Veneer cutter

MONGUZZI AFD S35/3000

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min Ledjw Dp Ufjpfx Ah Ueta - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 220992, SECOND HAND END CUTTING SAW WITH ELECTRONIC PUSH FEED STROMAB MOD. TR500 MATRIX - CE RULES - infeed with roller table and electronic push feed MATRIX of 6000mm - Outfeed roller table1500mm - 10 hp motor - Blade diameter: 500mm Ltsdpfxet U I A Ho Ah Uja - Blade rotation speed: 3500 rpm - Maximum cutting capacity: 360mm (L) at 55mm (H), 200mm (L) at 135mm (H) - Minimum cutting section: 20mm (L) x 10mm (H) - ELCO numerical control - 415 volts - Serial number: 220992 - Year 2002

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included. Lsdpfx Ahegwqk Sj Usta

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), compressed air connection: 6 bar, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 630 mm, Well-maintained wide belt sander available 2 rollers for pre-sanding and fine sanding 2 feed speeds Electrically adjustable height with digital readout Sanding width: 630 mm 2 extraction ports Assistance with loading can be provided. Ltjdsuh Sccjpfx Ah Usa

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION! Ltjdpfxstrdwte Ah Uoa

Condition: used, Press system : Continuous / Calender Major suppliers : Bison / Berstorff Design capacity : 160 m³/day Lodpfx Aoul H Nmsh Usta Capacity achieved approx. : 200 m³/day Effective working time : 23 h/day Reference thickness : 3,2 mm Max. gross board width : 2500 mm Max. net board length : 2440 mm Max. net board width : Unlimit Min. net board width : 1220 mm (splitting) Min. board thickness : 2,0 mm Max. board thickness : 10 mm Electric system : 380 V, 50 Hz Year of manufacture : 1985 Major upgrades : 2007-2009, 2016 Operated until : May 2018

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Ltjdpfjwmxh Tex Ah Usa

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Ledpfx Ahjpugwij Uota The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Lsdpfx Ahsudy A Ns Ueta Two working fields with dimensions of 620x110cm.

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. Ljdpfev Hxrgox Ah Usta The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.