Built in 1998
99o3slvfy
Working widths 560 mm
Equipment:
3rd folding unit:
• 4 buckle plates
• noise prevention
I sell the 4-head 3-side brushing machine Baldoni.
Sellable immediately.
I8ysezovo
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump
-comes from a machining center
-Max. Pressure: 50 bar
-Stage 1 liter output: l/min
Wpam0umdm
-Level 2 liter output: l/min
-Motor: 4 kW 1500 rpm 3 x 230 V
-Hydraulic tank: 630/420/H400 mm
-Dimensions: 700/450/H800 mm
-Weight: 140 kg
2. Folding unit - SelfControl - like new MBO B26E-2-66/4
Year 2014 - SN. 111183140403
Folding Type 4 Buckles
SelfControl
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Bi0h3aod7d
-On Stock Emskirchen / Nürnberg - Can be test-
offer consist of:
GUK fold unit
FA 52/4 - HT
- roller condition: 5%
- rollers refurbished: 1.536€
- 4 buckles
9jzkf8to
- installation: height manually adjustable
- usage: online and offline workable
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
x-travel 5420 / 5970 mm
stroke 1700 mm
Control SIN 840D
total power requirement 30,00 kW
weight of the machine ca. 8,00 t
dimensions of the machine ca. 12,00 x 2,00 x H6,00 m
Loading unit with control SIEMENS SINUMERIK 840D.
Bdndoi33c
Portal with four feeder-units (Z1, Z2, Z3, Z4)
Z1 and Z2: conveyor belt inlet interim storage
Z3 and Z4: interim storage machine
The unit was used for loading and unloading shaft parts
on a grinding machine.
cooling capacity: kW
drive power: kW
voltage: V
operating pressure: bar
volume: l
Vssrgi
motor capacity: kW
Number of ventilators: St.
voltage: 360-730 / 50 V / Hz
total power requirement: kw
weight of the machine ca.: 0,150 t
dimensions L x W x H: m
Air volume:140 m³/h
blower power:12 kW
total power requirement:13,1 kW
weight of the machine ca.:0,2 t
dimensions of the machine ca.:4 x 2 x 3 m
with GRP funnels
Dryers from Somos dry with dry air.
Year of manufacture 07/92 Power rating 13,1 KW Heating capacity 12 KW Drive power 1,1 KW
Equipment: 4 dryers with 140 l Volumen, 4 clutches
Bokqldv79m
Plant has run until recently without problems, has been cyclically maintained, has now been replaced by a larger system
Inert gas welding device, inert gas device, wire feed case, wire feed unit, wire feeder
Cibbygzw
-Wire feed unit: 4-roll wire feed
-Motor: type GDM 12 24/42 V
-Spare part from: Messer Griesheim EWN welding device
-Dimensions: 260/160 / H120 mm
-Weight: 4 kg
3. Folding unit - SelfControl MBO T92/444 - 56/4
Year 1986 - Serial-No. 20860601
Infeed width max. 560mm
4 buckles
SELFControl
-We would be very pleased with your visit - more machines on Stock-
-Available Immediatel
Bi0g8gyrj9
offer consist of:
Onpht
GUK fold unit
FA 52/4 Stat 2 HT
- roller Solid material condition: 50%
- rollers refurbished: 1.536€
- 4 buckles
- installation: height manually adjustable
- usage: online and offline workable
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
Clinch unit TOX - pneumatic hydraulic Toxpresse
Hydro-pneumatic press TOX Pressotechnik power package
Type STE 075-32-3/4 "- No. 209568-18
Nhdbn
Type CRS 03.62 - No. 207599.2
Built in approximately 2005
-Hydaulischer pressure switch
-mounted to the stand
-Enforcement add or clinching
-To the manufacture to treads a Formschlüssigen connection of 2 sheets without the panels or to heat up
Weight: 230 kg
Comes from a plant, sales without electric control
Atmos Servant 4
ENT workstation consisting of Atmos treatment unit, instrument cabinet, microscope and treatment chair with electric and manual height adjustment.
Device is used and can be viewed with pleasure.
Only pickup.
Opmgr
Solo folding unit with automatic control 400 V ~
Neul7fwn
4 buckle plates
Smallest fold up to 15 mm fold length
Roller table with running direction from right to left.
Suspended shingle delivery S350
Inert gas welding device, inert gas device, wire feed case, wire feed unit, wire feeder
Od3vt
-Wire feed unit: 4-roll wire feed
-Motor: Groschopp type PM1 85-40 48 V / 150 W.
-Gearbox: SG 80
-Dimensions: 340/300 / H160 mm
-Weight: 6.3 kg
2. Folding unit - SelfControl MBO T92/44 - 68/4
Eocbaslv8
Year 1986 - Serial-No. 20860601
Infeed width max. 680mm
4 buckles
SELFControl
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately
offer consist of:
GUK fold unit
FA 52/4 Stat 2 HT
- roller condition: 0%
- rollers refurbished: 1.536€
2saelm
- 4 buckles
- installation: height manually adjustable
- usage: online and offline workable
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
Power Unit with 135 KW,400/231 Volt 50 Hz.Tropic isolation.
Dsjemsp
MAN Diesel with 193Hp.1450 working hours in a very good condition.
ABG VECTRA SGRT 330-4 GLUELESS START TURRET REWIND MACHINE + TURNBAR , SLITTING UNIT
The machine is in very good condition, in production, can be inspected at any moment and available immediately.
Working hour : 10.662 hours
Servo driven rewind mandrels
Touch screen oparator interface
Oqlup
Programmable label applicator
Inter-label cutting
MODEL : 330 -4 SPINDLE IN-LINE TURRET REWINDER 2010
MAX. WEB WIDTH : SGRT 330 ( 13 ‘’ )
MAX. ROLL DIAMETER : 350 MM ( 13.75 ‘’ )
AIR MANDRELS : 42 MM ( 1...
- 4 motorized adjustable folding pockets 38cm infeed width
- Underfloor suction feeder with alignment
Bocof7en7e
- preset counter and double sheet control
- mobile height-adjustable motorized conveyor belt delivery
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
Uwbk3zjo
-HOMAG milling unit: for joint milling
-with heavy dovetail guide
-Milling unit: swiveling
-1x engines Perske
-Motor type: KNS 70.12/2.01
-Power: 3/4.4 kW
-Voltage: 220/380/380 volts
-Frequency: 50/100 Hz
-Speed: 2880/5880 rpm
...
Electronic control unit.
Bnhrcvy3dy
Unused
NORD bevel-helical gear units
SK9032.1AFB-100LH/4
+ Motor SK 100LH/4
693 Nm
2.20 kW
30 rpm
+ 100LH/4
Bkymjxh
unused / unused
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 95 kg
X545
KBA Rapida 72-4 L PHWA
Machine is reconditioned in september 2018
4 COLOR
Varnishing unit
Fully working condition, Without damages on cylinders and gears
Console with CIP 3
Okmu7
25 mios on counter from 2016 since now
Autoplate
Full autowash
Weko poweder sprayer
Sheet decurler
Baldwin
THE PRICE IS NEGOTIABLE
Item condition: very good, unused
Scope of delivery: With test report and accessories
Packing: Original packaging
Guarantee in months: 12
Bl9xntxg0c
Weight: 93 kg
Storage location: Rosenfeld
Storage place: 101A
One piece of used hydraulic power pack in good condition pgh 4 - 30
Tqp8yip
Make Rexroth
Pressure up to 350 bar, delivery volume approx. 47 ltr. min
Electric motor ABB, 30 KW
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG milling unit: for joint milling
-with heavy dovetail guide
-Milling unit: swiveling
S0yqv00fr
-1x engines Perske
-Motor type: KNS 70.12/2.01
-Power: 3/4.4 kW
-Voltage: 220/380/380 volts
-Frequency: 50/100 Hz
-Speed: 2880/5880 rpm ...
2. station
working width 40cm
Niuqksh2
4 buckle plates
noise hood
1. folding roller with segments for gluing
Cross strapping unit MOSCA consisting of:
- 1x Transverse strapping RO-TR500-4, Ma.-Nr. 58564
- 1x EP (90° pusher/corner pusher) Ma.-Nr. 58565
- 1x Transverse strapping RO-TR500-4 Ma.-Nr. 58566
Ilrnw2c7m
The system runs around the corner -ᐳ Have a look at the video linked
Peripheral equipment sold separately (conveyor belt, roller table)
All machines are our property, located at our storage
Item condition: Used from assembly line for commissioning
Case: Slight scratches, bearing marks
Guarantee in months: 12
Protection class (IP): 20
Temperature: 0 ... 40 °C
Input: U=3*380 ... 500V, 50 .... 60 Hz, I=8.64 A AC
Bhekwpp7um
Output: U= 3* 0V ... U Input, F= 0 ... 180 Hz, I 9.5 A AC
Weight: 4.852 kg
Storage location: Rosenfeld
Storage bin: P2A2_BS2
RYOBI 524 GE N+P UNIT
· Age 2008
· counter approx. 39mio.
· max. paper size 375x520 mm
· Alcohol dampening system
· N+P UNIT
· PCS CONTROL
· Semi-automatic plate change
· All washing devices
· Automatic blanket and ink roller wash unit
· Condition Good
· Still in production Yes
· Test possible Yes
· Complete and in working condition Yes
· Available Immediately
N3207
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine
-HOMAG milling unit: for format processing
S0yq9l9zs
-with heavy dovetail guide
-1x engines Perske
-Motor type: KNS 70.12-2DF
-Power: 3/4.4 kW
-Voltage: 220/380/380 volts
-Frequency: 50/100 Hz
-Speed: 2880/5880 rpm
-Other engines with ot...
AMTEC VERTIwrap weigher 4-cup dosing unit
Bjfvfme9s0
Volumetric dosing unit, 4 cups, perfect for free flowing granulate like products (rice, salt, sugar, etc.). - Specifications: stainless steel; dosing range: 80-2.000ml; max. speed of the machine in neutral: 60 cycles/minute.
Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition...
Temperating machine , Make Peter Huber Kältemaschinenbau gmbh, . 46329/01, Working pressure 17 Bar, Heating medium: R134a, With cooling , Temperature -10 - +40gr C, Motor 400V, 50 Hz, With temperature controller , Year of construction "unknown", Mounted on wheels , With switch , Floorspace 0,6x0,6 M, Total height 1,2 M, Weight 140 KG, Extra information max. 17 bar What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for...
Make Deltatherm (D), Type WP 412/15, Extra Specifications electrical power 12,8 kW , medium: Water, SN 7/8032, manuf. 2002 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Bn9ztr83nl
PUR spine glue unit, roller system, PUR melting unit
Ovg7k9g
