Used Abrollen Frame for sale (7,866)

Condition: good (used), machine/vehicle number: 2823, Year of construction: 2011, total length: 12,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 40" from Uniktruck Hedpoyuhvujfx Aaaok

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Hjdpfx Aaowkba Hjaok Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Hedpfx Aaow I Uy Tsask Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Pneumatic punching unit TÜNKERS or DE-STA-CO, pneumatic power cylinder Pneumatic punching frame, punching frame, punching unit, punching frame Hodpfx Aaexf Uqxeask Year of manufacture: 2019 Model No. 141-1040F Punching frame No. B-13-26/100 Punching force: 4 tons (40 kN at 8 bar) Air connection max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outside): Ø 22 mm - Stripper with Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg very good condition

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Hsdowbp Nwepfx Aaajk Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Hodpfx Aefi Tg Hjaaok Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Hsdjd Rzc Rjpfx Aaaok

Condition: used, Year of construction: 1982, functionality: unexamined, Working area approx. 3500 x 2400 mm 3 vertical cylinders 3 horizontal cylinders Hsdpfjyyb Aaex Aaajk

Condition: reconditioned (used), functionality: fully functional, Hydraulic sharpening machine for frame saws. Grinding wheel diameter 250 mm. 4 built-in, switchable tooth profiles. 3 feed speeds. Hjdpfx Aaoyvtqneajk

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m Hjdpfx Aaoyuylneask – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure Hsdpfx Aswg Hr Teaajk cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: good (used), Electro-hydraulic frame press Manufacturer: Hess Model: Hydro Nummer 1 1.1 kW Press dimensions: max. 3550 x 2550 mm The machine is in good condition. Hsdpfxjyux Uuo Aaajk

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Hjdpfxodzqmzj Aaaok Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Hsdpfx Aash U Dtuoajk Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz Hjdeh Uhqyjpfx Aaajk - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Hsdjhrakvepfx Aaaek Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Hjdpfx Asv Uraasaaok Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Hjdefgpfpspfx Aaask Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement Hsdpegbpuhjfx Aaaok - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Hjdoxmr Rxjpfx Aaaek Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Hodjyhzhhepfx Aaaek Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: - Electro-hydraulic - Automatic final pressure release and follow-up switching for constant pressure maintenance - Central pressure beam with quick-adjustment cylinder, pressure cylinder, and abutment - Additional horizontal pressure cylinder - Press area approx. 3000 x 2250 mm - External dimensions 4000 x 2750 x 850 mm Hjdsyq T Hwepfx Aaask - Equipped with 3 horizontal pressure cylinders - Equipped with 2 vertical pressure cylinders - Cylinder stroke 150 mm - Pressure force per cylinder: 2000 kp at 100 bar - Working pump pressure capacity: 100 bar - Support and pressure plate depth: 100 mm - Electric connection: 1.5 kW Availability: short-term Location: 63934 Röllbach

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Hjdpfx Aaexrnvbeajk Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine Hedeykkx Depfx Aaaek • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Hodpfx Ajhqmghsaask Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL