Used Advertising Material for sale (16,322)

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Iasdpfx Aexw Rcujddel Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: new, Year of construction: 2025, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Iaodpew U Scfjfx Addol Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Desiccant dryer with granulate silos and material separator Manufacturer: Piovan Model: DSN521NE No.: ODE 6242 4 insulated granulate silos, each 200 L With additional heating 3 material separators Manufacturer: Colortronic This system has been tested for all functions and is fully operational! Iodpox Na Itjfx Addoal

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Iaedpfjvkn Irjx Addsl

Condition: excellent (used), power: 160 kW (217.54 HP), fuel type: diesel, color: blue, Year of construction: 2023, operating hours: 35 h, Year of manufacture: 2023 Drive: Wheeled Number of cylinders: 6 Unladen weight: 33,800 kg Iaedpfx Adexcvuyjdjl CE marking: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2023 – UNUSED DEMO VEHICLE Engine: Deutz 160 kW Boom reach: 16 m, Boom: 8.5 m, Stick: 7.2 m Hose rupture protection on the boom Cab: Fuchs Fox Cab hydraulic cab elevation Air conditioning Build: Standard Fuchs color Central lubrication Undercarriage: Mobile, 4 stabilizers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab Technical data Number of cylinders: 6 Fuel type: Diesel FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, GENERAL INFORMATION Comments: Internal width: 5,940 mm • Internal depth: 2,000 mm • Internal height: 2,000 mm • Exterior walls and roof: trapezoidal galvanized sheet metal • Interior walls: trapezoidal galvanized sheet metal • Interior ceiling: trapezoidal galvanized sheet metal • Floor: wooden floor made of tongue-and-groove planed boards • Roof drainage: via longitudinal gutters • Door type: double-leaf door Iaodpfxoxqdpus Addol Total width: 2,170 mm Total height: 2,150 mm Total length: 6,080 mm Location: Bremen Condition: used

Condition: ready for operation (used), many parts overhauled and renewed Iaodpoxxb Ukefx Addjl

Condition: ready for operation (used), Year of construction: 2007, Reinforced hardox vibrating hopper Hopper width 110 CM BRAND: KLEEMANN TYPE: M10019628 N°: 406205132 Iaodjvdqpxspfx Addjl

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,400 kg, loading space volume: 2.78 m³, inner dimension height: 1,500 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Maximum temperature: 190 °C Interior dimensions Internal usable volume: 2.78 m³ Internal dimensions (H x W x D): 1,500 x 1,600 x 1,100 mm Recirculation fan speed adjustable range min.: 50% Recirculation fan speed adjustable range max.: 120% Minimum exhaust air volume flow (exhaust mode): 360 m³/h Reduced exhaust air volume flow (recirculation mode): 90 m³/h Air change rate: 5 times per 300 sec. Total steam chamber volume: 4.5 m³ MACHINE DETAILS Weight: approx. 1,400 kg Ijdpexurx Sefx Addsal Filter class: H13 EQUIPMENT S!MPATI software Vacuum connection Cleanroom certification

Condition: excellent (used), Year of construction: 1998, Angel ES 650W500V/200HL. 2F 2 component machine tie-bar-less Iodpfegrafvox Addsal 2000 KN clamping force Screw diameter Aggr.1: 45 mm, Aggr.2: 45 mm Max. Stroke volume Aggr.1: 226 cm³, Aggr.2: 183 cm³ Installation dimensions WKZ: min 250 mm, max 750 m Year of manufacture: 1998

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Isdpfxowvv Rqo Addeal Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Iaedpfxjfmqq Eo Addol Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A Iasdpfx Adjtp Df Hsdel • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Year of construction: 2025, condition: new, Material support stand No. 100006, height 650-1050 mm, powder-coated, RAL 7011 Iedpfx Adoxqrghodjal

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material agitator from a pellet production line. Thanks to the mixer, the material supplied to the pellet mills is homogeneous. Line capacity where the agitator was used: approx. 8 t/h Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Ribbon diameter: approx. 1400 mm, Motor power: 22 kW, Agitator price: 25,000 Euro, Isdpjwxatbjfx Addjal We also offer a bag filter for the mixer, as shown in the production line photos. Filter price: 7,000 Euro, The machine can be inspected in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Plant as new, used only three times!!! Hammer mill Type: HMC-4 Motor power: 4 kW Number of hammers on rotor: 16 Capacity: 150–350 kg/h Material extraction system Type: FM300SN Output: 3900 m³/h Motor power: 2.2 kW Iedpfxsx Dhbzo Addjal This plant is suitable for shredding both plastic parts as well as wooden slats and branches.

Condition: like new (used), functionality: fully functional, Offered are 16 material silo containers with a capacity of 500 to 1,250 liters each, equipped with a double extraction box. The containers are in very good condition and come from a cleanroom production facility where only PP material was processed. Iaedpjwpp Ebsfx Addsl

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Iodpexz Tg Dofx Addsal Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: excellent (used), Material receiver for sander or planer Total length: 4500 mm Total width: 120 mm Pneumatic discharge Roller width: 260 mm Iaodpfex Ahhrsx Addel

Condition: used, functionality: fully functional, Layher Allround U-Console with Pin 0.39 m – used This used Layher AR U-console with pin (length 0.39 meter) is specifically designed to create additional working width on your Layher Allround scaffolding system. Ideal for extending work platforms towards facades or for maintenance and renovation tasks that require more space. ✅ Features: Length: 0.39 meter Design: steel (lightweight LW version), robust and durable Original Layher Allround system component Quick and safe installation without special tools needed Used condition: fully functional, with normal signs of use ✅ Benefits: A cost-effective alternative to new parts. Available directly from stock, also in larger quantities. Iajdpfxjwzxcmo Addjl Reliable Layher system material, globally recognized for its quality. 👉 Availability & delivery: Large quantities in stock. Worldwide delivery possible. Collection is also possible. Separate quotations are made for large orders.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Granule dryer PIOVAN with material loader Ijdox Hylmepfx Addeal

Condition: good (used), Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg Iaedpjcwdmksfx Addel

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Iaedpsxf Ut Hsfx Addel Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs Iaedpfxjxz Ax Ns Addjl

Condition: used, functionality: fully functional, Layher Ledger 1.40 m Used – Strong Horizontal Connection for System Scaffolding This used Layher ledger of 1.40 meters is an essential component of the Layher Allround scaffolding system. The ledger provides a solid horizontal connection between uprights, thereby contributing to the overall stability, strength, and safety of the scaffold structure. The ledger is made from galvanized steel and is suitable for repeated professional use in construction, renovation, and industrial projects. Iodpfx Aow H Sbgsddjal 🔧 Technical Specifications Brand: Layher Type: Allround system Length: 1.40 meters Material: Galvanized steel – weather-resistant and durable Condition: Used, technically inspected and fully functional ✅ Why choose this used ledger? Genuine Layher quality at a competitive price Ready for immediate use, suitable for heavy-duty applications Ensures stable horizontal connections Fully compatible with Layher Allround components Available from extensive stock Application This ledger is used in Layher Allround scaffolding systems to create strong horizontal connections between uprights. Indispensable for maintaining structure, alignment, and even load distribution, especially with multi-level scaffolds.