Band Saw

Metora MB 330/3

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Pgodpfegf H Saox Adiow Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Pjdpfx Aet D Azcodiegw Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: new, Year of construction: 2025, cutting width (max.): 350 mm, cutting height (max.): 280 mm, warranty duration: 12 months, - Swarf Brush - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Detection - Stop System / Blade Breakage Switch - Stop System - 2 Pieces 60 cm Roller Table - Movable Control Panel - Lighting Lamp / Led Lighting TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KMY 2DG 280 Capacity +90° (mm) Capacity +90° (mm) Round Round Ø 280 Square Square 280 X 280 Rectangle Rectangle 280 X 350 Capacity +60° (mm) Capacity +60° (mm) Capacity -60° (mm) Capacity -60° (mm) Round Round Ø 280 Square Square 270X270 Rectangle Rectangle 180 X 330 Capacity +45° (mm) Capacity +45° (mm) Round Round Ø 240 Square Square 210 X 210 Rectangle Rectangle 170 X 240 Capacity -45° (mm) Capacity -45° (mm) Round Round Ø 200 Square Square 160 X 160 Rectangle Rectangle 160 X 260 Capacity +30° (mm) Capacity -60° (mm) Round Round Ø 140 Square Square 120 X 120 Rectangle Rectangle 60 X 160 Pgedpfevvg Egjx Adisw Capacity -30° (mm) Capacity -90° (mm) Round Round - Square Square - Rectangle Rectangle - Main Motor 1.5 kW /300 Nm Hydraulic Motor Hydraulic Motor 0.18 kW Coolant Motor Coolant Motor 0.12 kW Band Saw Blade Size 3660 X 27 X 0.9 mm Material Feeding Height 790 mm Vice Maximum Opening Vice Maximum Opening 350 mm Vice Maximum Closing Vice Maximum Closing Zero Zero Vice Height Vice Height 160 mm Table Width Rolled Table Width 370 mm Height-Width-Length Height-Width-Length 1400 X 1350 X 2300 mm Weight Weight 900 kg

Condition: used, Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW Podpfxjqvp Nkj Adisgw -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Pgedpfx Adsxdwbkeijw Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, Year of construction: 1990, cutting diameter 320 mm saw band length 4600 x 32 x 1,1 mm 500 x 320 mm cutting speed 16 - 96 m/min total power requirement 2,1 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 1,4 x 1,8 m Semi-automatic band saw Pgjdpfx Adjwu Hihsijw - Miter max. 45° - Micro-spray device

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW Pedoxab Hcepfx Adiogw height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: new, Year of construction: 2025, cutting width (max.): 500 mm, cutting height (max.): 350 mm, warranty duration: 12 months, - Swarf Brush - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Detection - Stop System / Blade Breakage Switch - Stop System - 2 Pieces 60 cm Roller Table - Movable Control Panel - Lighting Lamp / Led Lighting TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KMY 2DG 350 Capacity +90° (mm) Capacity +90° (mm) Round Round Ø 350 Square Square 350 X 350 Rectangle Rectangle 350 X 500 Capacity +60° (mm) Capacity +60° (mm) Capacity -60° (mm) Capacity -60° (mm) Round Round Ø 350 Square Square 330X330 Rectangle Rectangle 330 X 450 Capacity +45° (mm) Capacity +45° (mm) Round Round Ø 340 Square Square 300 X 300 Rectangle Rectangle 250 X 320 Capacity -45° (mm) Capacity -45° (mm) Round Round Ø 320 Square Square 200 X 200 Rectangle Rectangle 200 X 380 Capacity +30° (mm) Capacity -60° (mm) Round Round Ø 210 Square Square 180 X 180 Rectangle Rectangle 160 X 200 Capacity -30° (mm) Capacity -90° (mm) Round Round - Square Square - Rectangle Rectangle - Main Motor / Torque Main motor / Torque 3 kW / 500 Nm Hydraulic Motor Hydraulic Motor 0.18 kW Coolant Motor Coolant Motor 0.12 kW Band Saw Blade Size 4860 X 34 X 1.1 mm Pedpfx Asvvg Hdsdiegw Material Feeding Height 845 mm Vice Maximum Opening Vice Maximum Opening 500 mm Vice Maximum Closing Vice Maximum Closing Zero Zero Vice Height Vice Height 240 mm Table Width Rolled Table Width 570 mm Height-Width-Length Height-Width-Length 1600 X 1400 X 2850 mm Weight Weight 1450 kg

Year of construction: 2001, operating hours: 33,733 h, condition: ready for operation (used), General Data Measurements width 4400 mm // 6100 mm Measurements depth 3300 mm // 2100 mm Measurements height 2800 mm // 3000 mm Machine weight 6055 kg // 9000 kg Media Pjdpfx Adjxaqlhjiegw Power consumption 11 KW It's a Sawing & Drilling Machine system. These MEBA 560 DG-1000 and PEDDINGHAUS TDK 1000 /9P were manufactured in 2001. It features a metal band saw with a cutting capacity of 90°: Round 560 mm, Flat 1000×560 mm. The saw blade dimensions are 9300×54×1.6 mm, and it operates with a cutting speed of 18 to 95 m/min. The drilling machine has 9 drill Spindles, 3 per axis. Consider the opportunity to buy this Sawing & Drilling Machine system. Contact us for more information about this machine. Application Types Sawing

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm Pgedpfxexabpwj Adijw capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device