Used Adjusting Instrument for sale (19,749)

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Ijdpfx Asxhdqtsddsht Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Iodpfx Ajhaapfsddsht Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, Instrumentation Laboratory ILab Aries Clinical Chemistry Analyzer. ILab Aries can perform photometry, turbidimetry and potentiometry test. The throughput is up to 280 photometric +160 ISE tests/hour to give a total of 440 tests/hour. Iedpfeupwawox Addoht 280 photometric tests/hour, up to 440 tests/hour with the ISE module. Bench top system. Integrated sample bar code reader with host query. Sample Rack allowing the use of primary tube without the need for adapters, and cups. 68 sample positions with the possibility of continuous loading. Automatic pre-dilution of samples as required. Automatic re-run of test as required. Integrated Reagent bar code reader. Real-time update of reagent level, reagent stability, calibration stability. Low reagent level alarm. 56 refrigerated positions on board. Integrated ISE module for the determination of Na, K, and Cl on serum, plasma and urine. Up to 3 reagents per test. Multi point calibration curves with up to 8 calibrators. Automatic generation of calibration curves from a master calibrant. Compact size: W 1100 mm, D 650 mm, and H 500 mm Weight: 45 Kg Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 Ihjdpoxt H Hhjfx Addjt - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: excellent (used), Measuring stand Brand: Fischer Instrumentation (28635) Measuring table 80 x 80 mm Ihedpown E U Nofx Addst Installation size 110 mm

Condition: like new (used), Device like new Ijdpfx Adox E Sm Hedeht The new Discovery Hybrid Rheometer (DHR) series represents the latest technological advancements from the global leader in rheology. It combines a patented advanced drag cup motor, second-generation magnetic bearing, Force Rebalance Transducer (FRT), and a new, patent-pending True Position Sensor (TPS) in a single-head hybrid rheometer. DHR offers unprecedented performance and delivers unmatched precision for direct strain control, direct stress control, and normal force measurement. DHR includes all the popular TA innovations, such as patented Smart Swap geometries and the widest range of commercially available temperature systems and Smart Swap accessories. The result is the most advanced and versatile rheometer platform imaginable. The HR-1 model is a robust, precise, and field-proven rheometer. HR-1 utilizes state-of-the-art Discovery Hybrid Rheometer technology in a platform ideal for production control, asphalt manufacturing, and a wide range of general viscosity and viscoelasticity measurements.

Condition: used, This listing is for the Grant Instruments SUB 14 Water Bath The unit is in full working condition and is ready for immediate release Grant Instruments SUB 14 Water Bath – 14L A universal water bath, the Grant Instruments SUB 14 is known for its high quality, excellent temperature stability, and robust construction, making it ideal for a wide range of routine laboratory applications. Key Features Capacity: 14 Litres Temperature Range: Ambient +5°C to 99°C Temperature Stability: ±0.2°C Display: 2-digit LED for clear temperature indication Ihedpfx Ajxv A Nwsddot Heating Power: 700W Control System: Digital for reproducibility and precision Safety: Independent over-temperature cut-out to protect users, samples, and workplace Secondary over-temperature protection in case of control failure Construction: Stainless steel tank within a robust, durable outer case Designed to withstand demanding environments Applications Ideal for: Sample incubation Sample warming and thawing Media preparation Quality control testing Dimensions External: 45 cm (D) x 33 cm (W) x 26 cm (H)

Condition: excellent (used), TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Isdpfx Aohukh Noddeht Temperature range (max.) -150 to 1,000 ˚C Temperature accuracy ± 1 ˚C Furnace cooling time (air cooling)

Condition: used, functionality: fully functional, Instrumentation Laboratory GEM Premier 4000 Blood Gas Analyzer. The GEM Premier 4000 is comprehensive whole blood analyzer, offering a flexible analyte menu including pH, pO2, pCO2, electrolytes, metabolites and onboard CO-Oximetry. Yet it’s remarkably easy to use and maintenance-free, making the GEM Premier 4000 ideal for busy labs, use at the point-of-care and everywhere fast turnaround is mandatory. Easy to learn, simple to operate and complete, IL’s GEM Premier 4000 with iQM revolutionizes whole blood testing. Ihjdpfxjupvypo Addjt 2 for sale. 1 piece/350 EUR. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Amatek Inc. AC Power Source, REV.A, 7000 486 2, 5001iX 400 411 413 Model: 70004862 Type: 5001iX400411413 Isdsw D Dtpspfx Addeht Condition: Used Technical data: 400-480V AC 50-60Hz 8000VA General information: Output power: 5000 VA AC (output) Output voltage: 0–150 VAC / 0–300 VAC (switchable) Output frequency: 16–1000 Hz (frequency generator function) Phases: 3 Interfaces: LAN, USB, RS-232, GPIB (IEEE-488) Control: Front panel with LCD, rotary knob, keypad AC/DC power source and high-performance power analyzer

Condition: good (used), Various measurement cards & racks from NI available, see listing: To be sold completely or in parts Photos are exemplary NI PXI-1045 189105K-01L 2 units NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix 2 units NI PXI-6251 M Series Multifunction DAQ Isdpfjwpgy Aex Addjht NI PXI-8331 MXI-4 2 units NI PXI-6232 M Series Multifunction DAQ 10 units NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Contr 191435B-712 without Expresscard NI PXI-6229 M Series Multif DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 terminal board TBX-68 83420 DAQ Termination Board 3 units SCXI-1331 184268C-01 Rev. 3.1 2 units Cable 188841B-02 SH37F-SH37M-2 10 units See also my other test and measuring equipment. We also buy.

Condition: like new (used), Year of construction: 2007, Angle saw ECO INSTRUMENTS PDS Angle ranging from 45 to 90 degrees For precessing georgian bars and regular spacer bars Year of production: 2007 Ihjdpfx Ajiy Du Deddot Excellent condition Functioning, tested Available immediately

Condition: used, This listing is for the Grant JB2 Unstirred water bath without lid Ijdpsxhgdvjfx Addjht The unit is in full working condition and is ready for immediate use The Grant JB2 series of unstirred water baths are reliable, general-purpose laboratory devices ideal for sample warming, media preparation, and quality control. Available in different capacities and configurations, they are especially suited to educational, clinical, and light industrial use.

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Iedjhx Nchjpfx Addoht Operating humidity

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Type: ASTRONi 200-208V AC Iedpfx Asuyi U Ajddsht 50/60Hz 30A

Condition: used, This listing is for a Heraeus Instruments 7570 E Centrifuge Buckets. The unit is in full working condition and is ready for immediate release. The Heraeus 7570 E Rotor Buckets are designed to be used with compatible centrifuge rotors, providing flexibility and efficiency for various laboratory applications. Here’s a quick overview based on your mention of the 4 x Heraeus #7570 E Rotor Buckets: Heraeus #7570 E Rotor Buckets Key Features: Max Capacity: Each bucket has a maximum capacity of 600g, allowing for the centrifugation of a variety of sample types, including biological and chemical solutions. Compatibility: These buckets are specifically designed for use with Heraeus swinging bucket rotors, enhancing their versatility in centrifuge applications. Efficient Sample Processing: The design of the buckets facilitates even weight distribution and efficient separation, contributing to improved outcomes in sample processing. Material: Constructed from durable materials to withstand the rigors of repeated centrifugation cycles, ensuring reliability over time. Applications: Ideal for preparing biological samples, including cell cultures, blood products, and other laboratory specimens that require high-speed centrifugation. Iedpfx Asxxy H Eeddjht Benefits: Scalability: Having 4 buckets allows for simultaneous processing of multiple samples, increasing throughput in laboratory settings. Versatility: Supports various sample sizes and types, making it a valuable addition to any lab utilizing Heraeus centrifuges.

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. RF Generator 13.56MHz, 10.5kW, QL10513, SurePower Model: QL10513 Type: SurePower Ijdpfx Adsuyi Uijdeht

Condition: used, This listing is for a Grant Instruments LMC-3000 Centrifuge Isdpsxzg Emsfx Addoht The Grant LMC-3000 is a low speed benchtop centrifuge ideal for biomedical applications.

Condition: used, This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter Ihjdjxzg Rcepfx Addst

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ihsdpfx Aoxzg Eyjddot Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, control type: NC control, working width: 2,520 mm, sheet thickness (max.): 4 mm, overall weight: 3,720 kg, TECHNICAL DETAILS Sheet width: 2,520 mm Sheet thickness: 4 mm Upper beam stroke: 250 mm Folding beam adjustment: 80 mm MACHINE DETAILS Control type: NC Dimensions & Weight Dimensions (L x W x H): 3,150 x 805 x 1,425 mm Isdpfx Aox I Eqqoddsht Machine weight: approx. 3,720 kg Upper beam drive power: 2.2 kW Folding beam drive power: 3.0 kW EQUIPMENT Foot switch Electric backgauge Sharp-edge rail

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 9,874 h, bending force (max.): 173 t, working width: 4,250 mm, stroke length: 600 mm, throat depth: 420 mm, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Ijdpfxsx R S S Hj Addeht Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. Ijdox Srklspfx Addoht TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping Iodpfx Aox I D T Roddjht 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Weight: 7,000 kg EQUIPMENT Ijdex I D E Hjpfx Addoht Foot pedal Hydraulic upper tool clamping 2 manually adjustable backgauge fingers Tooling