Vertical band saw

Mebor VTZ 1400 / 1600 PLUS

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² Rjdpfxow Dp Ufo Agyon - Control cable: 2 × 1.5 mm²

Condition: excellent (used), Buderus SB 625 -185kw boiler Rsdpfou I Rx Ssx Agysn

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Viewings are available by appointment. Redpfjv Umb Eox Agyen

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Rjdjuqk Azopfx Agyjn

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix Rjdpfohd I Smsx Agyon * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm Rsdpeucnt Hofx Agysn With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,900 mm, total height: 3,000 mm, total length: 19,500 mm, type of input current: three-phase, warranty duration: 12 months, overall weight: 13,000 kg, table width: 800 mm, The line is designed to produce EURO 1200/800 pallets . In order to nail the pallets efficiently, three people are needed to operate it: to for stacking bottoms one person and for stacking pallet tops two people. The capacity of the machine is 2500 pcs per 8h, also it depends on the workers and their speed in stacking the pieces. The pallet after being nailed together is received by the milling machine, which mills the pallet, cuts the corners and burns the marks, after which the pallet enters the stacking machine, which cuts the pallet to a size of 1200, rotates it and stacks it with an elevator . Stacking can be done in a so-called sandwich (29 pieces), or individually up to (20 pieces). pieces). Behind the stacking machine is storage for three pallet poles. Rodpfot Tbuyox Agyen The line is adapted for sawdust extraction

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Rodpfx Astk N Dkegyon

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Rodpfxehclffj Agyon Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: Redpfx Aof Eknnogyjn • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.