Used Air Dry Machine for sale (85,812)

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout Bodpfxsglpywj Abusdi - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Condition: excellent (used), Year of construction: 2015, PROD. ALUP TYPE ADQ1440 S/N CAI834014 Bdedpoz E Ru Dofx Abuji YEAR 2015 POWER (kW) 6.3 CAPACITY (m3/min) 24 PRESSURE (bar) 13 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R404a 5kg EXCHANGER REFRIGERANT 404A - 5kg ON THE TANK DOCUMENTS CONNECTION DN125 NEW/USED USED

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 Bjdsw Dppvopfx Abujdi The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. Bjdpfsymahyox Abuedi It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel Bodpfx Asymaw Uobusdi NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: good (used), Year of construction: 2011, Refrigerant dryer Manufacturer: Atlas Copco Type: FD150 Bodpfx Ajzvqwcobuedi Year of manufacture: 2011 Power: 1 kW Volumetric flow rate: 9 m³/min

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Bdedpfx Abez Ek R Esuoi Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Bjdpfjwi S Ixox Abuodi Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Art.-Nr.: 2294 year: 2004 Bedpfx Absxltdwjuodi price: 7.400.00 contact: Mr. Rainer Eckerle

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Bodpfxjvrkhkj Abujdi Volume flow max. 250 liters/min. = 15 m³/h Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg good condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Bdedpovzwrbofx Abusi Model ERD 65 B Connected load 0.9 kW

Condition: used, machine/vehicle number: XLWRT222079306537, fuel type: diesel, color: other, gearing type: automatic, operating hours: 21,826 h, Year of manufacture: May 2007 Year of construction: 2007 Axle 1: left 18 mm right 18 mm Bdodpjy T H Arofx Abuoi Axle 2: left 6-6 mm right 6-6 mm Axle 3: left mm right mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Refrigerant dryer ALUP ADQ 2100 Bdjdpfxozmwr Io Abusi capacity: 35,000 l/min; year of manufacture: 2017. net price: 19,500 PLN gross price: 23,985 PLN

Condition: used, Year of construction: 2018, type of input current: three-phase, input current: 15 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Asso 600 digital print machine dryer, year of construction 2018, PERFECTLY functional + extra motor (never had to use, just have it for backup) Power: 9.5 kW Phases: 3+PE Current: 15 A Bdjdpfx Aszzd Nvebuji Voltage: 400 V Frequency: 50/60 Hz Serial number: 1908 Product code: 1390047 Year of manufacture: 2018 Weight: 440 kg Location: HUNGARY, Szolnok 5000 ZIP If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Ingersoll Rand TS3A compressed air refrigerated dryer, 12 bar For sale is a used, professional compressed air refrigerated dryer from the manufacturer Ingersoll Rand – model TS3A, manufactured in 2008. Technical specifications: - Max. air pressure: 12 bar (175 psig) - Max. air inlet temperature: 60 °C (140 °F) - Cooling system: Air-cooled - Operating voltage: 400V / 3Ph / 50Hz - Refrigerant: R404A (3.36 lbs / 1520 g) - Refrigerant oil type: ISO 32 Polyol Ester (POE) Bdsdexl D Adjpfx Abuoi - Power consumption: 4.8 kW - Weight: 230 kg Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2010, PROD. ATLASCOPCO Bdjdpfx Aoz Izfrebusi TYPE FD285 S/N CAQ434195 YEAR 2010 POWER (kW) 2.2 CAPACITY (m3/min) 17.1 PRESSURE (bar) 14 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER R410a 1.28kg EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION 2 1/2 NEW/USED USED

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,000 h, functionality: fully functional, volume flow: 342 m³/h, pressure dew point: 3 °C, type of cooling: air, For sale is a used Kaeser TD 51 refrigerant dryer from our company’s stock. Manufacturer: Kaeser Type: TD 51 Year of manufacture: 2001 Operating hours: approx. 46,275 h (Operating hours taken from the associated compressor) Available from: December 2026 Bodpfjz R I T Rox Abuodi The dryer is currently in operation and functions without any known issues. The condition is good. The unit has been regularly maintained and reliably used in ongoing operations. We are not aware of any technical defects. An on-site inspection is possible after prior arrangement.

Condition: used, Zwick Testing Machine Bdjdszil Upjpfx Abuoi Type: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions H x W x D: 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer, 13.5 mm MFA 25 extensometer (temperature range up to +200°C) Computer + testXpert II V3.5 software Climate chamber: Airtemp LKG-K-TK-50 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, Vibrating Fluid Bed Dryer Machine for Granule Bodpe Ad Uqgofx Abusdi

Condition: used, functionality: fully functional, Manufacturer: Schröder & Co. Type: Laboratory scraper heat exchanger Bdsdezv T Hyepfx Abuji Stages: - 2 heating stages - 1 cooling stage Product: Last used for microparticulation Condition: good, fully functional

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Bdodpszf Ivusfx Abuji Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: repair required (used), Two desiccant dryers in need of repair. Bdodpextvb Iefx Abuoi Suitable for a hobbyist or as a source of spare parts. Type MDC 800 Capacity: 42 kW Year of manufacture: 1990 and 1994 PRICE REDUCED FROM 2850 TO 1200 EUR FOR BOTH!!!

Condition: used, Year of construction: 2014, machine/vehicle number: APF194822, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Bjdpfx Aszclgajbusdi Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: excellent (used), functionality: fully functional, ATLAS COPCO CD 80 adsorption dryer Bodpfx Aszm Ip Rjbujdi Technical specifications: capacity: 4800 l/min; dryer is in fully working condition; net price: 3500 PLN gross price: 4305 PLN

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C Bdsdorfyrpjpfx Abuji IP classification IP 44 standard