Drill press

MAXION UNIMAX 3 AVG

Year of construction: 2022, condition: new, Automatic shrink wrapper with 90 degree. Made in Italy (2022) 380-415V / 50-60Hz Machine is in a good condition. Gedpfopdp I Asx Afcsbw

Condition: excellent (used), Year of construction: 2019, We can now offer one Vertical Lift Modules from SSI Schaefer of the latest model. SSI Schaefer is the world's leading manufacturer of warehouse automation and their model of vertical storage lifts Logimat SSL is just like their other solutions, of the highest quality and standard. These vertical lift is configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Module is each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. Available for immidiate delivery. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Gjdondcbcspfx Afcsbw Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Gbjdjfgyh Ujpfx Afcew

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand FANUC Model 310is-WA Main Drive Number of axis 5 Movement Godov Rr Rdjpfx Afcebw X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece X 1050 mm Workpiece Y 775 mmm Workpiece Z 300 mm Additional Equipment Includes all accessories in the photos Includes digital documentation This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2003, operating hours: 2,916 h, functionality: fully functional, machine/vehicle number: P 032B1591, workpiece weight (max.): 1,000 kg, feed length X-axis: 550 mm, feed length Y-axis: 370 mm, feed length Z-axis: 410 mm, feed rate X-axis: 900 m/min, feed rate Y-axis: 900 m/min, feed rate Z-axis: 900 m/min, continuous power (apparent): 13 kVA, feed length W-axis: 120 mm, The subject of the sale is a Fanuc Robocut Alpha-1iB EDM machine. Gbsdpfovwk Alox Afcew The year of production of the machine is 2003. The machine has worked 2916 hours, including 178 hours of cutting. The machine has been described by the expert as efficient and in very good condition. Axis travel: X: 550mm / 900 mm/min Y: 370mm / 900 mm/min U: 120mm / 450 mm/min V: 120mm / 450 mm/min Z: 410mm / 900 mm/min

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Gjdpfx Afjbi S Dijcjbw Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0113647, Offer 22109 Technical specifications: Gedpfjwmnn Nex Afcebw - Drilling capacity - in steel 18 mm - - in aluminum 20 mm - Drill spindle mount MK 2 - Drilling depth 100 mm - Spindle to column projection 215 mm - Drill spindle speeds continuously variable 100 - 1800 rpm - Drive 400 V / 0.65 / 1.20 kW - Base plate / drill table 280 x 320 mm - Max. distance between drill spindle and base plate approx. 520 mm - Space required approx. W 350 x H 1050 x D 700 mm - Weight approx. 100 kg - With keyless drill chuck 1 - 13 mm

Condition: ready for operation (used), Year of construction: 2016, Main Drive Gbjdpfx Aswk Rrxofcsw Number of axis 6 Table Table load 15 kg Additional Equipment Premium control panel with wall bracket and cable holder External gas cleaning device Adjustable electro-pneumatic valve Wire feed equipment This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Application Types Welding

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V Gsdeqfcviepfx Afcsbw - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Drilling machine IMATEC AV-32 Drilling capacity in steel ST 60: 32 mm Spindle taper: MK 3 Spindle stroke: 150 mm Infinitely variable spindle speeds: 80 – 1170 rpm Feed Arm reach: 290 mm Maximum distance table – spindle: 780 mm Table with 2 T-slots: 480 x 400 mm Height adjustable via rack and pinion with hand crank Drive: 400 V / 0.9 / 1.3 kW Required space approx. W 600 x H 2100 x D 900 mm Gbedpfev A S Rhox Afcjw Weight approx. 420 kg