Used Abrollen Frame for sale (7,717)

Condition: good (used), Remark: One deep web frame is designed for transverse storage of 2 Euro pallets, 2 skeleton containers or alternatively 2 IBC containers. Technical data of the deep storage frame : Manufacturer: SSI Schäfer Design: Crosswise storage Dodpfx Ajpr T Unel Noch Included in delivery: 01x depth bar frame, used material color: sendzimir galvanized for rack depth: 950 mm clear span: approx. 850 mm cross beam support: approx. 50 mm total width: approx. 2.680 mm bay division inside: approx. 1.295 x 950 mm Cross-connector: L: approx. 2,680 x 50 x 1.50 mm (LxDxH) Support angle: L: approx. 950 x 150 x 50 x 3.00 mm (LxDxH) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), We offer you here a used pass-through frame of the manufacturer Bito to the purchase. Included in delivery are: 01x pass-through frame, used Manufacturer: Bito material color frame: similar cream white/ sendzimir galvanized material colour rollers: anthracite segment length: approx. 2.700 mm Segment depth: approx. 1,350 mm track spacing: approx. 175 mm roller width: approx. 25 mm pitch: approx. 26 mm Diameter of rollers: approx. 25 mm Material rollers: plastic Bars per continuous frame: 16 pcs. Dcsdpfx Ajg Nt Uzel Nsh

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Dcedpfx Aoyywl Rjl Neh Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Dcedeyywi Aspfx Al Nsh Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Dcsdpfxjxwn Rve Al Njh

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Dcedpfxsxw Ubne Al Nsh

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Dcodpfexw Uf Tex Al Noh

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Dedpjip Uf Uefx Al Njch Also for other Esterer creel types stilts and spare parts available.

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Dsdpfxjuql Ils Al Nsch Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement.

Condition: used, NICO DUIN frame press Dcsdeytc Snjpfx Al Noh

Condition: good (used), machine/vehicle number: 2824, Year of construction: 2011, total length: 6,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 20" from Uniktruck Dcedpfx Aleyuhvzs Nsh

Condition: good (used), machine/vehicle number: 2823, Year of construction: 2011, total length: 12,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 40" from Uniktruck Dcjdoyuhvuepfx Al Nsh

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Djdpfod Rzc Rex Al Nech

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Dodpfx Aodzqmzol Njch Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar Dcjdsh U Dtuspfx Al Neh 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm Djdpfxoh Uhqye Al Njch table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system Dcedpfx Ajhrakvjl Njh - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material Dcsdpfx Alsfgpfpo Noh - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania) Dsdpeuctlnsfx Al Nsch

Condition: used, In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania) Dcedpfx Asq Tn Nujl Njh

Year of construction: 2019, condition: used, Used transport frame MMW LIMITED Model ST2201-5-3 Djdpfjy Nkklsx Al Nsch Max 5400kg 'A'-frame for windows MMW Ltd ST2201-5-3, SWL-5300kg

Year of construction: 2021, condition: used, Used metal frame for product transport. Dedpfx Aloy Nkhqj Noch Available: 199 pcs. Max load: 1000 kg

Year of construction: 2019, condition: used, Used metal frame for the transportation of products. Dcodpfx Ajy Ni R Rel Neh Available: 302 units. Max load: 2000 kg

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Djdpfxeyxgr Re Al Nech

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 570 mm, adjustable Djdev U Tkgopfx Al Nech -Number: 11 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H570 mm -Weight: 12 kg/piece