Mitutoyo QS250Z CNC vision measuring machine – year of manufacture 2017 – incl. software & accessori

Mitutoyo QS250Z CNC Vision

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] Hjdpsuhav Defx Aquefn - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Hodpehrdmxefx Aqujfn Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece. Hjdpfxouz If Ns Aquefn

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Hodjglp Nqepfx Aquofn Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Wheel width 180 mm Module - max. 7 Module - min. 0.5 Clamping length 420 mm Number of teeth 10 - 600 Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Hfjdpoykrmcsfx Aqujn Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Hjdpfxevffcps Aqusfn Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2005, condition: ready for operation (used), - USED - 6-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 320 mm MAX TURNING DIAMETER: 32 mm SPINDLE: 200-8000 rpm; 3,7 - 7,5 kW COUNTER SPINDLE: 200-7000 rpm; 1,5 - 2,7 kW X1-AXIS TRAVEL: 108 mm X2-AXIS TRAVEL: 228 mm Y1-AXIS TRAVEL: 275 mm Z1-AXIS TRAVEL: 325 mm Z2-AXIS TRAVEL: 130 mm Z3-AXIS TRAVEL: 410 mm RAPID FEEDS X-Y-Z: 20 m/min DRIVEN TURRET HEAD: 8 POS; 200 - 5000 rpm CONTROL UNIT: CINCOM SYSTEM M6D Hodpfx Aqovthv Iouefn BAR FEEDER: IEMCA Mod. BOSS 332 EVOLUTION WEIGHT: 2850 Kg ACCESSORIES: PARTS CATCHER

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Hedpfxsya Aq Re Aqujfn Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Hodet Hw Txjpfx Aquefn Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 Hedpewizt Djfx Aquofn POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] - Number of working hours : 11500 [h] EQUIPMENT - CNC : Fanuc Oi TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank - Bar loader : Tornos SBF 320 - Electric transformer