Bench drill

Maxion Unimax 2T

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. Hfedpfsqhkukjx Apnjg The machine is still in production. Viewing possible by arrangement.

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm Hfsdslgvkiepfx Apnsg - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Hedpoh Tnd Asfx Apnsfg Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Hfedpfx Ajt H Ty Uepnjg swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm Hfedpfx Apotqqnwsnjg z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Hfedpog Ufvbjfx Apnjg Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Hsdpfsfu Itbex Apnofg Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH Hfodpfx Apeuy Sazsnog

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 Hedpfx Aoby Stpopnefg - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: new, Year of construction: 2026, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Hfsdpfx Apeby Swhonsg Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!