Used Adhesive for sale (643)

Condition: excellent (used), For sale here is a cardboard folder and cardboard glue The still open cartons are folded by running into the carton glue above and then glued. There is a second dispenser so that the cardboard can also be glued below. Ijdpsi Dnyajfx Ag Noih I look forward to your questions.

Condition: like new (used), Year of construction: 2018, operating hours: 883 h, functionality: fully functional, machine/vehicle number: LU18C16096, overall weight: 300 kg, type of input current: three-phase, total width: 80 mm, total length: 120 mm, total height: 156 mm, input voltage: 380 V, VB025-4CCXX4/XXXXXCXXXXX Hot melt adhesive melter: - Pumps - 2 pcs type SN0062 – 2.9 kg/h; - Tank capacity – 23.8 kg; - Temperature sensor - Ni120; - Operating temperature – 40 ÷ 230 C; - Power supply – 400V/3ph; - Outlets for 4 hoses; - Possibility to add additional pumps to the container (up to 2 more pcs.); - Wheels. Iiedpfx Aovzzwhsg Nsh HOSE,BLUE SERIES,5/16 X 24 FT,240V,AUTO Hot melt adhesive application hose - 2 pcs. - Length – 7.4 m; - RTD temperature sensor; - Heater power – 760W.

Year of construction: 2001, condition: like new (used), Etipack Model: SIST.1 FLEXO (EMC DX head) Direction:Left-Right Type: Labeller for self-adhesive labels Serial: A1A357R1-1 Build: 2001 Dimensions: L x W x H = 2,600 x 1,400 x 1,250 mm conveyor length 2,600 mm Coveyor wide 110 mm (Welt) Press on belt 90 mm high Weight: 400 Kg Electric 230 Volt - 50 Hz - 200 Watt Features: Machine suitable for round and conic wraparround machine technicly checked Iiedefzknvjpfx Ag Njh conveyor frequency driven

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging Ijdexm T Hnjpfx Ag Nsih - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 320 kg, CMC ITALIA COVERMAKER Model: LPS (50 x 70) Semi-automatic case maker for the production of book covers. Hot glue mounting for board and packaging It will also work with cold adhesive. Cover papers: 100 - 170 gsm Cover boards: 1.5mm - 4.0mm Power requirements: 400 volt - 2kw - 50Hz Weight: 320 kgs Year of construction: 2005 Fully working order. Specification: Min size: 12mm x 15mm Max. size turned edge: 50 x 70mm Max. size edge-to-edge: 52 x 74mm Minimum Height of Case 105 mm Isdpfeu Ivx Dox Ag Noih Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm – 4mm Electrical requirement: 400/440v - 2.0 Kw - 3 phase + neutral External air supply requires: 6 bar pressure Dimensions: length 3100mm (including delivery tray), Height 1200mm (including storage shelf), Width 1050mm.

Condition: excellent (used), Year of construction: 2019, operating hours: 613 h, functionality: fully functional, machine/vehicle number: AH00001133, feed rate X-axis: 18 m/min, power of the buffing unit: 260 W, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 1,500 W, overall weight: 1,746 kg, type of input current: AC, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 415 V, power: 20 kW (27.19 HP), input current: 48 A, input frequency: 50 Hz, Manufacturer: SCM Model: Olimpic K560R Year:2019 Condition: Excellent. Lightly used and currently used in manufacturing Availability: End Oct 2025 Location: Northern Ireland Financial Information: VAT: This will be charged to UK companies only Duty: There is no customs or duty selling into the EU from Northern Ireland Price: This is as seen and does not include preparing the machine for transport Machine Specification: If you want to run Airtec (Airfusion) PU and EVA then this is the machine for you. This is a fully specified K560 with many extras. Everything you need to put it into production quickly is included. Please read the full description. Iijdpfx Asw Nyqasg Neh Track Speed 12-18mm Panel Thickness 8-60mm Max Edge thickness Strips 6mm Max Edge Thickness Coil 3mm Coil plate diameter 780mm Distance between two panels 600mm Min Panel Length 140mm Min Panel Width 100mm Work height 900mm Machine length: approx. 4950 mm Autoset: Automates the machine set up when changing work (e.g. changing from 1st to 2nd passage) Pre-Milling: 2 off high freq motors Max removal 3mm Infra-red Ceramic Lamps: The heat the panels before gluing AAR anti-adhesive unit: Prevents adhesive sticking to the upper and lower panel surfaces SGP - Special Glue Pot: Machine configured for BOTH EVA and PU glue Airfusion +E unit: Hot air application of pre-coated edge band to avoid the use of glue K/SEL end trim unit: 2 high freq motors 0-15 deg adjustment of cutting angle RK trimming unit: 2 high frequency motors ROUND X Rounding unit: Twin high frequency motor corner rounding RAS/K edge scraping unit: For rounded edge scraping post machining RCV glue scraping unit: Top and bottom scraping to remove excess edge band and glue SPV brushing unit with spray: removes glue and polishes edging and boar Spray mist device for delicate edges: Allowing the processing of high gloss edging StarTouch electronic control: Touch sensitive control panel Extras included in the price: Leitz pre-milling tooling blocks – Brand new – never used Ducting – The ducting to connect to the extraction Ostermann edge band cassette – For quick change of the edging Pens and wax cabinet on wheels – For any repair needs Electrical cables and switchgear – Allows you to connect up the machine on delivery Optional extras: Extraction system to suit €4000 Compressors to suit €4500 each

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Iodpexaa Nvofx Ag Noih The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  Capacity: Up to 2,000 bph (operated between 500–1,000 bph) Filling System: Isobaric, counter-pressure Filling Valves: 5 Bottle Formats: 0.33 L and 0.75 L (adjustable) Can Formats: Standard 0.33 L Closure Systems: Integrated can seamer and crown capper Construction: Stainless steel Working Pressure: up to 3 bar CO₂ System: Pre-evacuation for cans, vacuum for bottles Controls: Touchscreen with adjustable parameters Mobility: On wheels with adjustable legs Condition: In use, regularly maintained Scope of Delivery  Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking   Iedoxn Uf Iopfx Ag Njih

Condition: good (used), Year of construction: 2022, functionality: fully functional, Single-sided edge banding machine for applying edge banding tape with hot-melt adhesive to all four sides of a rectangular panel, including the finishing of the edge tape. TECHNICAL SPECIFICATIONS: Iiodsxpgxvopfx Ag Neh • Feed speed: 7 m/min • Panel thickness: 8 – 50 mm • Edge band thickness (strips): 0.4 – 3 mm (optionally 5 mm) • Edge band thickness (roll, incl. covers): 0.4 – 3 mm • Max. cross-section of edge material for trimming: 150 mm² • Roller holder diameter: 700 mm • Max. projection of edge band relative to the panel: 4 (2+2) mm • Min. distance between two panels: 600 mm • Min. panel length (minimum width 100 mm) with edge tape on roll: 160 mm; with edge material in strips: 180 mm • Min. length of edge tape on roll: 200 mm • Min. length of edge material in strips: 220 mm • Min. panel width with edge tape on roll: 110 mm (min. length 210 mm) • Working height: 900 mm • Width for fixed panel support: 615 mm

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. Ijdpfx Agow U A Ils Nsih - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Year of construction: 2025, condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. Iiodpfx Aec Umftjg Neh -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: used, This listing is for the Sartorius YDP30 Thermo Direct Printer The unit is in full working condition and is ready for immediate use Overview & Compatibility Designed to work seamlessly with Sartorius laboratory balances (Practum®, Quintix®, Secura®, MA37, MA160) — it auto-detects the printer and guides users through GLP-compliant print protocols for traceability and accuracy Supports both direct thermal printing (where the paper darkens directly) and thermal transfer printing (which uses a ribbon for more durable, fade-resistant printouts) Certified Scale Iisdpsxhfy Nefx Ag Noh Print Capabilities Resolution: 203 dpi for clear text and barcodes Scales Galore Max print width: 54 mm (2.13") — fits both standard A4-style lab reports and narrow self-adhesive labels Label options: On-demand printing of standard paper, continuous rolls, or adhesive labels using compatible ribbons

Condition: good (used), mileage: 29,900 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 09/2023, emission class: euro6, color: light grey, driver cabin: day cab, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, fog lights, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Passenger bench - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver's airbag - Remote central locking - Cruise control - Height-adjustable steering wheel - LED daytime running lights - Front center armrest - Fog lights - Reversing camera - Side sliding door - Ignition interrupter - Advertising (adhesive) - Two rear doors - Partition wall - Partition wall without windows = Additional Information = General Information Number of doors: 5 Cabin: Single License plate: VXS-56-N Iiodpfx Ajuy Txrsg Nsh Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: 6-speed, manual Front axle: Max. axle load: 1,850 kg; Steered Maximum rear axle load: 2100 kg Dimensions Length/Height: L4H3 Dimensions (L x W x H): 555 x 207 x 248 cm Weight Curb weight: 1,956 kg Payload: 1,544 kg GVW: 3,500 kg Interior Interior: gray Maintenance General technical inspection (AIT): inspected until September 2026 Condition Technical condition: good Visual condition: good Number of keys: 2 (2 remote controls)

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainless steel frame, enclosed safety housing Control system: Micro PLC with touch-screen for speed, production, and fault management Key features: Cold-glue labelling head with oil-bath lubricated mechanisms Central carousel with centering bases for precise bottle positioning Pneumatic heated pump for adhesive circulation and return system Automatic bottle synchronization with infeed screw to prevent breakages Micrometric glue adjustment to reduce film thickness and ensure clean labelling Bottle retainers for smooth handling and reduced congestion Gear-driven transmission with clutch and emergency stop system Compact, fully enclosed design for hygiene and safety   Iisdpsxl Di Defx Ag Noh

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Iijdpfxexn Hzbo Ag Nsh Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: used, mileage: 54,940 km, power: 162 kW (220.26 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 08/2019, loading space length: 3,790 mm, loading space width: 2,355 mm, loading space height: 400 mm, loading space volume: 4 m³, emission class: euro6, color: white, number of seats: 3, total length: 6,550 mm, total width: 2,440 mm, total height: 2,900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Meiller 3-way tipper body, HIAB rear crane type: 055 BS-2 HIDUO, articulated boom, double hydraulic outriggers – extendable and stabilizable, grab control, radio remote control, operation possible from both sides of the vehicle (left & right), 2-stage hydraulically extendable, load chart: approx. 2.1m – 2440kg, 3.6m – 1400kg, 5.1m – 960kg, 6.9m – 700kg. Technical option: crane with 1 mechanical extension can reach up to 8.9m – 500kg. Hydraulic connection for trailer, stability control assistant, lane departure warning, ABS, rear axle differential lock, engine brake with constant throttle, cruise control, air conditioning, navigation system, reversing camera / pre-installed wiring, multifunction steering wheel, heated windscreen, driver comfort air-suspension seat, middle seat, externally heated and electrically adjustable mirrors, electric windows (driver and passenger), rear window, 2 flashing beacons, leaf suspension. The vehicle may have adhesive advertising or lettering. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be wrapped or lettered for advertising purposes. Our general terms and conditions of delivery and payment apply. Iisdpfx Agoxlw Nwj Neh We are happy to provide you with a financing or leasing proposal for this vehicle. Please contact us!

Condition: new, Year of construction: 2025, The Hebrock F 2 Ijdpfxsi Am U Ds Ag Nsih The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: good (used), mileage: 242,500 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 01/2020, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, immobilizer system, power assisted steering, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Passenger bench - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - Euro 6 - Driver's airbag Iedpfx Agsuu Exro Nsih - Remote central locking - Cruise control - Height-adjustable driver's seat - LED daytime running lights - Front center armrest - Ignition interrupter - Advertising (adhesive) - Partition with window = Additional Information = General Information Number of doors: 2 Cabin: Single License plate: VPK-05-V Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: RENAULT, 6-speed, manual Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Dimensions Dimensions (L x W): 669 x 221 cm Weights Curb weight: 2,440 kg Payload: 1,060 kg GVW: 3,500 kg Functional Tail lift: D'HOLLANDIA, tailgate, 750 kg Consumption Average fuel consumption: 7.3 l/100 km Urban fuel consumption: 7.1 l/100 km Extra-urban fuel consumption: 7.4 l/100 km Maintenance, history, and condition General technical inspection (AMO): inspected until January 2026 Technical condition: good Visual condition: good

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Iisdpfslht Hzex Ag Noh Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: good (used), mileage: 182,800 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 12/2019, loading space length: 42,000 mm, loading space width: 21,300 mm, loading space height: 22,500 mm, emission class: euro6, color: white, driver cabin: day cab, Year of construction: 2019, Equipment: ABS, immobilizer system, power assisted steering, spoiler, tail-lift, = Additional Options and Accessories = - Passenger bench - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver's airbag - Wooden loading platform - Height-adjustable driver's seat - Front center armrest - Radio/CD player - Ignition interrupter - Advertising (adhesive) - Central locking - Partition with window = Additional Information = General Information Cabin: Single License plate: VJS-63-X Technical Information Number of cylinders: 4 Iisdpfou Dxm Aox Ag Njh Engine displacement: 2,299 cc Transmission: 6-speed, manual Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Dimensions Width: 230 cm Weights Unladen weight: 2,477 kg Payload: 1,023 kg GVW: 3,500 kg Functional Tail lift: D'HOLLANDIA DHLM08, tailgate, 750 kg Maintenance, history, and condition General technical inspection (AMO): inspected until December 2025 Technical condition: good Visual condition: good

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels Iodpfxohqadce Ag Njih For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: good (used), mileage: 360,100 km, power: 330 kW (448.67 HP), first registration: 07/2022, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 3,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, traction control, = Additional Options and Equipment = - Adaptive Cruise Control - Automatic Dipped Headlights - Passenger Seat - Electric Windows - Electrically Adjustable Exterior Mirrors - Euro 6 Emissions Standard - Remote Central Locking - Cruise Control - Height-Adjustable Steering Wheel - Air Conditioning - Refrigerator - LED Daytime Running Lights - Leather Steering Wheel - Air Suspension - Air Horn - Fog Lights - Radio with MP3 Support - Rain Sensor - Sleeper Cab - Sun Visor - Auxiliary Heater - Advertising (adhesive decals) = Further Information = Technical Details Number of Cylinders: 6 Engine Displacement: 12,777 cc AdBlue System: Yes Transmission: 12-speed, Automatic Front axle: Max. axle load: 7,500 kg; Steered Rear axle: Twin wheels; Differential lock; Max. axle load: 11,500 kg Dimensions Dimensions (L x W): 599 x 253 cm Weights Unladen Weight: 7,939 kg Payload: 12,561 kg Gross Vehicle Weight (GVW): 20,500 kg Iisdpfjxm Urxox Ag Neh Maintenance, History, and Condition APK (General Technical Inspection): valid until 07/2026 Technical Condition: good Optical Condition: good Identification Registration number: 77-BTD-9

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Iodju I R Utepfx Ag Njih Location: in stock at 54634 Bitburg - Available immediately -

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h Iiodpfx Asdvltyjg Noh The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge Isdpei Am Ukjfx Ag Nsih 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -