4 parallels buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: Goupxdn Haas VF-3 Vertical Machining Center - 1994Machine Specifications: Table Size 48" x 18"Max Table Load 1,500 Lbs.X-Axis 40"Y-Axis 20"Z-Axis 25"Spindle Nose to Table Top 4" - 29"Spindle Taper CAT 40Spindle Speed 10,000 RPMSpindle Motor 15 HPTool Changer 20 ToolsApprox Weight 12500 [...] Dimensions 118" x 110" x 117"HEquipped With: -- Chip Conveyor -- Manuals --3.5" Floppy -- Rigid Tapping -- Programmable Coolant -- 4th Axis Pre-WireHaas VF-3 Vertical Machining... more
16

Bending Machine Kunkel URM 30 F

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Ser. No. 060951094, pressing force 30 t, output 4 kW, pump faultyDEelektrische Biegemaschine (int. Nr. 000170), #410Ser.-Nr. 060951094, Presskraft 30 t, Leistung 4 kW, Pumpe defekt Bclw8lzfnh more
2

Moulder 9 sp. 80 m/min LEADERMAC Maximac 930

Hardinxveld-Giessendam, NetherlandsNetherlands
6242 km
2007
good (used)
LEADERMAC moulder, type Maximac 930 Manufacture year 11-2007 Machine specifications: - Planing width 20 – 300 mm - Planing height 10 – 150 mm - Cardan driven feeding system, motor 22 kW Bclqkft9w9 - Feed speed 6 - 80 m/min Spindle lay-out: 1. Horizontal spindle bottom, motor 18.5 kW 2. Horizontal spindle top, motor 22 kW 3. Vertical spindle right, motor 15 kW 4. Vertical spindle left, motor 18.5 kW 5. Vertical spindle right, motor 15 kW 6. Vertical spindle left, motor 18.5... more
5
Thread-tapping jaws, spare jaw S0xpjxecb Thread cutting sizes - 6 x M 20 / 2 x M12 / 2 x M 16 / M 22 / 24 M / M 27 / 3 x M 30 -R-1/2 3 / 4 R 1 2 Complete price Weight 12.4 kg more
6
Galvanized you search SLP shelving system pallet racks, metal shelves, heavy load shelves, or gondola shelving. Then you are exactly correct with us, we have a huge selection of different manufacturers, sizes and lengths. A wide range of accessories from shelves, backs, subdivision brackets, hooks, bins and much much more. Do you need help? No problem, our knowledgeable staff is available with help and advice. Gladly we make you an individual offer, please contact simply by phone or ... more
6
Vehicle data - make: Toyota - type: 8FBET18 / / hours. 2821 / battery 2015 / Containerfähig - drive type: electric - load capacity: 1800 kg - load Centre of gravity:-lifting height: 3320 mm - range: 0 mm - year: 2015 - operating hours: 2821 - internal No.: C0404 _ Mast data - mast type: duplex - lifting height: 3320 mm - height: 2145 mm - free lift: 1460 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ 9q0hezjff Dimensions - length: 0 mm - width: 0 mm - height: 2145 mm - weight: 3260 kg _ ... more
1

MACHINING CENTER - CNC (VERTICAL) KASUGA QUANTUM Q-1250V

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbuxywxyom Kasuga Quantum Q-1250V CNC Vertical Machining Center -- X-Axis travel 50". -- Y-Axis travel 25". -- Z-Axis travel 25.6". -- Table Dimensions 63" x 23.6". -- Maximum weight on table 3300Lbs. -- Rapid traverse rate X & Y-Axis 787 IPM -- Rapid traverse rate Z-Axis 590 IPM -- Spindle center to column 27.5 -- Spindle nose to table 6.3" - 31.9" -- Spindle motor 25HP. -- Spindle taper CT50. -- Spindle speed 12,000 RPM. -- Tool po... more
30

Lathe GDW 520 CS

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2010
ready for operation (used)
Ser. No. 3201-001, control unit, make Siemens, type Sinumerik, 3-jaw chuck, 4-fold revolver head, tailstock, centring tip, work lamp, tip height/weight 260/1,500 mm Juy8ci more
6
max. wheel diameter 275 mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis... more
5
Roller conveyor, conveyor, roller conveyor, roller conveyor -not powered -4 x roller wheels Track width 2220 mm Roll width 500 mm Transport length 2600 mm Rollers ø 80 mm Roller spacing 170 mm Total height roller conveyor 300 mm Transport dimensions 2600/1500/H1070 mm Weight 340 kg Lnvx9 more


4 parallels
daily

New machines via email!

Stay updated!
6
Galvanized searching Tegometall shelving system pallet racks, metal shelves, heavy load shelves, or gondola shelving. Then you are exactly correct with us, we have a huge selection of different manufacturers, sizes and lengths. A wide range of accessories from shelves, backs, subdivision brackets, hooks, bins and much much more. Bquzuhd Do you need help? No problem, our knowledgeable staff is available with help and advice. Gladly we make you an individual offer, please contact simp... more
6
Vehicle data - make: Linde - type: H30T 02 //Bj 2013 / HH 4180 mm / side-shift - drive type: LP gas - load capacity: 3000 kg - load Centre of gravity:-lifting height: 4180 mm - range: 0 mm - year: 2013 - operating hours: 14754 - internal No.: C046 7 _ Mast data - mast type: standard - height: 4180 mm - height: 2730 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2730 mm - weight: 4830 kg _ Fk27p7v Battery & charger - batte... more
1
Elect./Voltage: Gluwwvtyo DYNAPATH DMC E4 Machining Center -- Table size 48.8" x 18" -- Table T-slots (W x H) 0.71' x 4 -- Max. table load (center) 1320lbs -- X axis travel 41.7" -- Y axis travel 22" -- Z axis travel 24" -- Spindle nose to table surface 4.8"~28.9" -- Spindle center to column 23.6" -- Table surface to floor 33.3" -- Spindle speed 6,000 [...] -- Spindle motor 10HP -- Spindle taper CAT#40 -- Spindle belt 8YU belt -- Ball-screw diamet... more
20

Guillotine Shear Trumpf Tru Shear 5163

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2007
ready for operation (used)
Ser. No. 108544-W, work width 3.050 mm, cut thickness max. 16 mm, electr. Back gauge, 4 support brackets with a T-groove, length 1,500 mm, left bracket with side stopper, 2 protection fences with light barrier, hours operating hours approx.18,950DETafelblechschere, #324Ser.-Nr. 108544-W, Arbeitsbreite 3.050 mm, Schnittdicke max. 16 mm, elektr. Hinteranschlag, 4 Auflagekonsolen mit T-Nut, Laenge 1.500 mm, Linke Konsole mit Seitenanschlag, 2 Schutzzaeune mit Lichtschranke, Arbeitsleistung Betriebs... more
5
work piece width:300 mm workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW weight of the machine ca.:3,3 t 3ot8m2sjo dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Number of drilling agregates:3 Stk. feed stepless:25 - 300 mm / min saw blade diameter:630 mm cutting width:6 mm cutting speed:32 m/min Peddinghaus CNC controlled beam saw drill line DSC300 A with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring s... more
5
Air cooler, evaporator, cold storage, refrigerated containers, cooling cell -4 x fan Fan diameter 500 mm Lamb Elen spacing 10 mm Housing made of stainless steel Drip tray Rysdvqabk -2 x cooler available Award pieces 4550/1100/H940 dimensions mm Weight 600 kg / piece more
7
Hovama 10.80 metres heavy load shelving pallet rack shelf height 390x87cm storage rack; Heavy load shelving Manufacturer: Hovama width: 10.80 m Height: 3.90 m Depth: 0.87 m Fields: 4 Flat per box: 3 Load capacity per 2400 kg pair of traverse Scope of delivery: Bagbcver2b 05 x Hovama heavy load shelving pallet rack rack rack green 490x105cm 24 x Hovama heavy load shelving pallet rack beam green 270x10x5cm Shipping costs please contact us. Find more articles in our shop! more
6
[...]: 5940\\\ * Device details: * Load capacity: 3000 kg Lifting height: 4650 mm Free lift: 1380 mm Mast type: triplex mast height: 2170 mm Length/width/height: 2750 / 1270 / 2200 mm Operating weight: 4495 kg * Equipment: * * Protection umbrella * 3rd valve * Working lights front Barlizd3cl * Working light rear * Attachments: * * Side-shift \\**Weitere device information: * \ on request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers ... more
1
Elect./Voltage: C0gflfpe HAAS VF-4 CNC Vertical Machining Center -- Travels 50" x 20" x 25" (X, Y, Z). -- Table Size 18" x 52" T-Slotted Table. -- Max Weight on Table 3500 LBS. -- Spindle Taper CAT 40. -- Max RPM 7500. -- Spindle Drive Motor 15 HP. -- ATC Capacity 20. -- Memory 1MB. -- Machine dimensions 126" x 111" x 115" H. -- Machine weight (approx.) 15,500 [...] with: -- Haas CNC control. -- Programmable coolant. -- High torque. -- 3.5" floppy (convertible to USB). --... more
16

Drill Suhner Monomaster BEM20 125

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2007
ready for operation (used)
Equipped with 4 drilling units, make Suhner, type Monomaster BEM20 125, table dim. 500 x 3,000 mmDE4-fach Reihenbohranlage (int. Nr. 000006), #464Bestueckt mit 4 Bohraggregaten, Fabr. Suhner, Typ Monomaster BEM20 125, Tischabm. 500 x 3.000 mm Fzy90n9 more
2

Faceplate UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
faceplate diameter:1000 mm total power requirement: kW weight of the machine ca.:0,5 t dimensions of the machine ca.:1 x 0,2 m Dsqhila bore:300 mm face plate diameter 1000 mm with 4-jaws backside ring gear is removeable 8 fixing holes dia. 25 mm, bolt circle diameter 330 mm more
5
NH limiter Rcosixut -NH 3 -630A 500VAC price per package -4 piece Weight 3.2 kg more
11
CNC - 4-axis lathe manufacturer: Okuma type: LU 25 2 SC 1250 Year of construction: 1998 Control: OSP U 100 L turning length: 1,000 mm Turning diameter: 420 mm Ø bed: 650 mm Spindle diameter: 120 mm spindle bore: 80 mm speed: 65-3,500 rpm 2 turret: 12 + 10 positions Tool holder (both revolvers): VDI 50 space required approximately L: 4.65 m B: 2.45 m Bclqwwfmaj Weight: 10.000 kg Amenities - tailstock -Conveyors -Feed -div tool holder. more
6
[...]: 5939\\\ * Device details: * Load capacity: 3000 kg Lifting height: 4650 mm Free lift: 1370 mm Mast type: triplex mast height: 2150 mm Length/width/height: 2700 / 1250 / 2180 mm Operating weight: 4510 kg * Equipment: * * Protection umbrella * 3rd valve * 4 valve * Full free lift * Working lights front * Working light rear \\**Weitere device information: * \ single pedal 3rd and 4th valve with quick release Quick coupler with last good shovel and fork positioner On req... more
1

MACHINING CENTER - CNC (VERTICAL) HAAS VF-4D

More Haas Vf 4
North Carolina, United StatesUnited States dealership location
518 km
2004
used
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Glvd82d HAAS VF-4D -- Table size 52" x 18". -- Max table load 3,500 Lbs. -- X axis travel 50". -- Y axis travel 20". -- Z axis travel 25". -- Spindle nose to table top 4" - 29". -- Spindle taper CAT40. -- Spindle motor 20 HP. -- Spindle speed 7,500 RPM. -- Rapid traverse rates 1,000 IPM. -- Cutting feed rates 650 IPM. -- Tool changer capacity / style 20 + 1 position / umbrella. -- Machine dimensions 153" x 93" x 110". -- Weight 13,500 [...] Wit... more
22

Lathe Esco New Mach 641 (NM64X) 300-M 641-4 AXES

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2012
ready for operation (used)
Control unit, make Fanuc, type Series 21i-TB, reel, oil mist extraction, operating hours control unit on: approx. 37,500, equipped with a counter clamp and hydraulic transverse axis (X2) Bclxhtnt0g more
2
cutting diameter 320 mm band length 550 mm cutting range square 320 x 320 mm strokes -stepless 4, von 40-107 mm/min sawblade 550 x 50 x 2,5 mm total power requirement 3,2 kW weight of the machine ca. 1,1 t Uzldw dimensions of the machine ca. 1,95 x 0,9 x 0,85 m Condition: ready for operation Electric 380 Volt Cooling equipment Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5
Contact expander module, safety relays Type Expander module PZE X 4 24VDC 4n/o -76 x shooter available R290cz3nn Price per piece Weight 0.2 kg / piece more
2
We offer for sale: Mesh pallet frame used for Euro pallets, Dimensions: 800 x 1200 mm Secure hold on the pallet Ncfoj 4 snap-mounting bracket on the narrow sides of the euro pallet 1200 x 800 mm Safe stacking Stacking corners with wide bearing surface and the high lip. Dimensions: 1,215 x 820 x 825 mm (without wooden pallet). Pallet extensions: 29.0 kg per piece from stock 21698 Harsefeld - transport freight forwarding partners possible more
6
[...]: 5922\\\ * Device details: * Load capacity: 4000 kg Lifting height: 5000 mm Mast type: Standard mast height: 3300 mm Length/width/height: 2950 / 1500 / 2870 mm Operating weight: 6500 kg * Equipment: * Bapxvoawrg * Protection umbrella * 3rd valve * 4 valve * Full cab * Heating * Working lights front * Working light rear * Attachments: * * Double pallet fork \\**Weitere device information: * \ on request we take care of transport to you. Another 250-300 forklifts, at... more
1

MACHINING CENTER - CNC (VERTICAL) KOMO VMC 50/160

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Gcxawcf 1996 Komo VMC 50/160 CNC Vertical Machining CenterSpecifications: -- X-Axis Travel: 160" -- Y-Axis Travel: 32" -- Z-Axis Travel: 32" -- Axis Traverse Rates: X, 600 IPM; Y, 600 IPM; Z, 600 IPM -- Max Cutting Feed Rate: 250 IPM -- Table Load Capacity: Unlimited (table does not move) -- Table Dimensions: 160" x 32" -- Spindle Speed: 0-3500 -- Spindle Motor: 25/30 HP -- Spindle Taper: CAT ... more
28

CNC Press Brake Trumpf Trumabend V 500

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2005
ready for operation (used)
Ser. No. B0501A0022, pressing force max. 500 kN, stroke max. 215 mm, work width 1,300 mm, 4 axis back gauge, CNC-bombing, Bend Guard, control unit, make Trumpf, type Tasc 6000, operating hours machine on: approx. 34.600DEHydraulische CNC-Abkantpresse, #320Ser.-Nr. B0501A0022, Presskraft max. 500 kN, Hub max. 215 mm, Arbeitsbreite 1.300 mm, 4 Achsen-Hinteranschlag, CNC-Bombierung, Bend Guard, Steuerung, Fabr. Trumpf, Typ Tasc 6000, Betriebsstd. Maschine ein: ca. 34.600 Yrtxiw more
6

Balancing Machine SCHENCK 210 FBTS

Monheim, GermanyGermany dealership location
6405 km
2009
used
workpiece weight 4 kg Vr2xau workpiece length 200 mm dia. on complete length 200 mm Control electrics - voltage/frequency 400 / 50 V/Hz dimensions 4,1 x 4,2 x 2,5 m connected load 12 kVA flange diameter 250 mm weight 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows more
5
Laser bar code scanner, position scanner Type CLV620-3300 Price per piece -4 x available Bn8qhdhg Weight 0.3 kg more
6
KBA Rapida 105-5 SW PWHA Age: 2004 Format: 74x105 cm Counter: 120 mio. 4/1 5/0 Washing devices Ergotronic Colortronic Powder Machine in production Test possible more
6
[...]: 6020\\\ * Device details: * Gfec9tn3o Load capacity: 6000 kg Lifting height: 3430 mm Mast type: Standard mast height: 2600 mm Length/width/height: 3300 / 1890 / 2630 mm Operating weight: 9860 kg * Equipment: * * Full cab * Heating * Working lights front * Bluespot \\**Weitere device information: * \ on request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you available immediately. Also for rent! We like to buy their old.... more
1
Elect./Voltage: Bbuxu0ypj9 MAKINO "RMC-55" CNC Mill -- Fanuc OM control -- Overall Table Size 31.5" x 12.6" -- X-Axis Travel 21.6" -- Y-Axis Travel 12.6" -- Z-Axis Travel 13.8" -- Spindle Speeds 45 - 4,500 RPM -- Spindle Feeds 0 - 315 IPM -- Feed Rate .04 - 197 IPM -- Spindle Nose to Table Top 4" - 17.75" Maximum -- Spindle Center to Column 2.95" - 15.55" -- Spindle Taper ISO 40 -- Spindle HP: Spindle HP: 5/7.5 -- Rapid Traverse Rate (X,Y,Z-Axes): 47... more
18

Bending Machine Kunkel URM 30

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Ser. No. 060951094, pressing force 30 t, output 4 kW, pump + display faultyDEelektrische Biegemaschine (int. Nr. 000214), #406Ser.-Nr. 060951094, Presskraft 30 t, Leistung 4 kW, Pumpe + Display defekt W29h707d more
7
X-Y-Z 500 -450-400 mm, table surface 630 x 500 mm, table load 200 kg, workpiece tabele swivle range -5/+110°, nc-rotary table 360°, milling spindle 63 HSK- 18.000 U/min, spindle drive 9,0/13,0 Kw, tool length 300 mm, tool dia. 80/130 mm, Werkzeuggewicht 6 kg, rapid travel 24 m/min, machine weight 6,5 to. equipped: * CNC SIEMENS 840 D-SL * Software: DMG MORI Messenger * Electronic handheld control Bclue8ynt2 * CELOS * 21,5 Ergoline Control mit Multi-Touch-Screen * 30 - ATC * NC-swivel... more
4
Security control, Sicherheitsrelays Jta3qq Type Expander module PZE X 4 24VDC -Charge: 60 x relays available Price per piece Weight 0.2 kg more
4

CNC Lathe MORI SEIKI NLX 2500 Y / 700

Wiesbaden, GermanyGermany
6536 km
2013
excellent (used)
CNC-Lathe MORI SEIKI NLX 2500 Y / 700 Mfg. year 2013, Installed 08/2014 M-730 BM MAPPS 4 control movements: X-axis: 260 mm Y-axis: +/- 50 mm (100 mm) Z-axis: 795 mm C: 360° tailstock: 734 mm Max. turning diameter 366 mm Max. turning length 705 mm Max. bar working capacity 80 mm Spindle motor 18,5 kW Max. spindle speed 4.000 rpm Haqywzj A2-8 spindle nose 12-station turret (Mori Seiki type) All stations for driven tools, driven tools 5,5 kW, max. Drehzahl 10.000 rpm tailstock ... more
6
[...]: 5853\\\ * Device details: * Capacity: 1600 kg Lifting height: 3140 mm Free lift: 1520 mm Mast type: Duplex mast height: 2090 mm Length/width/height: 2100 / 1050 / 2100 mm Operating weight: 3000 kg * Equipment: * * Protection umbrella * 3rd valve * 4 valve * Full free lift * Working lights front \\**Weitere device information: * \ single pedal design UVV 5/2018 On request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you av... more
1

MACHINING CENTER - CNC (VERTICAL) HAAS VF-2SSYT

More Haas Vf 2
North Carolina, United StatesUnited States dealership location
518 km
2013
used
Elect./Voltage: Glunysk9q HAAS VF-2SSYT VERTICAL MACHINING CENTER -- Table Size: 36" x 18" -- X-Axis Travel: 30" -- Y-Axis Travel: 20" -- Z-Axis Travel: 20" -- Spindle Nose to Table: 4"-24" -- Rapid Traverse Rate: 1,400 IPM -- Cutting Feed Rate: 833 IPM -- Spindle Taper: CAT 40 -- Spindle Speed: 12,000 RPM (Direct Drive) -- Spindle Motor: 30 HP -- Automatic Tool Changer: 24 Station (Sidemounted) -- Tool to Tool: 1.6 sec Equipped with: -- Haas CNC Control... more
22

Vehicle Lift Hirschland ESH 2840

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1997
ready for operation (used)
Ser. No. 156, load-bearing capacity max. 28,000 kg, rated output 4x 2.2 kW, stroke height max. approx. 1,700 mm, connection box, height of the lifting columns approx. 2,500 mm, control boxDEfahrbare 4-Saeulen-Lkw-Hebebuehne, #471Ser.-Nr. 156, Tragkraft max. 28.000 kg, Nennleistung 4x 2,2 kW, Hubhoehe max. ca. 1.700 mm, Anschlusskasten, Hoehe d. Hubsaeulen ca. 2.500 mm, Steuerkasten Bclpjmsu2r more
2

Spot welding machine DALEX SL 25/EA4

Gebhardshain, GermanyGermany
6478 km
refurbished (used)
As LEX rocker arm spot welding machine SL 25/EA4 Compressed air-operated, water cooled Rated output at 50% ED: 25 kVA SEC short circuit current: 22.4 k S open-circuit voltage: 5.2 V Electrode force: 36-278 daN Arm projection: 180-500 mm adjustable Arm distance: 140 or 300 mm complete with 8-position switch for power control as well as 4 times asynchronously control unit for single-point/series point Cq3evzt3 Sample photo more
5
Time relay, rear power switch, relay, heating current monitoring, contactor, SSC, contactor Type KPW 20 5/1A 400V Price per piece S0x20iqll -4 x available Weight 0.7 kg more
3

Spot Welding Machine ARO 1245 SC

Bünde, GermanyGermany dealership location
6460 km
1986
used
current capacity 28 kVA throat 350 mm contact pressure capacity 550 daN welding power in mm 4 + 4 st steel plate in the continuous operation light metal 1,6 + 1,6 mm secondary current intensivity between 17.200 + 24.000 Amp. electrode diameter 25 mm normal electrode stroke ca. 50 mm water consumption bei 2 bar= 340 Ltr./h weight of the machine ca. 300 kg dimensions of the machine ca. 0,9 x 0,5 x 1,5 m Condition: good Electric 380 Volt T3beduw Foot pedal Electrode adjustment pneumatic ... more
1
CNC guillotine shear (4.000 x 4 mm) SMA-REF-6270 Type: guillotine II 4/40 Year: 1989 Sheet thickness: Steel: max. 4 mm Working range: Cutting length: 4.000 mm Controlled back stop (1.000 mm) Control Wieger COM 101 Condition: ready for action under power Location: Northern Germany Dimensions: 5.200 x 2.500 x 1.600 mm Availablility: on demand Terms of delivery: ex works Terms of payment: 100 % vor Abbau/Verladung more
1
Elect./Voltage: Glt23lznu Mazak MAZATECH H-500/50 Horizontal Machining Center - 1991Machine Specifications: -- Control: Mazatrol M-32 -- Axis TravelX Axis Travel: 28"Y Axis Travel: 25.6"Z Axis Travel: 25.6" -- Pallets, Number of: 2 -- Pallets Size: 19.7" x 19.7" -- Pallets Load: 2,200 LBS -- Pallets Index: .001 DEG -- Spindle Taper: CAT 50 -- Spindle Speed: 10,000 RPM -- Spindle Motor: 20 HP -- Tool Magazine: 40 ATC -- Machine Dimensions: 185"L x 129"W x 118"H -- Machi... more
10

Transfer Machine Mikron CENTROMAX CNC

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1995
ready for operation (used)
         accessori:    -   Table with 4 stations Bcloitrkad more


4 parallels
daily

New machines via email!

Stay updated!

to

to

Edit search
4 PARALLELS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close