastic (black) - many sliding windows - rubber glued to floor and sealed - hay net hooks - step protection on side walls (GRP plastic) - maneuvering handle - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light Light system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ijdpfxju Hrtho Abpoif

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Iedpfx Aezn H D Nobpeif Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: used, maximum load weight: 509 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,950 mm, loading space width: 1,600 mm, loading space height: 120 mm, total width: 2,240 mm, total height: 830 mm, Multitransporter 3016, manufacturer TEMARED, model DMC, gross weight: 750 kg, 295x160 cm, with overrun brake, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable. Subject to errors and prior sale. Iedpfxeym Ih Is Abpoif

Condition: excellent (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor -Rotary valve: completely overhauled -Manufacturer: Rota Val, rotary valve type HD 300 with drive Iedpfohgm Dqex Abpoif -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1400 / 33 rpm -Inlet opening: 300 x 300 mm -Outlet: 300 x 300 mm -Dimensions: 720/700/H460 mm -Weight: 183 kg

Condition: good (used), mobile welding fume filters, welding fume extraction -portable Iedsb A Ng Ijpfx Abpoif -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Condition: used, Year of construction: 2016, Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 Ijdpjzqa Nkjfx Abpeif discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW 50 Hz, 380V center distance: 75 mm Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics