Used 3 Stacking Boxes for sale (71,102)

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Klsdpeghymhofx Addel Vacuum carpet

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) Kjdpjqt Dmyofx Addell - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2013, Description For sale is a fully functional and very well-maintained gas burner from the brand Weishaupt, including gas train (Dungs DN 80) 1. Burner type: WM-G30 Capacity: 600-5700 kW Klodpfx Aowgbq Dsddel Version: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm Kodpjwg R I Esfx Addoll • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 17,100 mm, shelf height: 3,500 mm, shelf length: 5,700 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 3, 3 two-bay pallet racks (M35112711-3) each 5.7 m long, 3.5 m high, 1.1 m deep, each 2 bays, 2.7 m wide, each 3 beam levels, shelf load 3000 kg. - 9 frames (RM3511 - RAL5019) - 18 base plates, shims, screws - 36 floor anchors (ZZBA1210) - 36 individual beams (T2711 - RAL2008) - 3 load plates (BSMcP) Frames bolted, not pre-assembled Ksdpjv Urpzjfx Addoll Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), 800 m² storage platform Schäfer R3000 3-story used, top condition, as good as new, see pictures 3 floor shelf system Schäfer Lift included Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Kjdpfohzw Ivox Addell Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 2.500 m² storage platform Schäfer R3000 2-3 storeys used, top condition, as good as new, see pictures Manufacturer SCHÄFER R3000 CAD planning and assembly 2-3 floors Price on request! Partial sale possible Negotiation price: on request! Goods are in stock and promptly available Transport and assembly possible on request. Visits are possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Klsdofiqhljpfx Addol Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), We offer a 3-fraction screen from the renowned company BEZNER. Dimensions: 2 x 4.5 m Capacity: 80 cubic meters per hour The screen is in perfect condition, as shown in the photos. Klodpfx Adsxau Aqjdsl

Condition: used, Three head band saw IDC000093 Kodpfx Adoupt Sisdjll - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head - for sawing pallet boards - feed chain - feed pushers from the top

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Kljdpfex Tp N Ujx Addol Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Klsdpoyanydsfx Addel Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Kjdpjyanv Sjfx Addsll Equipped With: Per RD 17/06/25 updated description & raised price.

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Kedpfxsx Ryuis Addjll Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: good (used), Frampton ST-2-3-P conveyor grill Stainless, two tier conveyor oven, belt dimensions 2800mm x 450mm, variable speed, digital temp controls, 20Kw, mobile, 3Ph Kljdpfxenp Ncyj Addel

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing Kjdpfjybtnvox Addoll - carton discharge

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request Klsdpswnhfkjfx Addsl EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Klsdpfox Tiq Sox Addsl Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, 2100 mm 7 mm 6 mm roll diameter 190 mm min. dia. 285 mm 4 kW 3200 kg 4000x1350x1500 mm Kjdpsyb S Etjfx Addoll Equipment: - motorized rear roller adjustment - Digital display - Automatic conical bending. - Foot switch - Safety devices

Condition: good (used), Year of construction: 2020, operating hours: 536 h, CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: JP Please contact Vink Machinery for more information Maeda MC285C WME-3 * 2020 * Diesel and 380 volts * 536 working hours * 8.7 meter hook height * 8.2 meters horizontal reach * 2820 kg lifting capacity * Remote control * Inspection until June 2024 * 2160 kg own weight * including documents Kljdpsm Nb Tlsfx Addjl

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens Kjdpfx Asw R Un Aoddell We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Kledpfx Adoycck Aodjl -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Condition: used, machine/vehicle number: ZCFA90D020243xxxx, mileage: 207,223 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 22198 Specifications: • 2004 model • 207,223 km (will increase slightly) • EU approved until: 19.06.26 • 4x2 • Manual transmission Klodsya Ubbjpfx Addsl • Euro 3 engine • 182 hp • 3-way tipper • Remote control for tipping • Front suspension: steel • Rear suspension: air • Tires (see pictures) • Some sweating on the tipping cylinder • Air conditioning • Radio • Lights • Video • Delivery ready Description: We have a 2004 Iveco 90E18 4x2 tipping truck with 3-way tipping for sale. There is some sweating on the tipping cylinder. Besides this, the truck works as it should according to the owner. There is little rust on the frame compared to the year model and mileage. The truck is delivery ready. Km: 207223 HK: 182 Technical approved: Yes EU-approved until: 19.06.2026 Own weight: 4830 Total Weight: 9000 Payload: 4095 Width: 240 Length: 595 Kw: 134 Euro: 3 Model: 90E18 4x2 tippbil m/3 veistipp Gearbox: Manual

Condition: used, machine/vehicle number: YY9SL28MX2T01xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22195 Ksdjya T U Tspfx Addjll Specifications: • 2013 model • EU-approved until: 12.06.26 • 3-axle • Tires (see pictures) • Hydraulic drive-over ramp • Extra reverse lights • Ready for delivery Description: We have a 2013 Damm SL-28M 3-axle machinery trailer with hydraulic drive-over ramp for sale. Everything works as it should according to the owner. Some cosmetic damage may be present since it is from 2013. It is EU-approved and ready for use. Ready for delivery. Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 7780 Total Weight: 30000 Payload: 22220 Width: 255 Length: 1192 Model: SL-28m 3 akslet maskinslep m/ hydraulisk kjørebro

Condition: used, Year of construction: 2011, machine/vehicle number: 26260117, fuel type: diesel, Empty weight: 3.400 kg Lifting capacity: 200 kg Working height: 2.600 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 1350 m Kedpfotr Ny Dsx Addoll Transport dimensions (LxWxH): 6.68x2.1x2.95 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2000, Carrying capacity: 32.120 kg GVW: 6.880 kg Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Front tyre size: 385/65-22.5 Rear tyre size: 385/65-22.5 Please contact PFEIFER GROUP for more information Klsdpfx Aotr Hrxsddol