Multi-spindle drilling machine

MASTERWOOD

Condition: used, Year of construction: 2020, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Hsdpfx Anozux T Nslot Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Number of spindles: 21 pieces, pitch 32 mm Hjdpfx Aneh U Damolot Spindle spacing: 640 mm Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Unfortunately, we cannot respond to inquiries that do not contain complete contact information.

Condition: ready for operation (used), Year of construction: 2006, input voltage: 400 V, number of axes: 4, controller manufacturer: Masterwood, overall weight: 3,800 kg, Masterwood Projekt 415 4 axis CNC machine Working area 3200 x 1335 4 working fields ISO30 10.5 HP spindle C-axis Hodezv S Suepfx Anlet Toolchanger 12 positions 6 supports Schmalz double channel Vacuumcups 17" screen Drillinghead 16 spindels (horizontal and vertical) Machine in working condition Pneumatic lifters Vacuümpump Becker Fence left, right and back Safety mats in the front (not checked) WIndows control Masterwork CAD-CAM system Available from 31 of August 2026 Price on request

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Hjdsy Ay Akopfx Anljt Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts Hsdpfx Aouiy Hrsnlet - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), Year of construction: 2005, table length: 3,000 mm, CNC Wood Machining Centre manufactured in 2005. This MASTERWOOD TEKNOMAT 5000 features a main milling unit and a second milling unit, both with a tilting range of 0–90°. It includes a drilling head, an Anuba hinge insertion unit for various hinges, and a screwdriver unit. The machine also has sliding supports with suction cups and a vacuum pump. If you are looking to get high-quality woodworking capabilities, consider the MASTERWOOD TEKNOMAT 5000 machine we have for sale. Contact us for further details. • Main Milling Unit Tilting Range: 0–90° • Second Milling Unit Tilting Range: 0–90° • Drilling Head: Included • Anuba Hinge Insertion Unit: For single-stem and double-stem hinges Hedjzug Easpfx Anlot • Screwdriver Unit: Included • Workpiece Supports: Sliding supports with suction cups • Vacuum Pump: Included • Clamping System: Mechanical and vacuum clamping

Condition: ready for operation (used), Year of construction: 2010, This 3-axis MASTERWOOD OM B1 CN3KF was manufactured in 2010. It features a Bedano head and a horizontal milling motor, ideal for creating slots for shutters or blinds. With a working length of 2600 mm and a very good condition, it includes a PC with integrated software running Windows XP. Consider the opportunity to buy this MASTERWOOD OM B1 CN3KF CNC Wood Machining Centre. Contact us for more information. Hodpfx Anszugu Usljt Machine Benefits Technical Machine Benefits • Working length: 2600 mm • The machine has a bedano head + horizontal milling motor to make slots for shutters or blinds. • The software is integrated into the supplied pc and can make slots with bedano and slots for shutters. • Supplied pc with windows xp operating system. • Very good condition and does not have many working hours. Extra Information Machine still under power

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Hodpjuiy Ngsfx Anlet Training of your employees

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing Hjdpfx Anjd Ih Htslot - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (Techn.According to the manufacturer - without guarantee!)

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Hedpfx Anjzqzhbolet Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm Hedpfeuyyhaox Anlet - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Hodpfxsvu U Itj Anlet Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Code: 0743 Brand: MASTERWOOD - ITALY Model: SPEEDY 207 - CE Standard Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 vertical and 1 double horizontal independent chucks - Spindles rotation rpm 4500 Saw for longitudinal cuts - Saw rotation rpm 6000 Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Vertical pneumatic tool displacement mm 60 Max panel thickness mm 50 Vacuum pump 16 m3/h for panel clamping Vacuum cup diameter mm 80 Clamping cylinders for narrow workpieces against fixed rear stops Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Safety protection: carpet sensitive to the presence of people Overall dimensions - Machine : mm 2500 x 1500 x 1800 h - Weight kg 860 Overall dimensions - Electric board : mm 800 x 550 x 1100 - Weight Kg 120 Hjdjzp D Nljpfx Anljt

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Hjdpfeh Txmtex Anlet Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm

Condition: used, Year of construction: 2016, max. workpiece length 4500 mm profile spindle 1 Stück Hedpjzn Ahwsfx Anlst main drive 19,2 kW