Used Lumber Stacking Line for sale (11,455)

Condition: good (used), Year of construction: 2003, Mechanization for destacking wood bundles up to 6 meters long. Bundle deposit chains with a 5-position storage magazine 1 tilt-type destacker 1 descent section with strip retrieval Bwsdsycxd Eopfx Afkjn 1 stick separator with bars 1 horizontal conveyor with 5 chains

Condition: used, Year of construction: 1993, functionality: not functional, Platon Stacker 7 meter transfer Bsdpfxspy H E Dj Afkjwn

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Bodpfok T Aqwox Afkswn

Condition: used, tilting depiler for 6-meter packages, discharge chains, four-sided feeder with striking wheel, moulder outfeed with stacker, price on site not dismantled Bwjdeyw S Rvepfx Afkjn

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. Bsdpfx Afoy Auvxokjwn 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker Bedpowgbw Rsfx Afkown 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Lh hand machine Bwodpfxsy R S Ize Afksn Rh Hand Machine

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Bedpfx Aeynrzbjfkswn Condition: Good Available: Immediately

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Bwodpfoy T N Ttex Afkjn

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Bodpfxoy Enwhs Afkown Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical Specification Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Thrust force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with spindle SK50 Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system - 1 pallet shuttle with 2 storage stations - 1 manual pallet transfer system between machine and shuttle - 2 workpiece carrier pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Pitch between chain pockets: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - ICS / coolant through spindle center, 3,000 l tank, Capacity: 30 l/min, pressure: 7 bar at the tool 2 x chip conveyors Portal enclosure Bwsdpotix S Nofx Afksn Touch probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation: 2 copies (German / French) CE marking Very well maintained, continuously serviced condition!

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 Bwodoyzhvvspfx Afksn 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Bwodpfx Afotqmwgjkjn Lubeca LW303 can seamer

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. Bwjdpfx Asyq Tb Ijfkjn After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Bwjdpsyq Ezysfx Afken

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more Bedped Ecncofx Afkown 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. Bwedsv I S D Sspfx Afksn 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors Bjdpfx Aovw Egrefkewn All manuals and spare parts included Can be seen running In excellent condition

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Bwodpfx Aeyv A Dkefkon Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. Bedpfx Asp T Tghsfkjwn A Weigh bagging system can be added to the grated cheese line

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Bedoyzxyxspfx Afkswn Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: Bedpfxeycwvaj Afkswn 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder Bwsdsdkf I Tjpfx Afkjn -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: used, Safe Line metal detector Equipped with stainless steel reject flap Fully stainless steel and easy to clean by means of hatches Metal detection diameter: 200 mm Bjdpfx Aex Nzzzofkswn Total installation height: 1200 mm See our other listings VMA Wekerom

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Bwsdpfx Aev Awgusfken Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free