CNC turning and milling machining center

DMG MORI NLX1500SY/500

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES Fpedpfxsw Hxi Ds Abusc + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Fpedpfx Absur Hfzousc

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Fjdpoxdc Suefx Abuspc Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Equipment: Chip conveyor Electronic handwheel

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 30,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 7,000 kg, workpiece weight (max.): 500 kg, controller manufacturer: Heidenhain, controller model: TNC 640, rotary table diameter: 320 mm, tool weight: 4,000 g, Equipment: chip conveyor, ALZMETALL 5-axis CNC vertical machining center Type: GS600 E/5 Year of manufacture: 2018 Control: Heidenhain TNC640 XYZ travel: 460 x 600 x 400 mm Fjdpfx Asw Rldbebujpc Spindle speed: 30,000 rpm Spindle cooling 3D probe Roll-up roof cover Blum laser measurement Erowa Robot Easy zero-point clamping system with 10 pallets Max. workpiece weight: 500 kg Machine weight: approx. 7 tons Rotary table diameter: 320 mm Spindle hours: 19,450 hours Oil-air lubrication for the high-frequency spindle

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Fpjdjyabt Dopfx Abuec Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Wheel dresser Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2017, x-travel 3600 mm y-travel 1100 mm Fjdpfxex H Twvs Abujpc z-travel 900 mm weight of the machine ca. 30450 kg

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Fpedpfxjw T Sd To Abusc Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm Fedpfxsww Nazo Abuspc control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Max. travel X-axis: 325 mm Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Weight approx: 1200 kg Fjdpswhiycofx Abuepc colour: Light grey, dark grey, red

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox iGen 5 Press’ Object of sale: Fpsdpfx Aju Ecqbjbusc 1 x Xerox iGen 5 Press with the following equipment: incl. FreeFlow Print Server incl. 2x Paperdeck YVC-2 incl. Finisher YVC-3 incl. 5th colour in orange Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 15,719,744 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.