Used 3 Axis Cnc Milling Machine for sale (97,991)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Todpfx Adexcgtgelef Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Tedpfov Dulqsx Adljf

Condition: good (used), The machine is in good technical condition. Tjdpfx Aex Ai Igedlof Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 10,500 kg Total table area: 1000 x 5000 mm Number of T-slots: 7/140 mm Width of central slot: 22H7 Longitudinal travel (X-axis): 5000 mm Cross travel (Y-axis): 1000 mm Vertical travel (Z-axis): 1400 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Minimum distance from vertical spindle face to table clamping surface: 125 mm Spindle taper: ISO 50 Spindle diameter at front bearing: 100 mm Tool taper: ČSN 22 0434 (DIN 69871 - A 50) Drawbar force of clamping mechanism: 16,100 N Swivel range of horizontal spindle: bi-directional +177.5° to -180° Swivel range of vertical spindle: bi-directional +177.5° to -180° Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2500 rpm Number of speed steps: stepless Feed range: 1 to 5000 mm/min Rapid traverse in Y and Z axes: 10 m/min Rapid traverse in X axis: 15 m/min Maximum approach speed to reference point: 3000 mm/min Spindle head rotation about machine cross axis: +177.5°, ±180° The machine has undergone partial general overhaul (GO).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2351, travel distance X-axis: 490 mm, travel distance Y-axis: 370 mm, spindle speed (max.): 2,000 rpm, table width: 255 mm, table length: 900 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business liquidation. Placing a bid obligates the buyer to collect the machine promptly between 26.01.2026 and 29.01.2026! Todpfx Adjxqm Aqeljf TECHNICAL DETAILS Travel on X-axis: 490 mm Travel on Y-axis: 370 mm Spindle speed: 40 – 2,000 rpm Tool holder: SK 40 Automatic spindle head movement: 290 mm Manual spindle head movement: 300 mm Manual milling spindle height adjustment: approx. 100 mm Table dimensions: 900 x 255 mm Feed range: 10 – 500 mm/min Rapid traverse: 1,500 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3-axis digital readout Machine vice mounted (jaw width 160 mm)

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Tedpfx Adoxvddvolef

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Tjdpfxsxr A A As Adlsf Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) Todpfx Aexpqy Dedlof - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Tjdsxd Am Sjpfx Adlsf

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars Todpoxl Dnajfx Adljf • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components.

Condition: used, x-travel 600 mm y-travel 210 mm z-travel 425 mm table-size 950 x 230 mm turning speed range 31,5 - 1250 U/min power requirement 1,5 kW tool adaptor ISO 40 | feed speeds 4- 250 mm/min | weight 1,1 t range L-W-H 1,8 x 1,5 x 1,63 m Universal tool room machine - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system Tjdpfxelug Une Adljf - machine light - 16 gear steps

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Tjdpoxu I Atsfx Adlsf

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tsdpfsw Ea Swsx Adlef Tool-to-tool change time: 7 s

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, travel distance X-axis: 15,000 mm, travel distance Y-axis: 5,150 mm, travel distance Z-axis: 2,000 mm, feed length Z-axis: 1,600 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 8 rpm, total width: 6,400 mm, total height: 10,370 mm, total length: 19,300 mm, torque: 34,300 Nm, table load: 80,000 kg, overall weight: 137,000 kg, spindle diameter: 250 mm, W250H plate drilling and milling machine with S80B rotary table 4000x3550 mm, maximum load 80,000 kg. The machine is in very good technical condition. It is in continuous operation and can be inspected while machining a component. Tjdpfjxzzzvex Adlef

Condition: excellent (used), Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Tedewif Rmspfx Adlsf Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Todpot R Tgiefx Adljf Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Todpfx Ajva Hd Rjdlof Accessories Machine vice (jaw width 120mm) *

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor Tsdpfx Adexdxhrelsf X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Todpfew Ea Rtjx Adljf Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Todpfx Adsxtpqvolof

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Tsdpexdwndsfx Adljf Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: like new (used), Year of construction: 2010, functionality: fully functional, feed length X-axis: 1,020 mm, feed length Y-axis: 490 mm, feed length Z-axis: 620 mm, CNC milling machine BOMAC Model FBL 1000 CNC Table 1370 x 400 mm Longitudinal travel: 1020 mm Cross travel: 490 mm Tjdpexxa Iiefx Adlsf Vertical travel: 620 mm ISO 40 Used machine Internal code: 305

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Todpfxjxmd Szo Adlsf Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580mm mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Todpfow Ea R Hex Adljf Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, table width: 825 mm, table length: 2,300 mm, overall weight: 12,500 kg, MILLING MACHINE GLOBA TRADE MOD. U 1900 CNC CNC SELCA MOD 3045 TABLE 2300 X 825 LONGITUDINAL TRAVEL X: 1900 mm CROSS TRAVEL Y: 800 mm Tjdpfxewxyh Ss Adlef VERTICAL TRAVEL Z: 850 mm ISO 50 SPINDLE MOTOR POWER: 15 kW WEIGHT: 12,500 kg USED MACHINE INTERNAL CODE: SVR 348

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Todpfx Ajxmd Shjdlsf Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.