Used Adk 125 for sale (3,910)

Year of construction: 1987, condition: good (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 6 x 125 m³ Aluminum storage silo with a long base ring (plastic granulate silo) Technical data / Dimensions Available quantity: 6 Volume: approx. 125,000 liters Tsdpj Ahfkfofx Abusd Year of manufacture: 1982-1987 Container type: Silo Condition: used Food-grade: no Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,020 mm Total height: approx. 16,250 mm Weight: approx. 2,300 kg Specific weight of the medium: 0.6 t/m³ Operating pressure: Non-pressurized Wall thickness, bottom: approx. 4 mm Wall thickness, top: approx. 4 mm Wall thickness, shell / cylinder: approx. 3 - 5 mm Ground clearance: approx. 900 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Note: Material AlMg3 Equipment Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 90 degrees Top: Silo 1-3 (Year of manufacture 1982): 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition bridge with railing 4 x Crane eye 1 x Manhole DN 500 with threaded coupling (level monitoring) 1 x Flange DN 100 (filling) 2 x Vent pipes with cap Silo 3-6 (Year of manufacture 1984 - 1987): 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition bridge with railing 4 x Crane eye 1 x Overpressure / underpressure protection, ø 500 mm 1 x Vent DN 200 1 x Flange DN 100 (level measurement) Shell: 1 x Operating room door (approx. 1,800 x 850 mm) 1 x Cable protection tube ø 40 mm 1 x Filling line DN 100 1 x Threaded coupling 1 1/2" for empty signal 1 x Threaded coupling 1 1/2" for full signal Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with an emergency shut-off valve and a suction box. Fittings available Note: A matching access ladder (single-flight) can be purchased optionally (extra charge: €1,500 plus VAT). The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its perfect functioning.

Condition: excellent (used), functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, year of last overhaul: 2026, total length: 1,900 mm, total width: 1,150 mm, total height: 1,270 mm, input frequency: 50 Hz, type of input current: three-phase, - with hydraulic container locking system - including 2 containers - digital control with program memory - painted finish - 190x115x127 cm (l x w x h) - Container drive motor shaft, right side 20 mm, left side 30 mm Tsdpfx Abez Imb Ssujd - Electrical power 400V | 3Ph | 50Hz - Voltage 22 Kw - 12-month warranty

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. Tedpfx Aboz Egzmoued An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: excellent (used), Professional digital micrometer from the renowned Mahr brand – model Micromar 40 EWR(i) – designed for extremely precise measurements with an accuracy of up to 0.001 mm. The device, in an IP65 version that is dust and water-resistant, is ideal for use in metrology, quality control, and industrial workshops. Measurement range: 100 – 125 mm Accuracy: 0.001 mm Digital display with a large, clear LCD screen Todez Slhnopfx Abusd Protection rating: IP65 – dust and splash resistance “ABS” and “Hold” functions – quick measurement stop and zeroing function High-rigidity body, ergonomic grip Includes original box, certificate, operating manual, and 100 mm measuring standard Condition: practically new / used only for testing

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Tsdpfx Absz Nplkjujd Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: used, operating hours: 378 h, lifting height: 3,350 mm, motor manufacturer: Elektro, gearing type: automatic, Toyota SPE 125 high-lift forklift, year of manufacture: 2011, battery: 10/2025, hours: only 378!, previous owner: German Armed Forces, rated load capacity: 1,250 kg, fork length: 1,150 mm, lift height: 3,350 mm, triplex mast, includes charger, clearance height: 1,700 mm, UVV valid until 07/2027, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! = Further information = Year of manufacture: 2011 Lifting capacity: 1,250 kg Tode Aftqzjpfx Abusd Overall height: 170 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling this lathe, which has already been disconnected and is stored in our warehouse. A video of the machine can be sent via WhatsApp. The machine does not have steady rests. Swinging diameter over the bed: 1320 mm Swinging diameter over the carriage: 950 mm Turning length: 6,000 mm Tsdez En Dvepfx Abuod Max. workpiece weight: 14,000 kg Machine weight: 18,500 kg General overhaul performed in 2009.

Condition: excellent (used), Year of construction: 2024, thickness of jaw 125 mm clamping range 0-182 mm clamping range 131-313 mm weight of the machine ca. 35 Kg dimensions of the machine ca. 483 x 126 x 140 mm Tsdpfx Ae Afzydjbujd

Condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 2 x 125 m³ Aluminum storage silo with a robust base ring (plastic granulate silo) Technical data / Dimensions Available quantity: 3 Volume: approx. 125,000 liters Container type: Silo Condition: used Food-grade: no Design: upright Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: Non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Ground clearance: approx. 500 mm Material / Features Material, inner shell: Aluminum Internal welds ground smooth Notes: Material: AlMg3 / AlSi Equipment Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Todeznn Ntjpfx Abusd Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 90 degrees Top: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition platform with walkway 2 x Crane eye 1 x Manhole DN 500 with safety grating 1 x Flange DN 100 (filling line) 1 x Flange DN 300 (level measurement) 1 x Threaded socket for max. probe 1 x Flange DN 100 (filling) 1 x Vent DN 200 with cap Shell: 1 x Operating room door (approx. 1,800 x 850 mm) 1 x Cable protection tube 1 x Filling line DN 100 ending in a TW connection 1 x Threaded socket 1 1/2" for empty indicator Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off slide valve and suction box. Fittings available Notes: An associated access ladder (two-section) can be optionally purchased (additional cost: €1,500 plus VAT). The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its proper function.

Condition: used, Feutron Temperature Test Chamber -40 to +100°C The Feutron TPK 3403/125, due to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing Tedpfoy Nynaox Abujd This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sampling inspection: Tests carried out during series production to ensure that the production process meets the specified temperature ranges. Standard testing: Performing tests according to common industry standards (e.g., DIN EN 60068), which specify certain temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 050301, load capacity: 25 kg, pivoting range: 360 °, Equipment: documentation/manual, Following four folding carton gluing machines, a system for the automatic palletizing of finished products is installed. A robot stacks the cartons by type onto pallets. In the robot's working area, stacks of empty pallets and stacks of interleaving sheets are kept ready for palletizing. The robot also separates the empty pallets and inserts interleaving sheets according to the program. The cartons from the four machines are stacked with a maximum carton output of a total of 500 cartons per hour. • Maximum stacking height: 1,900 mm including the pallet • Usable pallets: 800 × 1,200 mm wooden Euro pallet; 800 × 1,200 mm disposable wooden pallet; alternatively, only new Euro pallets; • Maximum carton weight: 25 kg • Maximum pallet weight: 1,000 kg • Rejection function for non-conforming cartons Interleaving sheet • 300 – 400 g/m² carton or corrugated cardboard / gray cardboard • Carton sheet size: 700 x 1100 or smaller The machine can be inspected during ongoing operation. Todpfx Abo Agvmieujd

Condition: good (used), functionality: fully functional, Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control – A LOT of accessories – CE compliant!!!! Technical data: >> Machine no. 334511, year of manufacture approx. 1995 Working area: Maximum diameter: Over the cross slide 270 mm Over the carriage 115 mm In the spindle bore 28 mm Largest chuck size 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X / Z axis, stepless 0-5000 mm/min Rapid traverse X / Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo Tjdpfx Asz Ezc Sebuod About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control. The machine was manufactured around 1995 and comes with a large number of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to verify its condition.

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. Tjdjz Slrtspfx Abuod KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system.

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling Tedpfx Absz Arhiousd HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1992, condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 4 x 125 m³ Aluminum storage silos with a base ring (plastic granulate silo) Technical data / Dimensions Available quantity: 4 Volume: approx. 125,000 liters Year of manufacture: 1992 Container type: Silo Condition: used Food-grade: no Design: vertical Tsdpfxo Ahfk Rs Abuod Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 0.6 t/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Ground clearance: approx. 900 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material AlMg3 Equipment Base design: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 90 degrees Top: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition walkway with railing 2 x Crane eye 1 x Manhole DN 500 with hinged cover and safety grille 1 x Vent DN 200 with hood 1 x Flange stub DN 100 (filling) 1 x Flange DN 200 (level measurement) Shell: 1 x Operating room door (approx. 2,000 x 850 mm) 1 x Cable protection conduit ø 60 mm 1 x Filling line DN 100 ending in a Storz coupling 1 x Threaded socket 1 1/2" for empty signal 1 x Threaded socket 1 1/2" for full signal Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off slide valve and extraction box. Various pipe penetrations in the area of the base ring. Fittings available The measuring and control technology installed on the silo is included free of charge. However, no guarantee can be given for its perfect functioning.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 6 x 125 m³ Aluminum storage silos with a long base ring (plastic granulate silos) Technical data / Dimensions Available quantity: 6 Volume: approx. 125,000 liters Year of manufacture: 1988-1993 Container type: Silo Condition: used Food grade: no Design: vertical Inner diameter: approx. 3,500 mm Outer diameter: approx. 3,550 mm Cylindrical height: approx. 14,965 mm Overall height: approx. 16,150 mm Weight: approx. 2,400 kg Specific gravity of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 4 mm Tedpfo Ahfnbjx Abujd Wall thickness, top: approx. 4 mm Wall thickness, shell/cylinder: approx. 4 - 5 mm Ground clearance: approx. 900 mm Material / Construction Material, inner lining: Aluminum Internal welds ground smooth Note: Material AlMg3 Equipment Base design: Foot ring/base ring Quantity: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Cone angle: 90 degrees Top: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Transition bridge with railing 4 x Crane lugs 1 x Manhole DN 500 with hinged cover and safety grille 1 x Vent 1 x Flange DN 100 (filling) 1 x Flange DN 100 (level measurement) Shell: 1 x Operating room door (approx. 1,800 x 850 mm) 1 x Cable protection conduit ø 50 mm 1 x Filling line DN 100 1 x Threaded socket 1 1/2" for empty signal 1 x Threaded socket 1 1/2" for full signal 4 of the silos have their own filling connection (4" - Storz coupling), and in 2 silos, the filling line is connected to a filling station (the filling pipe is cut to operating height during disassembly). Bottom: The silos end at the bottom in a 90° cone with a DN 150 flange with an emergency shut-off valve and a suction box. Notes: The measuring and control technology installed on the silo will be included free of charge. However, no guarantee can be given for its proper functioning.

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Tjdpfo Aa Im Tsx Abusd Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Todpfx Absz Nfbzsuod Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Tedpfozzz Szsx Abujd Bowl protection grid Electromechanical controls Analog timer Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Working area: Permissible diameter: over the carriage 270 mm over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tedpsz Ezc Eofx Abusd Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, overall weight: 990 kg, Technical Specifications Product Number HA 125 Year of Manufacture: 2010 Dimensions of the loading chamber: 115x115Wx560mm Height: 2000 mm Width: 1200 mm Length: 2200 mm Total Power: 7.5 kW Power Supply: Electrical: 400V 50Hz 5N Main Material: Stainless Steel, acid-resistant Max Weight: 970 kg Machine in perfect condition after servicing New hydraulic oil New safety sensor for the flap New bearings and seals in the main gearbox Possibility to produce cubes with dimensions: 29 x 29 mm – Or other dimensions depending on customer needs – We can change the blade spacing or add more blades Maximum cube length 70 mm, hydraulically adjustable Purpose: Slicing into slices, cubes, and strips Cutting boneless meat, cured meats, ham, bacon, lard, fish, and vegetables and fruits – fresh and chilled products at a temperature of +4°C – 0°C Application in small meat processing plants, supermarkets, catering companies and food service businesses General characteristics: Mechanical performance: 1900 kg/h Compact design Made of high-quality steel The device meets the highest hygiene standards Tsdpfjz I Eqrsx Abued Easy and quick to disassemble components Net price Video showing how it works:

Condition: ready for operation (used), overall weight: 1,780 kg, load capacity: 125 kg, arm reach: 3,200 mm, ABB IRB 6600-125/3.2 Type B M2004 Robot Load capacity: 125 kg Reach: 3200 mm Footprint: approx. 1,136 × 850 mm Path repeatability: approx. ±0.3 mm Positional repeatability: ±0.1 mm Axes: 6 Weight: 1780 kg Year of manufacture: 2007 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Todpfszz Hqcex Abuod Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Lagun GUM 125 milling machine in very good condition, equipped with 3 axes, Fagor digital readout, variable feed, and spindle speeds. Specifications: Spindle taper ISO 40 Speed ​​35-1800 (variable) Travel X850 Y290 Z475 mm Table dimensions 1250 x 280 mm Automatic feed X, Y & Z High-speed X, Y & Z Motor 7.5 hp-400V Digital readout Fagor 3 axes Tjdpjzrlawjfx Abusd Year of manufacture 2000 Dimensions (L x W x H) 2050 x 2220 x 2050 mm Weight 1900 kg Variable speed with digital readout in 2 gear ranges, variable feed rate with digital readout. Includes Huron milling head, machine vice and tool holder.

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 Tsdpjzl Dg Njfx Abued KM No. 6268540 KM No. 6441936 R901196471

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Cold and Heat Shock Testing Chamber – Temperature Shock Chamber, -80 °C to +220 °C – 125 Liters Vötsch VT³ 7012 S2 Industrial temperature shock testing chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock testing chamber, model VT³ 7012 S2. The unit is suitable for testing components, electronic parts, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of -80 to +70 °C. The testing chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock testing chamber / Temperature shock chamber Year of manufacture: 2016 Equipment number: 58566224220040 Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Operating hours according to control display: 4,800.5 h Weight: approx. 1,000 kg (estimate, not weighed) Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: -80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standing pressure: 14 bar(g) Equipment: Tsdpfx As Agm Ucjbujd Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measurement and control functions Scope of delivery: 1 × Vötsch VT³ 7012 S2 temperature shock testing chamber with integrated touchscreen control and existing equipment as shown in the picture. Other accessories not shown in the picture are not included in the offer. Condition: Used Optically well-maintained condition with typical signs of wear. The unit can be switched on. Touchscreen control, temperature displays, and interior lighting are functioning. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to change, errors, and prior sale. We would be happy to answer any further questions by telephone.