Four-sided planer Martin T 90

Martin T90

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Serial number: V 215410 Year: 1994 Dsdpfx Ajyq D Ifjf Ssup Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Number of phases: 3 ~ Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Dedpfx Afsw A A Ebe Sjup

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE Dujdpfet R T Hcex Af Sep OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. You can also send messages in English. Dodpfx Afju I N D Ho Soup 31.3.5

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm Djdpfx Afepq If Do Soup cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Dujdpfjizkhvox Af Ssp Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Dsdpsrq Ebfofx Af Soup Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Duodpfog Ngixsx Af Sjp Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2001, condition: ready for operation (used), Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible. Duodeurwy Aepfx Af Sep

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE Duodjwry I Ejpfx Af Ssp