Used Adhesive for sale (592)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: Iaedpfxew Ryt Ds Addel - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition Iaedpfx Adjum Hufjdsl * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: Iajdpfx Ajvphzieddol 40 nozzles for consistent adhesive application

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Iodpfx Aoxy Tm Ijddeal

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Iedpfxox Ux U As Addjal Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 Iajdpswigbmsfx Addel For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h Iaodpfx Aox Tifijddel - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Isdpfowka N Tex Addsal Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, The Eigenbau (Self-build) Perfect binder with PUR is a specialized binding machine designed for precise and efficient bookbinding. This machine is manufactured by Eigenbau and features a perfect binding mechanism with PUR (Polyurethane Reactive) adhesive, ensuring durable and high-quality binding. The machine has a format of 100 mm and is currently available in stock. It is located in Germany, and the price is available upon request. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Iaodpfxovfx Rte Addol Key features of the Eigenbau Perfect binder include a centering function for accurate alignment, a heating roller for optimal adhesive application, and a miniature circular saw for precise cutting. Additionally, it comes with a paper unwinding mechanism and a PLC (Programmable Logic Controller) for automated control. There is also an optional INATEC BS 25002 PUR system available for an additional 1500 EUR, which can enhance the binding process. The machine is equipped with an input station that includes a plate lifting station for efficient material handling. Format: 100 mm Equipment: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) input station with plate lifting station

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids Isdpfx Adewmc I Djdjal finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi Isdowqx H Repfx Addsal • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: used, total length: 1,750 mm, total width: 800 mm, total height: 1,000 mm, overall weight: 60 kg, space requirement height: 1,000 mm, space requirement length: 1,750 mm, space requirement width: 800 mm, No. 3253 Edge banding machine Sudhoff V 30 Used For with hot melt adhesive pre-coated edges made of PVC, ABS, melamine or wood Workpiece thickness 10 - 55 mm Edge thickness 0.4 - 1.0 mm Automatic edge transport Automatic cutting of the rear edges Edge trimming for flush cutting Electromagnetic cutting station for the front edge Hot air blower with 3 kW power Heating infinitely variable Automatic belt feed 7 m/min Transport dimensions approx. 1750 x 800 x 1000 mm LWH Weight approx. 60 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Iaodpfx Adjx Il Ayedel Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis Iodpfxex E N Nfs Addsal F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m / min Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine Iodjw I Ur Nepfx Addjal The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Iodevfx A Aopfx Addeal Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,000 mm, total height: 4 mm, warranty duration: 12 months, PROFESSIONAL TECHNICAL BLACK FELT for manual and automatic glass cutting tables We offer high-quality technical black felt designed for covering the tops of glass cutting tables – both manual and automatic. The felt provides effective protection for glass sheets, ensures stable material handling, and maintains high durability even during intensive, everyday use. The product is used by leading manufacturers of machinery for the glass industry. Applications: - Manual glass cutting tables - Automatic and semi-automatic tables - Assembly and workstations Key features: Ijdpfx Aox Rp U Soddoal - Deep, intense black color - High density and excellent abrasion resistance - Stable structure and uniform surface - Suitable for industrial use - Proven in professional glass processing plants Technical specifications: - Roll width: 200 cm - Thickness: 4 mm - Chemically hardened on one side - Sold by the running meter - Mounting: contact adhesive Why choose our product: - A solution dedicated for professionals - Enhances quality and workplace safety - Extends the service life of table surfaces - Product ready for immediate application

Condition: used, maximum load weight: 2,900 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 08/2025, loading space length: 6,100 mm, loading space width: 2,100 mm, loading space height: 50 mm, total width: 2,100 mm, total height: 50 mm, Now chat via WhatsApp: Quickly & easily get in touch with our sales advisor. Internal ID number: [2752] Vehicle Highlights: SUPER STABLE - SUPERIOR DESIGN - FAST LOADING of VEHICLES • Curb weight: ONLY 600 kg (gross 3,500 kg) • Payload: 2,900 kg (+600 kg trailer) • Overall dimensions: 7705 x 2110 x 600 mm • Loading area length: 6055 x 2110 x 600 mm • Platform height from ground: 600 mm • Number of axles: 3 x ALKO (1350 = 4050 kg) • Permissible total weight: 3,500 kg • Loading area length: 6,055 mm • Loading area width: 2,110 mm • Loading ramps: length 2,500 mm • 100 km/h approval for Germany • Wiring: 13-pin + LED lighting • R10 alloy wheels preferred • Stainless steel frame anchor points • 1x spare wheel • 1x jockey wheel • COC Certificate • 6x AL-KO axle shock absorbers 1350 KG • Side compartments for wheel chocks • 2x red wheel chocks • AKS AL-KO safety coupling 3.5 t • 6x R10 alloy wheels • Self-adhesive black side decals • Winch • Starbooster included ----Interested in leasing or financing? We offer attractive deals – also available with no down payment! Please contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm, Sat: 9:00 am – 2:00 pm Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, misprints, and prior sale excepted. The contractual condition of the vehicle is determined exclusively by the purchase contract on site or through written confirmations. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers. Isdpfx Adsw Ik I Hodoal

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° Iaedpfsx D I D Aex Addol This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Application Types Edge Banding

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Separate control for main drive and film transport. Siemens S7 control system. Siemens touch display. Photoelectric control of film transport. Cross and longitudinal heat sealing. Film adhesive table. Side folding unit. The machine is now equipped with the latest Siemens S7 control system! See video: youtube: VP220 packaging machine, shorts Isdevk Rv Sjpfx Addeal

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Iajdsx Dmdhjpfx Addol Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: excellent (used), functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 1,900 mm, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 3,200 kg, height adjustment type: electric, table width: 1,300 mm, input voltage: 400 V, transport length: 2,100 mm, transport height: 2,200 mm, transport width: 2,000 mm, A high-performance wide belt sanding machine designed for processing wood-based panels, solid wood, plastics and metal. Suitable for both rough sanding and final finishing, ensuring excellent surface quality and stable, repeatable results. The machine is equipped with two independently controlled sanding belt units, allowing the use of two different grit sizes at the same time. Each belt has individual speed control, which prevents surface scratches, overheating and clogging of the abrasive paper. The conveyor belt table, combined with precise height adjustment, enables sanding of materials up to 100 mm thick. Thickness adjustment is controlled via a digital control panel, ensuring accuracy and ease of operation. Isdpsmrqlnofx Addoal Each sanding drum features independent speed control via frequency inverters and belt position sensors. These systems prevent belt misalignment and automatically stop the machine if improper belt tracking is detected, protecting both the machine and the workpiece. The sander includes a central dust extraction system, ready to be connected to industrial dust collectors or vacuum systems via Ø100 mm outlets. In addition, each sanding belt is equipped with a pneumatic belt cleaning system, continuously removing dust during operation. Abrasive belt replacement is quick and easy – a single clamp release allows the belt to be removed from the machine. The sander is compatible with standard abrasive papers available on the market, joined with adhesive tape. No special or proprietary abrasives are required. KEY FEATURES • working width: 1300 mm • two independently controlled sanding belt units • possibility to use two different grit sizes simultaneously • variable speed control for each belt (frequency inverters) • sanding capacity up to 100 mm material thickness • conveyor belt table with height adjustment • digital control panel • pneumatic belt tensioning system • pneumatic belt cleaning system • dust extraction outlets Ø100 mm • fast and easy belt replacement • semi-automatic operation The machine is in perfect condition. It was used for short-term demonstration purposes.

Condition: used, Year of construction: 2023, functionality: fully functional, The iEcho MCT is a compact Rotary Die Cutter designed for short-run, multiple-repeat production. It is primarily used in the digital printing, packaging, and labeling industries to process sheets of adhesive stickers, wine labels, hang tags, and playing cards. Unlike large industrial flatbed cutters, the MCT uses a magnetic rotary cylinder to cut materials at high speeds while maintaining a very small physical footprint (approximately 2m²). Rotary Die Cutting Technology: Uses a magnetic roller equipped with flexible dies to perform full cutting, half cutting (kiss-cutting), perforating, and creasing in a single pass. High Speed: Capable of processing up to 5,000 sheets per hour, making it significantly faster than traditional blade-based flatbed plotters for specific repeated shapes. Automatic Feeding System: Features a "fish-scale" feeding platform that ensures continuous, smooth feeding of sheets. Precision Alignment: Equipped with an automatic deviation correction system that aligns sheets precisely before they hit the cutting roller, ensuring accuracy even at high speeds. Compact Design: The machine is designed to fit into smaller print shops, occupying only about 2m of floor space. Waste Removal:Includes an automated waste separator that strips away the waste matrix (the unused material around stickers/labels) and deposits it into a bin, leaving finished products ready for collection. Technical Specifications Max Cutting Area 500 * 350 mm Min Paper Size 280 * 210 mm Max Speed | 5,000 sheets/hour | Die Plate Thickness | ~0.96 mm (Standard flexible magnetic dies) | Dimensions | Approx. 2420 * 840 * 1650mm Ideal Use Cases The MCT is best suited for businesses that need to bridge the gap between slow flatbed cutting and massive industrial rotary converting. It is ideal for: Sticker & Label Sheets: Rapidly kiss-cutting shapes on adhesive paper. Packaging: Creating small folding cartons or boxes. Tags & Cards: Cutting hang tags for clothing or playing cards with rounded corners. Summary The iEcho MCT is a production-grade solution for digital print shops needing to automate the finishing of sheet-fed labels and packaging. Its main value proposition is speed and automation in a small package, allowing operators to move from printed sheets to finished, stripped products in one step. Iajdpfjxz D I Ejx Addsl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, A Keyence 3D measuring system is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Keyence (Japan) • Model: XM-1500 (measuring system) • Measuring head: XM-T1000 • Year of manufacture: 2016 • With hand probe, adhesive plate • Measuring range: 300x250x150mm • Display unit: 1 µm • Angular resolution: 0.0001 ° • Max. workpiece weight: 25 kg • Condition: Used, functional The measuring machine was used until recently and is fully functional. Iaedpfox Himgsx Addjl Shipping costs by freight forwarder: approx. £100 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Application Types Iasdpex D I Hqsfx Addjl Edge Banding

Condition: excellent (used), Year of construction: 2018, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Iajdpfxewlbxlo Addol Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading