Used 4 Colors for sale (37,388)

Condition: ready for operation (used), Functionality: fully functional, Roland Matic S Computer Print C38 4 printing units 12 " water cooling unit 2 perforated units It is in good condition Available immediately Dpefax

Condition: used, Year of construction: 1997, approx. 107 million prints 370×520 mm (14×20″) CPC-104 CP-Tronic Alcolor Autoplate Streamfeeder Autom. Ink roller-, blanket and impressioncylinder wash-up device Perfecting 2/2, Iswbw0Y Low-pile delivery Plusversion Powder sprayer Available: at short term

Condition: used, Year of construction: 1981, Size: 660 x 483 mm Equipments: Overall dimensions L 7000mm Overall dimensions W 2250 mm SHINOHARA Type 66 IV K, size 660x483; with dryer, alcohol dampening with cooler and OS-66-II control panel Electrical connection 400 V some printing cylinders were repaired Cwxlp2F7Yg

Condition: used, Year of construction: 1992, Size: 360 x 520 mm Impression: 57 Mio. Equipments: good condition alcolor, Baldwin Machine number 705982 Straight machine plus version Dpebdd

Condition: new, Year of construction: 2024, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Esoyhun3E Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models basic on buttons or HMI program controls

Condition: used, Cam-operated rotary indexing table EXPERT type E 19/0030/4 Machine. # 4806 with 4 stations, Advantage: The 4 stations are approached precisely and smoothly. The division cannot be changed. be changed. You can run the table all around, but it always stops briefly at the always stops briefly at the 4 stations, 2Drn37D7G Technical data: Turntable diameter 1350 mm Table height 820 mm Inner bore 90 mm max. load 1 t outer diameter 1500 mm with - with ball bearing slewing ring - Index drive - without motor used The table was previously integrated into a welding carousel. Currently SPECIAL PRICE !!!

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Total length: 1,310 mm, Total width: 390 mm, Total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Uauobn3Kvz Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2023, Functionality: fully functional, Travel distance X-axis: 3,260 mm, Travel distance Y-axis: 1,630 mm, Travel distance Z-axis: 225 mm, Rapid traverse X-axis: 25,000 mm/min, Rapid traverse Y-axis: 25,000 mm/min, Rapid traverse Z-axis: 15,000 mm/min, Spindle speed (min.): 1,000 rpm, Spindle speed (max.): 24,000 rpm, Spindle motor power: 10,000 W, Tool mount: 110 mm, Tool length: 153 mm, Tool diameter: 100 mm, Input voltage: 400 V, Type of input current: three-phase, Power: 10 kW (13.60 HP), Equipment: Documentation/Manual, Rotational Speed Infinitely Variable, I am selling a new Format 4 profit H08, still in its original transport packaging. During the delivery period, I bought another Format4 CNC that was immediately available to me, which is why this machine is now superfluous. It is a good deal cheaper than from Felder itself, although you have no disadvantage by buying it, while it is available for immediate delivery/collection/inspection. The machine has a 10kW HSK F63 milling spindle, a vacuum system with 280m3/h nominal capacity, tool changer with 8 positions, 1x VHW spiral roughing cutter D8, 1x reversible face milling cutter D80. Further tools are negotiable. Installation by a Felder technician is included in the purchase. Also included in the price is a 3-day training course by Felder Lohmar on the software used for the machine. Warranty by FELDER is given. Price is net. Almost 70k net was paid. Gxcchkq

Condition: used, Year of construction: 2014, Used machine Hpxtgozo Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: used, Year of construction: 2018, Length of sliding table: 2.800 mm Cutting width: 1.720 mm Cutting height max: 202 mm Saw blade diameter max: 550 mm Cutting height with scoring saw: 127 Scoring aggregate: Yes Rotation speed steps: 3 Main motor power: 5,5 kW Controlled axes: Yes Number of controlled axes: 2 Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Scoring saw height adjustment: manually Scoring saw width adjustment: manually Scoring saw cutting width: Spacer discs FELDER X-Roll: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 7,35 kW Space requirement Length: 7,455 m Uad7Bw2Zej Space requirement Width: 5,154 m

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions B2Ygkqd0Ac THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: new, 1 Tennant 443C-4 scrubber dryer, pallet goods - Brand: Tennant - Professional floor cleaning machine - Model: 443C-4 - Class 1 - IPX4 - 1275W - 220-240V - 50Hz, 1 Ph - Item no.: GH_KNA22312-xx - Condition: new T90Wyfzabr

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Total length: 1,280 mm, Total width: 390 mm, Total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm Gxcwwna - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2014, Condition: excellent (used), -Dim:1385x2790x2430mm -Dim dalle:840x2140mm -N°série:1405116/BN/0010 -Temperature:300°C -Electronic control -Year:2014 -4 vents -4 stages -Voltage:400V -Power:43.5kw -Weight:2900kg High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface area in all three flue channels for rapid temperature recovery after loading -Flue lining entirely in refractory material for improved temperature retention and heat resistance STEAM Dpo0Id -Steam generator for each stage Steam generators located inside the cooking stage on the right-hand side -Water solenoid valve unit located on the oven roof -STEAM EXHAUST -Steam evacuation for each cooking stage -Hood with steam exhaust fan 1-speed steam extractor -Manual steam discharge valves ELECTRICAL INSTALLATION -Controls on left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per floor positioned in the mouth, easily replaceable -Safety thermostat

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, Machine/vehicle number: 200.12.010.13, Year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit Ccbtzxg 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit

Condition: used, Year of construction: 2021, Working dimension X: 3.000 mm Working dimension Y: 1.500 mm Working dimension Z: 150 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 12 kW Cxmgkkacx8 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 17 Linear tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 12 FORMAT 4 DH 18 6H 1S: Yes Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: Moving gantry machine Machine table: Pod and rail table Workpiece support aids: Yes Number of consoles: 6 Three stop ranges: Yes Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Light barrier Interface for .dxf data: Yes Automatic central lubrication: Yes Handheld terminal: Yes Enclosed drag chain: Yes Control: FORMAT 4 F4 INTEGRATE Software: FORMAT 4 F4 CREATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 OPERATE Conformity marking: CE mark Total connection: 18 kW

Condition: excellent (used), Year of construction: 2021, For sale is a used Format 4 thicknessing machine with a maximum throughput of 300 mm. The machine has been checked by our specialist staff and is in very good condition. (Fully functional) - 4 system cutterblock - planing width 630 mm Hu3Mahg - max. passage 300 mm - infinitely variable feed gear - electric height adjustment PowerDrive - suction Ø 160 mm - steel pull-out roller - 2 adjustable under table rollers - Engine power 15 kW / 20.4 HP/S6 - Year of construction 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: thicknessing machine, planer, thicknessing Reference: R-N2174

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Bhdwvxp7Zg Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Year of construction: 2014, Condition: excellent (used), -Model: ET 94/SC -Series number:SN006968 -Year of manufacture:2014 -No. of floors: 4 Dpoy77 -No. of doors: 1 -Interior dimensions (WxD): 920x1300 mm -Oven dimensions (WxDxH): 1440x2010x2720 mm -Oven + extractor height: 2300 + 420 mm -Total oven length with integrated elevator: 3870 mm -Loading space with integrated elevator (E): 1860 mm + 370 mm -Baking surface: 4.80 m2 -Power: 20.04 Kw -Voltage: 400 V - 50 Hz -Weight: 2000 Kg

Condition: used, Year of construction: 2022, Special equipment: Suitable for nesting Edgeband thickness max: 6 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Feedrate max: 10 m/min Dpovdn Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes FORMAT 4 TEMPORA F600 60.06L GB: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Air cushion table on edgebanders: Yes Control: FORMAT 4 X-MOTION-PLUS Conformity marking: CE mark, UKCA-Zeichen Total connection: 15 kW

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. Ibkj8N9 The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Year of construction: 2007, Condition: excellent (used), -Dim: 1620x2225x2300mm -N°series:12026399 -Dim dalles:801x1840mm -Year:2007 -5.9m² cooking surface -Max. temperature: 300°C -N°P:6775995 -Integrated elevator Corhckrajq -Voltage:400V -Power:27kw -Weight:1590kg

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm Bfvqg039Uj - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), -Dim: 641x987x1535mm -Flavors:1 ice cream and 4 milkshakes -Ice cream:56.8L/H -Milkshake:113L/H -Ice cream cylinder:3.2L -Milkshake cylinder:6.6L Bn0Qtyhhueg Bn0qtyhhueg -Vats:2x18.9L -Power:7,7kw -Voltage:380V -Weight:370Kg

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level. Bfr8Aplf7D